|
Größe: 798
Kommentar:
|
Größe: 7371
Kommentar:
|
| Gelöschter Text ist auf diese Art markiert. | Hinzugefügter Text ist auf diese Art markiert. |
| Zeile 1: | Zeile 1: |
| {{{#!wiki caution '''Info''' |
#acl AdminGroup:read,write,revert EditorsGroup:read,write,revert All: |
| Zeile 4: | Zeile 3: |
| Diese Seite befindet sich derzeit in der Überarbeitung. <<BR>> This page is currently under revision }}} |
############################################################################## |
| Zeile 9: | Zeile 5: |
| ||<class="MK_TableNoBorder">This page as an '''PDF-Document'''? Click on that Symbol and wait a little moment... ---> ||<class="MK_TableNoBorder"><<PDFIcon>>|| | ## Navigation oben ---- {{{#!html <div style="float: left; margin-right:50px;"> }}} '''__Quick selection__'''<<BR>> '''Open the description -> click Button''' <<BR>> [[en/MK-Parameter/Channels|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=139883&g2_serialNumber=2}}]] [[en/MK-Parameter/Configuration|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=139888&g2_serialNumber=2}}]] [[en/MK-Parameter/Stick|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=139630&g2_serialNumber=2}}]] [[en/MK-Parameter/Looping|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=139626&g2_serialNumber=2}}]] [[en/MK-Parameter/Altitude|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=139863&g2_serialNumber=2}}]] [[en/MK-Parameter/Camera|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=139873&g2_serialNumber=2}}]] [[en/MK-Parameter/Navi-Ctrl|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=139628&g2_serialNumber=2}}]] [[en/MK-Parameter/Navi-Ctrl2|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=139629&g2_serialNumber=2}}]] [[en/MK-Parameter/Output|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=139843&g2_serialNumber=2}}]] [[en/MK-Parameter/Misc|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=139903&g2_serialNumber=2}}]] [[en/MK-Parameter/Gyro|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=139621&g2_serialNumber=2}}]] [[en/MK-Parameter/User|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=139853&g2_serialNumber=2}}]] [[en/MK-Parameter/Coupling|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=139833&g2_serialNumber=2}}]] [[en/MK-Parameter/Mixer-SETUP|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=139627&g2_serialNumber=2}}]] [[en/MK-Parameter/EasySETUP|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=139620&g2_serialNumber=2}}]] {{{#!html </div> }}} ############################################################################## <<BR>><<BR>> ||<class="MK_TableNoBorder">This page as an '''PDF-Document'''? <<BR>>Click on that Symbol and wait a little moment... ---> ||<class="MK_TableNoBorder"><<PDFIcon>>|| <<BR>> ---- ############################################################################## ## Überschrift |
| Zeile 12: | Zeile 48: |
| ||<class="MK_Nav_Header" width= "100%">Configuration|| ||<class="MK_TBody":>'''[[en/MK-Parameter|Back to mainview]]'''|| |
||<class="MK_Nav_left": height= "60px">||<class="MK_Nav_Header">Configuration||<class="MK_Nav_right":>|| |
| Zeile 16: | Zeile 51: |
| Zeile 18: | Zeile 52: |
| Zeile 20: | Zeile 53: |
| * {{http://mikrokopter.de/images/fra.gif}} [[fr/MK-Parameter/Configuration|français]] |
|
| Zeile 24: | Zeile 55: |
| ############################################################################## | |
| Zeile 25: | Zeile 57: |
| ---- | ## Bild rechts |
| Zeile 27: | Zeile 59: |
| <<Include(include/KopterTool/Settings-Configuration, , from="^------$", to="^------$")>> | {{{#!html <div style="float: right; margin: 15px;"> }}} {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=139207&g2_serialNumber=3}} {{{#!html </div> }}} |
| Zeile 29: | Zeile 67: |
| ---- . KategorieTools |
############################################################################## ## Text neben Bild <<BR>> In a total of five sets of parameters different settings can be stored in the Kopter. These can be accessed through the sticks after turning on the Kopter and the initialization.<<BR>> <<BR>><<BR>><<BR>><<BR>><<BR>><<BR>><<BR>><<BR>><<BR>><<BR>> <<BR>><<BR>><<BR>><<BR>><<BR>><<BR>><<BR>><<BR>><<BR>><<BR>> <<BR>><<BR>><<BR>><<BR>><<BR>><<BR>><<BR>><<BR>><<BR>><<BR>> <<BR>> ############################################################################## ## Erklärungen * '''Name of configuration'''<<BR>> Each setting can be named under ''Name of configuration'' with a representative name. This is useful for example for different payloads, sporty flying or camera-flight etc. <<BR>> If a setting is completed or altered it must be saved under it's number in the !MikroKoper with the function '''WRITE''' <<BR>> The !MikroKopter acknowledged this with a appropriate number of short beeps. <<BR>><<BR>> To select the settings with the transmitter the proceed as follows: : <<BR>> '''Setting 1''' => Roll left + Nick middle '''plus''' Gas up + Gier left <<BR>> '''Setting 2''' => Roll left + Nick up '''plus''' Gas up + Gier left <<BR>> '''Setting 3''' => Roll middle + Nick up '''plus''' Gas up + Gier left <<BR>> '''Setting 4''' => Roll right + Nick up '''plus''' Gas up + Gier left <<BR>> '''Setting 5''' => Roll right + Nick middle '''plus''' Gas up + Gier left <<BR>><<BR>> * '''Altitude control''' <<BR>> Checked if the air pressure sensor on the !FlightCtrl should be used. * '''GPS''' <<BR>> In that case the GPS-System (!NaviCtrl + MKGPS) is activated . Therefore GPS-functions like holding position (PositionHold), flying back to the start-point (ComingHome) and the fly-around with waypoints are possible. * '''Compass''' <<BR>> Typically, this field is grayed out and active when GPS is selected.<<BR>> Only if there is no GPS-System on the copter and if you use e.g. a MK3Mag on your !FlightCtrl you can deaktivate this and activate only "Compass". The single using of a MK3Mag is normally not customary. * '''Orientation fixed''' <<BR>> If this function is activated, the !MikroKopter depends on the yaw and over again from the direction in which it has been at the start.<<BR>> Attention: If this function is enabled, the copter can not be completely turned! <<BR>> * '''Sensitive receiver signal validation''' <<BR>> The ''Sensitive receiver signal validation'' was built specifically for the 35/40 MHz systems. A receiving failure is detected properly. If you use a 2.4GHz Transmitter / Receiver you did not need this function.<<BR>> (see also [[en/MK-Parameter/Channels|''Channels'']]) * '''Axis-(de-)coupling''' <<BR>> Here you can enable or disable the axis coupling. The axle coupling prevents the !MikroKopter after a curve is flown to be loopsided.<<BR>> Function is active when the yaw angle will be corrected internally. This function should always be activated. * '''Rotationrate limiter''' <<BR>> Additional limitation of the rate of rotation. With this option the characteristic of the gyro is lifted at the ends.<<BR>> This prevents rapid maneuver, which is regulated at a certain rate of rotation. Applies only to pitch and roll. (Only interesting for beginners). * '''Heading Hold (Nick/Roll)''' <<BR>> In this mode and after a flight maneuver the !MikroKopter is __not__ automatically going back into a horizontal position when the stick is in neutral position. This setting, for example, are possible for most types of loops. <<BR>> '''This function is for experienced pilots! This one needs a lot of flying experience!'''<<BR>> -> ATTENTION: Who wants to fly HH the I-part must be increased to the proportion of the main controller (e.g. to 30)! More information about flying with Heading Hold you can read here: HeadingHold (information only in german) <<BR>><<BR>><<BR>><<BR>><<BR>><<BR>><<BR>><<BR>><<BR>><<BR>> |
Quick selection
Open the description -> click Button
This page as an PDF-Document? |
 |
Configuration |
In a total of five sets of parameters different settings can be stored in the Kopter. These can be accessed through the sticks after turning on the Kopter and the initialization.
Name of configuration
Each setting can be named under Name of configuration with a representative name. This is useful for example for different payloads, sporty flying or camera-flight etc.
If a setting is completed or altered it must be saved under it's number in the MikroKoper with the function WRITE
The MikroKopter acknowledged this with a appropriate number of short beeps.
To select the settings with the transmitter the proceed as follows: :
Setting 1 => Roll left + Nick middle plus Gas up + Gier left
Setting 2 => Roll left + Nick up plus Gas up + Gier left
Setting 3 => Roll middle + Nick up plus Gas up + Gier left
Setting 4 => Roll right + Nick up plus Gas up + Gier left
Setting 5 => Roll right + Nick middle plus Gas up + Gier left
Altitude control
Checked if the air pressure sensor on the FlightCtrl should be used.GPS
In that case the GPS-System (NaviCtrl + MKGPS) is activated . Therefore GPS-functions like holding position (PositionHold), flying back to the start-point (ComingHome) and the fly-around with waypoints are possible.Compass
Typically, this field is grayed out and active when GPS is selected.
Only if there is no GPS-System on the copter and if you use e.g. a MK3Mag on your FlightCtrl you can deaktivate this and activate only "Compass". The single using of a MK3Mag is normally not customary.Orientation fixed
If this function is activated, the MikroKopter depends on the yaw and over again from the direction in which it has been at the start.
Attention: If this function is enabled, the copter can not be completely turned!
Sensitive receiver signal validation
The Sensitive receiver signal validation was built specifically for the 35/40 MHz systems. A receiving failure is detected properly. If you use a 2.4GHz Transmitter / Receiver you did not need this function.
(see also ''Channels'')Axis-(de-)coupling
Here you can enable or disable the axis coupling. The axle coupling prevents the MikroKopter after a curve is flown to be loopsided.
Function is active when the yaw angle will be corrected internally. This function should always be activated.Rotationrate limiter
Additional limitation of the rate of rotation. With this option the characteristic of the gyro is lifted at the ends.
This prevents rapid maneuver, which is regulated at a certain rate of rotation. Applies only to pitch and roll. (Only interesting for beginners).Heading Hold (Nick/Roll)
In this mode and after a flight maneuver the MikroKopter is not automatically going back into a horizontal position when the stick is in neutral position. This setting, for example, are possible for most types of loops.
This function is for experienced pilots! This one needs a lot of flying experience!
-> ATTENTION: Who wants to fly HH the I-part must be increased to the proportion of the main controller (e.g. to 30)!More information about flying with Heading Hold you can read here: HeadingHold (information only in german)