Protocol
The protocol is based on individual serial data frames that are organized as shown in the following table.
Start-Byte |
Address-Byte |
ID-Byte |
n Data-Bytes coded |
CRC-Byte1 |
CRC-Byte2 |
Stop-Byte |
'#' |
variable |
V,D etc |
"modified-base64" |
variable |
variable |
'\r' |
Commands
The Commands based on the dataframes above (named data-types in the picture above) are listed [:en/SerialCommands:here]
Slave Adresses
Since Navi 0.12h FC 0.71f Mag 0.19 there are constant SlaveAdresses:
Slave-Address |
Part |
1 |
FC |
2 |
NC |
3 |
MK3MAG |
Data Format
ToDo: describe data-format
Checksum
ToDo: describe checksum calculation
Links