---

With the tab CamCtrl you can set the functions of the optionally available camera controller "!CAMCtrl".

With this controller you can controll the functions Zoom, REC ON/OFF and Trigger of an Sony Foto-/Video camera.

INFO:
You can use this settings only if an CamCtrl I2C is connected.
(More informations about the CamCtrl you can find here: CamCtrl)

Overview CamCtrl

Settings

Mode Channel

Here you can set the channel you will use for the function "REC ON/OFF und Trigger".

The same channel you set here should be also set on your transmitter on a 3way switch.
The positions of the switch are:

• switch position OFF

  • function OFF

• switch position MITTE

  • function Trigger (The camera is triggering 1x)

• switch position VOLL

  • function REC ON

Info:
If your transmitter also include a push button and if you use a second channel for this,
you can also trigger the camera with the push button.
Important: This second channel must be set under Out 1 Timing !!

• Function:
  If the 3way switch is centered (camera is triggering once) you can trigger the camera
  again and again via the push button.

---

Zoom Channel

Here you can set the channel you will use for the function "Zoom".

The same channel you set here should be also set on your transmitter on a potentiometer.
The positions of the potentiometer are:

• potentiometer centered

  • no Zoom

• potentiometer from center to the left

  • camera zoom IN

• potentiometer from center to the right

  • camera zoom OUT

Info:
A small moving from the center to the left/right will zoom slow, a bigger move
will zoom faster.

To cut the zooming center the potentiometer.

Connect CamCtrl

Connection CamCtrl - FlightCtrl V3.0

• 

Connection CanCtrl - NaviCtrl V2.1

•