Inhaltsverzeichnis
Intro
My first copter was the protokopter, which has been in the air for about a year. Time to build a new copter, and time to try something other than a simple alu-square-cross. So, the G2 will feature completely non-revolutionizing rounded arms.. Initially, I'll just build the frame, and use the electronics from the "G1" copter. Hopefully the copter will be upgraded later on...
About
Name: Fishy / Jon Langseth
Email: jon.langseth@lilug.no My (primarily norwegian) website and blog is located at defcon.no
The copter itself is built around an aluminium center, with glass-fibre round arms. I havent quite decided on the length of the arms yet.
Technical data
Dimensions: Unknown...
Battery: ProTek R/C 3S Li-Poly 20C 4000mAh
Transmitter: Graupner MC12
Reciever: DLS 4Top MK
Props: EPP1045
Takeoff weight: Unknown (still building)
Motors
Arrowind 2210-30
- RPM/V 1200/1500
Max. efficiency current 8 - 10.5 A (>75%)
- No load current / 10 V 0,5 A
- Current capacity 18 A/60 s
- Dimensions 22x10 mm
- Shaft diameter 3 mm
- Weight 45 g
- Recommended model weight 220 - 350 g
- Recommended prop without gearbox 6"-8"
Electronics
FC 1.1 preassembled
BL_Ctrl 1.1 preassembled
Frame
More to come...