Step 5 - First check in the KopterTool

en/Erstinbetriebnahme/Step4Wikiseite zurück

en/Erstinbetriebnahme/Help

Wikiseite vor en/Erstinbetriebnahme/Step6

Step 5 - First check in the !KopterTool

Requirements

  • Step4 has been read.

First check in the KopterTool

Depending on which Kopter is connected (Quadro, Hexa or Okto) the displays of the KopterTool are different in the virtual display.

Below of the virtual display is also a status indicator. Here you can determine quickly if everything is OK (green status indicator) or if there is an error (red status indicator).
Is a status indicator red another button appears next to it "Details..." . One "click" on the button tells you more about the possible error.
It should be your target to have all indicators on green.

The displays for a QuadroKopter should be in that way as shown in the examples under: View QuadroKopter.

If you have a HexaKopter or OktoKopter connected it should be in that way as shown in the examples under: View of HexaKopter or OktoKopter.

View QuadroKopter

The FlightCtrl has as a standard mixer the "Quadro" set up. If you have now a QuadroKopter connected the display in the KopterTool should be in that way:

Example View KopterTool V1.76b:

Example View KopterTool V1.76b:

Example View KopterTool V1.76b:

Only FlightCtrl mounted on the Kopter

FlightCtrl and NaviCtrl V2.0 mounted

FlightCtrl, NaviCtrl V1.1, MK3Mag mounted

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=95900&g2_serialNumber=2

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=95904&g2_serialNumber=2

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=95902&g2_serialNumber=2

This display shows: *All OK*

FlightCtrl V2.1 (HW:2.1)
Software Version 0.86d
Active Setting: 3
Set up Mixer: Quadro

Status display FlightCtrl: green
Status display BL-Ctrl: green
Status display NaviCtrl: not active (not connected)
Status display Compass: not active (not connected)

This display shows: *Almost all OK*

NaviCtrl V2.0 (HW:2.0)
Software Version 0.26f
Error:6 / "bad compass value"
(Error: Compass not calibrated)

Status display FlightCtrl: green
Status display BL-Ctrl: green
Status display NaviCtrl: green
Status display Compass: red

This display shows: *Almost all OK*

NaviCtrl V1.1 (HW:1.1)
Software Version 0.26f
Error:22 / "Magnet error"
(Error: Compass not calibrated)

Status display FlightCtrl: green
Status display BL-Ctrl: green
Status display NaviCtrl: red
Status display Compass: red



Only FlightCtrl on the QuadroKopter:
All Status displays are on green = ALL is OK.


FlightCtrl + GPS-System on the QuadroKopter:
Red Status display shows us that something is not OK.
Here now and depending on the used NaviCtrl a bad compass value or a Magnet error will be displayed.

Getting the information Magnet error you should click on the button Details....
If here is as an error a missing compass calibration indicated you must, as well as with a bad compass value, calibrate the compass.

Just only calibrate the compass, an error is not indicated.
Before the compass is calibrated, however, a few other settings are required.
How that works is written in a different Step further down the road.

<!> With each new NaviCtrl V2.0 (or MK3Mag) the compass is still not calibrated. For that reason an error message with a red status display is shown.





HELP

If a different error (i.e. I2C error) is shown in the virtual display please first read here: en/Erstinbetriebnahme/Help#Step5
(The Kopter can be disconnected from the power supply/Lipo for that time.)





Everything OK so far? Then it continues here: en/Erstinbetriebnahme/Step6



View HexaKopter or OktoKopter

If a HexaKopter or OktoKopter is connected the actual set up standard mixer "Quadro" shows you the first 4 BL-Ctrl's but not the other ones.
The display in the KopterTool looks in that way:

Example View KopterTool V1.76b:

Example View KopterTool V1.76b:

Example View KopterTool V1.76b:

Only FlightCtrl mounted on the Kopter

FlightCtrl and NaviCtrl V2.0 mounted

FlightCtrl, NaviCtrl V1.1, MK3Mag mounted

https://gallery3.mikrokopter.de/var/resizes/intern/MikroKopterTool/KopterTool/Details/FC2_1_Mixer%20Error.jpg?m=1410791333

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=95910&g2_serialNumber=2

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=95908&g2_serialNumber=2

This display shows: *Almost all OK*

FlightCtrl V2.1 (HW:2.1)
Software Version 0.86d
Active Setting: 3
Setup Mixer: Quadro

Status display FlightCtrl: red
Status display BL-Ctrl: green
Status display NaviCtrl + Compass: not active (connected)

One "click" on the Button "Details..." shows you
that the mixer needs a set up.
(After that, all status displays are green = ALL OK)


This display shows: *Almost all OK*

NaviCtrl V2.0 (HW:2.0)
Software Version 0.26f
Error:19 / "Mixer Error"

Status display BL-Ctrl + NaviCtrl: green
Status display FlightCtrl + Compass: red

One "click" on the Button "Details..." shows you
that the mixer needs a set up.
After the mixer is set up correctly, just only
the status display "Compass" is red.
Here you need to calibrate the compass
to get all indicators on "green".


This display shows: *Almost all OK*

NaviCtrl V1.1 (HW:1.1)
Software Version 0.26f
Error:22 / "Mixer error"

Status display FlightCtrl: red
Status display BL-Ctrl + NaviCtrl + Compass: green

One "click" on the Button "Details..." shows you
that the mixer need to be set up.
After the mixer is set up the
Status display "Compass" is on red.
Here you need to calibrate the compass
to get all status indicators on "green".



Only FlightCtrl on the Hexa- or OktoKopter:
For that reason that the default "Quadro"-Mixer just only displays the first 4 BL-Ctrl and not the remaining BL-Ctrl's of the Hexa- or OktoKopter,
a Mixer Error is shown. If the right mixer for the Hexa or Okto is choosen everything is OK again.

FlightCtrl + GPS-System on the Hexa- or OktoKopter:
Also here shows the default "Quadro"-Mixer just only the first 4 BL-Ctrl's and not the remaining BL-Ctrl's of the Hexa- or OktoKopter.
If the right mixer for the Hexa or Okto is choosen everything is OK again.
How that will be done is described in a later Step.

<!> With each new NaviCtrl V2.0 (or MK3Mag) the compass is still not calibrated. An error message in form of a red status indicator is displayed.
After the right set up of the mixer the nissing compass calibration will be shown.
How that will be done is described in a later Step.





HELP

If a different error (i.e. I2C error) is shown in the virtual display please first read here: en/Erstinbetriebnahme/Help#Step5
(The Kopter can be disconnected from the power supply/Lipo for that time.)





Everything OK? Then it continues here: en/Erstinbetriebnahme/Step6