##master-page:2_NachbautenTemplate #format wiki <> = Intro = My first copter was the [[protokopter]], which has been in the air for about a year. Time to build a new copter, and time to try something other than a simple alu-square-cross. So, the G2 will feature completely non-revolutionizing rounded arms.. Initially, I'll just build the frame, and use the electronics from the "G1" copter. Hopefully the copter will be upgraded later on... = About = Name: Fishy / Jon Langseth <
> Email: jon.langseth@lilug.no My (primarily norwegian) website and blog is located at [[http://defcon.no/|defcon.no]] The copter itself is built around an aluminium center, with glass-fibre round arms. I havent quite decided on the length of the arms yet. = Technical data = Dimensions: Unknown... Battery: ProTek R/C 3S Li-Poly 20C 4000mAh Transmitter: Graupner MC12 Reciever: DLS 4Top MK Props: EPP1045 Takeoff weight: Unknown (still building) == Motors == Arrowind 2210-30 * RPM/V 1200/1500 * Max. efficiency current 8 - 10.5 A (>75%) * No load current / 10 V 0,5 A * Current capacity 18 A/60 s * Dimensions 22x10 mm * Shaft diameter 3 mm * Weight 45 g * Recommended model weight 220 - 350 g * Recommended prop without gearbox 6"-8" == Electronics == FC 1.1 preassembled BL_Ctrl 1.1 preassembled = Frame = More to come... ---- . KategorieNachbauten ---- KategorieNachbauten