Größe: 2023
Kommentar:
|
Größe: 3408
Kommentar:
|
Gelöschter Text ist auf diese Art markiert. | Hinzugefügter Text ist auf diese Art markiert. |
Zeile 2: | Zeile 2: |
You'll need two XBee modems. They come in 3 different antenna flavors. | |
Zeile 4: | Zeile 3: |
* XBee Pro 900 RPSMA - This is the one most folks will use. | = Introduction = The XBee is a wireless modem that can be used to connect MK Tools running on a laptop to the Flight or Navi Controller on the Mikrokopter. This can be useful for data logging sensor data, making real-time poti adjustments, and for conducting waypoint navigation. [[BR]] = Materials = You'll need two XBee modems. They come in 3 different antenna flavors. Below are listed some modules which operate in the 900Mhz range but there are other frequencies available including 2.4Ghz. * XBee Pro 900 RPSMA |
Zeile 13: | Zeile 20: |
Zeile 18: | Zeile 23: |
You need two XBee adapters. One needs to the the USB version, because you just plug that into your computer, and fire up MK-Tool. | [[BR]] |
Zeile 20: | Zeile 25: |
You can also use the USB version for the MK end, though it's more expensive, and slightly heavier than the "regulated" version which lacks the USB and FTDI stuff. You might have to jumper across a diode on the board as well, since it doesn't play nice with the diode in place. | You also need two XBee adapters. One needs to the the USB version, because you just plug that into your computer, and fire up MK-Tool. |
Zeile 22: | Zeile 27: |
If you're only going to buy two adapters, I'd recommend getting two of the USB versions, since you can use them to test the XBee modems on your computer. If you want more than 2 adapters, then you could get the cheaper ones. | You can also use the USB version for the MK end, though it's more expensive, and slightly heavier than the "regulated" version which lacks the USB and FTDI stuff. You might have to jumper across a diode on the board as well, since it doesn't play nice with the diode in place. If you're only going to buy two adapters, I'd recommend getting two of the USB versions, since you can use them to test the XBee modems on your computer. If you want more than 2 adapters, then you could get the cheaper ones. [[BR]] |
Zeile 28: | Zeile 37: |
http://www.sparkfun.com/commerce/product_info.php?products_id=9132 | http://www.sparkfun.com/commerce/product_info.php?products_id=9132[http://www.sparkfun.com/commerce/product_info.php?products_id=9132 |
Zeile 30: | Zeile 39: |
Zeile 31: | Zeile 41: |
The connection to the MK : | ==== Here is another alternate regulated adapter for inside the MK ==== http://www.droids.it/990_001.html |
Zeile 33: | Zeile 44: |
* Where to buy http://www.droids.it/distributors.html http://www.droids.it/distributors.htm |
|
Zeile 34: | Zeile 47: |
MK FC or Navi-board.....- XBee | [[BR]] = Installation = Each XBee modem plugs directly onto the XBee adapter. The Xbee adapter will be used on one end to connect to the computer via USB. On the Mikrokopter side, several wires need to be soldered onto the Xbee adapter so the adapter can be connected to the Flight or Navi controller. Using a 10-pin ribbon cable like the ones included with the Mikrokopter boards will simplify the installation a great deal. If you don't have spare ribbon cable, you can add one of these to your order: |
Zeile 36: | Zeile 51: |
Pin 1..........................- Pin 2 (DOUT) | http://www.sparkfun.com/commerce/product_info.php?products_id=8535 |
Zeile 38: | Zeile 53: |
Pin 2..........................- 5V connection on XBee USB adapter board | [[BR]] The connection to the MK : |
Zeile 40: | Zeile 55: |
Pin 7..........................- Pin 10 (GND) | '''MK FC or Navi-board'''.....- ''XBee'' |
Zeile 42: | Zeile 57: |
Pin 9..........................- Pin 3 (DIN) | '''Pin 1'''..........................- ''Pin 2 (DOUT)'' |
Zeile 44: | Zeile 59: |
'''Pin 2'''..........................- ''5V connection on XBee USB adapter board'' '''Pin 7'''..........................- ''Pin 10 (GND)'' '''Pin 9'''..........................- ''Pin 3 (DIN)'' |
|
Zeile 47: | Zeile 67: |
[[BR]] attachment:xbeeboard.jpg == Configuration of the Xbee modules == [[BR]] |
|
Zeile 49: | Zeile 76: |
If you don't have spare ribbon cable, you can add one of these to your order: http://www.sparkfun.com/commerce/product_info.php?products_id=8535 Use the XCTU program to do any configuration you need, as well as testing the XBees. |
[[BR]] Use the XCTU program to do any configuration you need, as well as testing the XBees. |
Zeile 57: | Zeile 80: |
= Content Credit = Rusty (13brv3) |
|
Zeile 58: | Zeile 83: |
/!\ ToDo: | /!\ ToDo: ---- . KategorieEnglish ---- . KategorieEnglish ---- . KategorieEnglish |
Introduction
The XBee is a wireless modem that can be used to connect MK Tools running on a laptop to the Flight or Navi Controller on the Mikrokopter. This can be useful for data logging sensor data, making real-time poti adjustments, and for conducting waypoint navigation.
Materials
You'll need two XBee modems. They come in 3 different antenna flavors. Below are listed some modules which operate in the 900Mhz range but there are other frequencies available including 2.4Ghz.
- XBee Pro 900 RPSMA
http://www.sparkfun.com/commerce/product_info.php?products_id=9099
- XBee Pro 900 wire
http://www.sparkfun.com/commerce/product_info.php?products_id=9097
- XBee Pro 900 U.FL
http://www.sparkfun.com/commerce/product_info.php?products_id=9098
- U.FL to SMA adapter
http://www.sparkfun.com/commerce/product_info.php?products_id=9145
You also need two XBee adapters. One needs to the the USB version, because you just plug that into your computer, and fire up MK-Tool.
You can also use the USB version for the MK end, though it's more expensive, and slightly heavier than the "regulated" version which lacks the USB and FTDI stuff. You might have to jumper across a diode on the board as well, since it doesn't play nice with the diode in place.
If you're only going to buy two adapters, I'd recommend getting two of the USB versions, since you can use them to test the XBee modems on your computer. If you want more than 2 adapters, then you could get the cheaper ones.
- XBee USB Adapter
http://www.sparkfun.com/commerce/product_info.php?products_id=8687
- XBee "Regulated" Adapter
Here is another alternate regulated adapter for inside the MK
http://www.droids.it/990_001.html
- Where to buy
http://www.droids.it/distributors.html http://www.droids.it/distributors.htm
Installation
Each XBee modem plugs directly onto the XBee adapter. The Xbee adapter will be used on one end to connect to the computer via USB. On the Mikrokopter side, several wires need to be soldered onto the Xbee adapter so the adapter can be connected to the Flight or Navi controller. Using a 10-pin ribbon cable like the ones included with the Mikrokopter boards will simplify the installation a great deal. If you don't have spare ribbon cable, you can add one of these to your order:
http://www.sparkfun.com/commerce/product_info.php?products_id=8535
BR The connection to the MK :
MK FC or Navi-board.....- XBee
Pin 1..........................- Pin 2 (DOUT)
Pin 2..........................- 5V connection on XBee USB adapter board
Pin 7..........................- Pin 10 (GND)
Pin 9..........................- Pin 3 (DIN)
attachment:xbee.jpg
attachment:xbeeboard.jpg
Configuration of the Xbee modules
Configure XBee for 57600 baud.
BR Use the XCTU program to do any configuration you need, as well as testing the XBees.
http://www.digi.com/support/productdetl.jsp?pid=3352&osvid=57&s=316&tp=5
Content Credit
Rusty (13brv3)
ToDo: