#acl AdminGroup:read,write,revert Brunweil:read,write,revert All:read

{{{#!wiki MK_Nav
||||||<class="MK_Nav_Header">Step 3 - Connect the Kopter with the PC||
||<class="MK_Nav_left">[[fr/Erstinbetriebnahme/Step2|{{attachment:symbols/Pfeil_links.png}}]]Wikiseite zurück||<class="MK_Nav_middle">[[fr/Erstinbetriebnahme/Help|{{attachment:symbols/Help.png}}]]||<class="MK_Nav_right">Wikiseite vor [[fr/Erstinbetriebnahme/Step4|{{attachment:symbols/Pfeil_rechts.png}}]]||
}}}

{{{#!wiki MK_select1

 * {{http://mikrokopter.de/images/deu.gif}} [[Erstinbetriebnahme/Step3|deutsch]]
 * {{http://mikrokopter.de/images/eng.gif}} [[en/Erstinbetriebnahme/Step3|english]]
}}}


##include_step_begin

= Step 3 - Connect the Kopter with the PC =
== Requirement ==
 * '''Step2''' has been read.

== Connect Kopter with PC ==
Is the !KopterTool and the MK-USB installed and set up there is now a good time to connect the Kopter over the MK-USB to your PC/Laptop. <<BR>><<BR>>

Here now you need to connect right in polarity the ribbon cable to the MK-USB and the !FlightCtrl (or another module). <<BR>><<BR>>

<!> If you connect the ribbon cable in a wrong way you may be damage the boards.<<BR>><<BR>>

'''Two things you should know:''' <<BR>>
 * On '''ALL''' boards is on the TOP-side and on the right next to the pin-header a '''"1"''' printed.
 * The ribbon cable has on one side a '''red mark'''.

The '''red mark''' should point to the printed '''"1"'''.<<BR>><<BR>>

{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=77838&g2_serialNumber=2}}<<BR>><<BR>><<BR>><<BR>>


Wether or not if you have connected only the !FlightCtrl or already the GPS-System, the connection to the Kopter looks in that way: <<BR>><<BR>>

||<class="MK_THeader">'''Example photo:''' Connection to '''!FlightCtrl'''||<class="MK_THeader">'''Example photo:''' Connection to '''!NaviCtrl'''||
||<(>[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=89951&g2_serialNumber=2|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=99967&g2_serialNumber=2}}]]||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=89956&g2_serialNumber=2|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=99968&g2_serialNumber=2}}]]||
<<BR>><<BR>><<BR>>

'''The jumper on the MK-USB has to be open.'''


##include_step_ende


<<BR>><<BR>><<BR>>
Everything OK? Then it continues here:
[[fr/Erstinbetriebnahme/Step4|{{attachment:symbols/Pfeil_rechts.png}}]]