Info
Diese Seite befindet sich derzeit in der Überarbeitung.
This page is currently under revision
This page as an PDF-Document? Click on that Symbol and wait a little moment... ---> |
|
The parameters of GPS wind correction, speed compensation, GPS max. Radius have no direct effect to the GPS-PID-controllers (P, I, D in the tab navigation Ctrl).
Enable GPS
GPS Wind correction
ACC Compensation
GPS maximal Radius
This value in meter defines a circular area around the start position. Only inside of this circular area you can set position targets (waypoints/POI).
If a waypoint-position is outside of this area the target will be set on a spot of the edge of the circle which is close to the nominal position.
The maximum radius (without a License) is about 250m. That's equal to an area of approx. 500m in a diameter around the start position.
The radius is stated as a percentage (%). So 245 is 100% and 1 is 1%. How much the percentage is in meters, you can see in the the virtual display at themain window of the KopterTool.
For this you have to "click" on the Button "->NaviCtrl" to switch to the NaviCtrl. Then you can choose the display window with the red arrows under the virtual display:
INFO
The height will be flown (as well as for the height requirements for the waypoints) only in Vario-Height control.
And only if the throttle stick is in neutral position.
Some of these sizes you can get while experimenting with the settings to a potentiometer and get the optimal values in a flight erfliegen.