Unterschiede zwischen den Revisionen 5 und 29 (über 24 Versionen hinweg)
Revision 5 vom 22.08.2007 11:36
Größe: 260
Autor: MoinAdmin1
Kommentar:
Revision 29 vom 18.12.2014 13:46
Größe: 1420
Autor: LotharF
Kommentar:
Gelöschter Text ist auf diese Art markiert. Hinzugefügter Text ist auf diese Art markiert.
Zeile 5: Zeile 5:
Here is our english discussion board: http://mikrocontroller.cco-ev.de/forum/forum-17.html /!\ Here is our english discussion board: http://mc.mikrocontroller.com/forum/forum-17.html
Zeile 7: Zeile 7:
<<BR>>
 * English Mikrokopter home page in the WiKi: [[en/MikroKopter]]
<<BR>>
= Checklist: =
You need at least these components to build a MikroKopter:

<<BR>>
 * FlightCtrl board
 * 4x BrushlessCtrl boards (speed controllers)
 * SerCon board (for programming and debugging)
 * 4x Brushless Motor (eg: Robbe [[ROXXY2824-34]])
 * [[RC-Empfänger|Receiver]] (35Mhz) that offers the "multi" signal (muxed signal holding all channels)
 * 6-channel Sender (35Mhz)+battery+charger (most used: Graupner MC12, MX12 which have extra switches)
 * cristal-pair for both sender+receiver
 * Frame material (most used: [[MK-40-Rahmen|10mm square Alu profile with 40 cm Motor-distance]] and 2x CenterPlate)
 * 4x Propeller EPP1045: 2x clockwise-rotating, 2x counterclockwise-rotating (if possible order 10 pairs or more)

(order at Lipoly.de or CNC-Modellsport.de). Alternative: X-Ufo (8") props for smaller MK's
 * Prop-holders or Propsaver (fit for your Motor). NOTE: EPP1045 requires a 3mm shaft
 * LiPo-Battery (if possible at least 2)
 * LiPo-charger + balancer
 * other small parts like fasteners, cables, connectors

<<BR>>
Zeile 8: Zeile 32:
[[FullSearch(KategorieEnglish)]] <<FullSearchCached(KategorieEnglish)>>

<<BR>>

If you need help regarding this wiki: HelpContents

Here you find a small WikiCourse/BasicIntroduction

/!\ Here is our english discussion board: http://mc.mikrocontroller.com/forum/forum-17.html



Checklist:

You need at least these components to build a MikroKopter:


  • FlightCtrl board

  • 4x BrushlessCtrl boards (speed controllers)

  • SerCon board (for programming and debugging)

  • 4x Brushless Motor (eg: Robbe ROXXY2824-34)

  • Receiver (35Mhz) that offers the "multi" signal (muxed signal holding all channels)

  • 6-channel Sender (35Mhz)+battery+charger (most used: Graupner MC12, MX12 which have extra switches)
  • cristal-pair for both sender+receiver
  • Frame material (most used: 10mm square Alu profile with 40 cm Motor-distance and 2x CenterPlate)

  • 4x Propeller EPP1045: 2x clockwise-rotating, 2x counterclockwise-rotating (if possible order 10 pairs or more)

(order at Lipoly.de or CNC-Modellsport.de). Alternative: X-Ufo (8") props for smaller MK's

  • Prop-holders or Propsaver (fit for your Motor). NOTE: EPP1045 requires a 3mm shaft
  • LiPo-Battery (if possible at least 2)

  • LiPo-charger + balancer

  • other small parts like fasteners, cables, connectors


English wiki pages