Unterschiede zwischen den Revisionen 6 und 8 (über 2 Versionen hinweg)
Revision 6 vom 28.04.2010 22:56
Größe: 1003
Autor: anonym
Kommentar: converted to 1.6 markup
Revision 8 vom 24.02.2011 11:27
Größe: 1513
Autor: HolgerB
Kommentar: exchanged picture
Gelöschter Text ist auf diese Art markiert. Hinzugefügter Text ist auf diese Art markiert.
Zeile 8: Zeile 8:
{{attachment:MK-Parameter/Channels/channels.gif}} {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=70346&g2_serialNumber=1}}
Zeile 13: Zeile 14:
= Using the other channels =
= MotorSafetySwitch =
In the past it happened that users switched off the MK during flight by moving the gas/yaw stick into the left corner. Especially in the vario-altitude control mode that could happen

Now this can be avoided via a seperate channel.

On/off is disabled if the value of this channel is below 35

{i} Tip: you can put this onto the channel of the altitude controller. So you can't switch off with enabled hight-control

== Using the other channels ==
Zeile 17: Zeile 28:
= Display of the Channels = == Display of the Channels ==

https://mikrokopter.de/images/deu.gif Page in deutsch

https://mikrokopter.de/images/fra.gif Page en français

https://mikrokopter.de/images/ita.gif Pagina in italiano


Channels

https://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=70346&g2_serialNumber=1


The Transmitter will transmit to the Mikrocopter on the assigned 4 channels
needed by the Mikrocopter: GAS, GIER, NICK, ROLL

MotorSafetySwitch

In the past it happened that users switched off the MK during flight by moving the gas/yaw stick into the left corner. Especially in the vario-altitude control mode that could happen

Now this can be avoided via a seperate channel.

On/off is disabled if the value of this channel is below 35

{i} Tip: you can put this onto the channel of the altitude controller. So you can't switch off with enabled hight-control

Using the other channels

The other 4 Channels can be assigned to POTI 1,2,3 or 4
On each of the POTI a channel can be assigned to control various functions from a switch or potentiometer to control height, camera panning, tilt etc.

Display of the Channels

The display above shows the current value of the individual channels.