Versions

Since Firmware FC 2.06e, the version numbers are listed:

In case that there are different versions of BL-Firmware installed, the KopterTool (since V2.06e) shows the lowest version in the List:

• we strongly recommend to update if the version Number is 1.00 or, 1.02 (red version number)!

• Instruction to update the BL V3 here: Update

Firmware

Here you can find the latest versions vor the BL-Ctrl V3:

http://mikrocontroller.com/files/BL_V3

Version V1.06b

since 19th June 2014

• Redundance operation: some small bugfixes in communication

• "ERR:Motor restart" at high current peaks the message "ERR:Motor Restart" could occure instead of "BL-Limitation"

• some motors lost commutation when driving at high currents

  • then comes the message "BL-Limitation" or "ERR:Motor Restart"

  • Timing 28° was improved for the case of commutation loss -> please try timing 28 if you have these effects

Version V1.04c

since 07th May 2014

Download: V1.04c

• better protection against high current peaks during operation
• Safer behavior while operation without propellers
• Integrated watchdog that restarts the BL controllers in case of a failure
• Various bug fixes

Version V1.02d

Since 17th March 2014

• Improved motor-start by a self-learning start phase
• internal speed limitation

• increased commutating speed (Max RPM is 200.000 devided by the number of magnets -> 16.666 RPM if you have 12magnets)

• Prepared for redundant FC-Operation

• we strongly recommend to update to version 1.04c or higher

Version V1.00f

Since 1st Jan. 2014

• First Version

• we strongly recommend to update to version 1.04c or higher