Unterschiede zwischen den Revisionen 21 und 27 (über 6 Versionen hinweg)
Revision 21 vom 26.09.2007 11:06
Größe: 1297
Autor: harrie
Kommentar:
Revision 27 vom 28.04.2010 22:56
Größe: 1417
Autor: anonym
Kommentar: converted to 1.6 markup
Gelöschter Text ist auf diese Art markiert. Hinzugefügter Text ist auf diese Art markiert.
Zeile 7: Zeile 7:
<<BR>>
 * English Mikrokopter home page in the WiKi: [[en/MikroKopter]]
<<BR>>
Zeile 10: Zeile 13:
<<BR>>
Zeile 13: Zeile 17:
 * 4x Brushless Motor (eg: Robbe [http://www.mikrokopter.de/ucwiki/ROXXY2824-34 ROXXY2824-34])
 * Receiver (35Mhz) that offers the "multi" signal (muxed signal holding all channels)
 * 4x Brushless Motor (eg: Robbe [[ROXXY2824-34]])
 * [[RC-Empfänger|Receiver]] (35Mhz) that offers the "multi" signal (muxed signal holding all channels)
Zeile 17: Zeile 21:
 * Frame material (most used: [http://www.mikrokopter.de/ucwiki/MK-40-Rahmen 10mm square Alu profile with 40 cm Motor-distance] and 2x CenterPlate)
 * Propeller EPP1045 (if possible 10 pairs or more) (order at Lipoly.de or CNC-Modellsport.de). Alternative: X-Ufo (8") props for smaller MK's
 * Frame material (most used: [[MK-40-Rahmen|10mm square Alu profile with 40 cm Motor-distance]] and 2x CenterPlate)
 * 4x Propeller EPP1045: 2x clockwise-rotating, 2x counterclockwise-rotating (if possible order 10 pairs or more)

(order at Lipoly.de or CNC-Modellsport.de). Alternative: X-Ufo (8") props for smaller MK's
Zeile 23: Zeile 29:

<<BR>>
Zeile 24: Zeile 32:
[[FullSearch(KategorieEnglish)]] <<FullSearch(KategorieEnglish)>>

<<BR>>

If you need help regarding this wiki: HelpContents

Here you find a small WikiCourse/BasicIntroduction

/!\ Here is our english discussion board: http://mikrocontroller.cco-ev.de/forum/forum-17.html



Checklist:

You need at least these components to build a MikroKopter:


  • FlightCtrl board

  • 4x BrushlessCtrl boards (speed controllers)

  • SerCon board (for programming and debugging)

  • 4x Brushless Motor (eg: Robbe ROXXY2824-34)

  • Receiver (35Mhz) that offers the "multi" signal (muxed signal holding all channels)

  • 6-channel Sender (35Mhz)+battery+charger (most used: Graupner MC12, MX12 which have extra switches)
  • cristal-pair for both sender+receiver
  • Frame material (most used: 10mm square Alu profile with 40 cm Motor-distance and 2x CenterPlate)

  • 4x Propeller EPP1045: 2x clockwise-rotating, 2x counterclockwise-rotating (if possible order 10 pairs or more)

(order at Lipoly.de or CNC-Modellsport.de). Alternative: X-Ufo (8") props for smaller MK's

  • Prop-holders or Propsaver (fit for your Motor). NOTE: EPP1045 requires a 3mm shaft
  • LiPo-Battery (if possible at least 2)

  • LiPo-charger + balancer

  • other small parts like fasteners, cables, connectors


English wiki pages