|
Größe: 3022
Kommentar:
|
Größe: 5411
Kommentar:
|
| Gelöschter Text ist auf diese Art markiert. | Hinzugefügter Text ist auf diese Art markiert. |
| Zeile 15: | Zeile 15: |
| <<BR>> {i} These pages can be called directly with the '''"Help (Hilfe)"''' button from the settings configuration dialog box. |
<<BR>><<BR>> = Infos for the Konfig Dialog = {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=80252&g2_serialNumber=4}}<<BR>> If you klick the '''"Help"'''-Button in the dialog box, you can open the informations in the Wiki of the side you have open.<<BR>> To open this Wiki sides you need a internet connection.<<BR>><<BR>> In a total of five sets of parameters different settings can be stored in the Kopter. These can be accessed through the sticks after turning on the Kopter and the initialization.<<BR>> == Select the single Settings with the transmitter == Setting 1 = Throttle up / Yaw left + Roll left <<BR>> Setting 2 = Throttle up / Yaw left + Nick up / Roll left <<BR>> Setting 3 = Throttle up / Yaw left + Nick up <<BR>> Setting 4 = Throttle up / Yaw left + Nick up / Roll right <<BR>> Setting 5 = Throttle up / Yaw left + Roll right <<BR>><<BR>> Each setting can be named under '''''Name of configuration''''' with a representative name. <<BR>> This is useful for example for different payloads, sporty flying or camera-flight etc. <<BR>> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=82229&g2_serialNumber=2}}<<BR>><<BR>> If a setting is completed or altered it must be saved under it's number in the MikroKoper with the function '''''WRITE''''' . <<BR>> The MikroKopter acknowledged this with a appropriate number of short beeps. <<BR>> <<BR>> {i} Each set must be saved individually! <<BR>> <<BR>> If you want to see which setting you have allready into your Kopter, klick on '''''Read''''' and the settings will be loaded. <<BR>> <<BR>> With '''''Save''''' and '''''Load''''' each set can be saved and loaded from the PC. The parameter sets can be viewed with a text editor and printed, too.<<BR>> Thus, it is for example possible to compare the parameters of the 5 different settings on the airport without a laptop while flying.<<BR>><<BR>> If you want to change the single settings back to default, klick on the red triangle {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=82230&g2_serialNumber=1}}. <<BR>><<BR>> /!\ '''Note:''' Please write in a not used setting valid data (eg Content Setting 3). This save you not to use a setting without data! <<BR>><<BR>> /!\ '''Note:''' '''Don't change a setting during flight''' (e.g. using Wi.232 etc.) - the MK can tilt and/or crash then! So always land first, then write settings and start again. <<BR>><<BR>> |
Page in 
Page en
Configuration parameters in MikroKopterTool
In these pages are the different configuration parameters of the Mikrokopter Tool.
A general description of controllers, definitions and concepts can be found in the wiki at Summary Explanations.
Each side can be opened by clicking on the tabs below to get more information from the configuration dialog:
Infos for the Konfig Dialog
If you klick the "Help"-Button in the dialog box, you can open the informations in the Wiki of the side you have open.
To open this Wiki sides you need a internet connection.
In a total of five sets of parameters different settings can be stored in the Kopter. These can be accessed through the sticks after turning on the Kopter and the initialization.
Select the single Settings with the transmitter
Setting 1 = Throttle up / Yaw left + Roll left
Setting 2 = Throttle up / Yaw left + Nick up / Roll left
Setting 3 = Throttle up / Yaw left + Nick up
Setting 4 = Throttle up / Yaw left + Nick up / Roll right
Setting 5 = Throttle up / Yaw left + Roll right
Each setting can be named under Name of configuration with a representative name.
This is useful for example for different payloads, sporty flying or camera-flight etc.
If a setting is completed or altered it must be saved under it's number in the MikroKoper with the function WRITE .
The MikroKopter acknowledged this with a appropriate number of short beeps.
Each set must be saved individually!
If you want to see which setting you have allready into your Kopter, klick on Read and the settings will be loaded.
With Save and Load each set can be saved and loaded from the PC. The parameter sets can be viewed with a text editor and printed, too.
Thus, it is for example possible to compare the parameters of the 5 different settings on the airport without a laptop while flying.
If you want to change the single settings back to default, klick on the red triangle .
![/!\](/moin_static199/mk-style3/img/alert.png "/!\"){kind=small}
Note: Please write in a not used setting valid data (eg Content Setting 3). This save you not to use a setting without data!
Note: Don't change a setting during flight (e.g. using Wi.232 etc.) - the MK can tilt and/or crash then! So always land first, then write settings and start again.