|
Größe: 112
Kommentar:
|
Größe: 1304
Kommentar:
|
| Gelöschter Text ist auf diese Art markiert. | Hinzugefügter Text ist auf diese Art markiert. |
| Zeile 3: | Zeile 3: |
| Here you find a small WikiCourse/BasicIntroduction /!\ Here is our english discussion board: http://mikrocontroller.cco-ev.de/forum/forum-17.html = Checklist: = You need at least these components to build a MikroKopter: * FlightCtrl board * 4x BrushlessCtrl boards (speed controllers) * SerCon board (for programming and debugging) * 4x Brushless Motor (eg: Robbe ["ROXXY2824-34"]) * [:RC-Empf%C3%A4nger:Receiver] (35Mhz) that offers the "multi" signal (muxed signal holding all channels) * 6-channel Sender (35Mhz)+battery+charger (most used: Graupner MC12, MX12 which have extra switches) * cristal-pair for both sender+receiver * Frame material (most used: [:MK-40-Rahmen:10mm square Alu profile with 40 cm Motor-distance] and 2x CenterPlate) * 4x Propeller EPP1045: 2x clockwise-rotating, 2x counterclockwise-rotating (if possible order 10 pairs or more) (order at Lipoly.de or CNC-Modellsport.de). Alternative: X-Ufo (8") props for smaller MK's * Prop-holders or Propsaver (fit for your Motor). NOTE: EPP1045 requires a 3mm shaft * LiPo-Battery (if possible at least 2) * LiPo-charger + balancer * other small parts like fasteners, cables, connectors |
If you need help regarding this wiki: HelpContents
Here you find a small WikiCourse/BasicIntroduction
![/!\](/moin_static199/mk-style3/img/alert.png "/!\"){kind=small}
Here is our english discussion board: http://mikrocontroller.cco-ev.de/forum/forum-17.html
Checklist:
You need at least these components to build a MikroKopter:
FlightCtrl board
4x BrushlessCtrl boards (speed controllers)
SerCon board (for programming and debugging)
- 4x Brushless Motor (eg: Robbe ["ROXXY2824-34"])
- [:RC-Empf%C3%A4nger:Receiver] (35Mhz) that offers the "multi" signal (muxed signal holding all channels)
- 6-channel Sender (35Mhz)+battery+charger (most used: Graupner MC12, MX12 which have extra switches)
- cristal-pair for both sender+receiver
Frame material (most used: [:MK-40-Rahmen:10mm square Alu profile with 40 cm Motor-distance] and 2x CenterPlate)
- 4x Propeller EPP1045: 2x clockwise-rotating, 2x counterclockwise-rotating (if possible order 10 pairs or more) (order at Lipoly.de or CNC-Modellsport.de). Alternative: X-Ufo (8") props for smaller MK's
- Prop-holders or Propsaver (fit for your Motor). NOTE: EPP1045 requires a 3mm shaft
LiPo-Battery (if possible at least 2)
LiPo-charger + balancer
- other small parts like fasteners, cables, connectors