Unterschiede zwischen den Revisionen 1 und 4 (über 3 Versionen hinweg)

Looping

Important: To get to this settings-tab, the Alt-key must be pressed when clicking on Settings in MK-tool.
MK-Parameter/Looping/looping.gif

Arrows: Loops in the corresponding direction. Looping will only be possible in the red-arrowed directions.
Gas Limit: This throttle-value (K=) will set through loop (as an upper limit).
Response threshold: Defines the roll/nick stick-value at which the loop is initiated.
Hysteresis: Stick-Hysteresis for Response Threshold. Usually always lower than Response Threshold. External article on Hysterisis.
- Important: Response Threshold - Hysteresis should always be between 20-40 , else wise the MK will bank to the current stick-input very quickly (especially true if setup for acrobatics and touchy controls), when the looping-function is completed (potentially requiring a large stick-input, that could initiate another loop).
TurnOver Nick: Defines how many degrees the MK should rotate during a loop in the backwards/forwards direction. 100 means 360 degrees. If the MK rotates too far, this value must be decreased. 1 = 3,6 degrees.
TurnOver Roll: same as TurnOver Nick, but for the roll-axis.

Note: The looping-functionality is only used when flying using the accelerometers (no tick in "Heading Hold").

-  ⇤ ← Revision 1 vom 13.07.2011 01:21 → 
  Größe: 1717
  Autor: wizprod
  Kommentar:
+   ← Revision 4 vom 13.07.2011 01:29 → ⇥
  Größe: 1798
  Autor: wizprod
  Kommentar:
-Gelöschter Text ist auf diese Art markiert.
+Hinzugefügter Text ist auf diese Art markiert.
 Zeile 1:
-||<tablewidth="347px" tablestyle="TEXT-ALIGN: center"bgcolor="#ffffa0"> {{http://mikrokopter.de/images/deu.gif}} Page in [[MK-Parameter/Loopings|deutsch]] ||<bgcolor="#ffffa0"> {{http://mikrokopter.de/images/fra.gif}} Page en  [[fr/MK-Parameter/Looping|français]] ||
+||<tablewidth="347px" tablestyle="TEXT-ALIGN: center"bgcolor="#ffffa0"> {{http://mikrokopter.de/images/deu.gif}} Page in [[MK-Parameter/Looping|deutsch]] ||<bgcolor="#ffffa0"> {{http://mikrokopter.de/images/fra.gif}} Page en  [[fr/MK-Parameter/Looping|français]] ||
 Zeile 3:
+<<Navigation(siblings)>>
 Zeile 15:
-  * '''''Important:''''' Response Threshold - Hysteresis should always be between 20-40 , else wise the MK will bank to the current stick-input very quickly (especially true if setup for acrobatics and touchy controls), when the loopingfunction is completed (potentially requiring a large stick-input, that could initiate another loop).
 * '''!TurnOver Nick: '''Defines how many degrees the MK should rotate during a loop. 100 means 360 degrees. If the MK rotates too far, this value must be decreased. 1 = 3,6 degrees.
+  * '''''Important:''''' Response Threshold - Hysteresis should always be between 20-40 , else wise the MK will bank to the current stick-input very quickly (especially true if setup for acrobatics and touchy controls), when the looping-function is completed (potentially requiring a large stick-input, that could initiate another loop).
 * '''!TurnOver Nick: '''Defines how many degrees the MK should rotate during a loop in the backwards/forwards direction. 100 means 360 degrees. If the MK rotates too far, this value must be decreased. 1 = 3,6 degrees.
 Zeile 20:
-'''Note:''' The looping-functionality is only used when flying using the accelerometers (no tick in "Heading Hold").
+'''Note:''' The looping-functionality is only used when flying using the accelerometers (no tick in "[[../Configuration|Heading Hold]]").