{{{#!wiki MK_Nav ||Trainer Mode|| }}} {{{#!wiki MK_select1 * {{http://mikrokopter.de/images/deu.gif}} [[LehrerSchüler|deutsch]] * {{http://mikrokopter.de/images/fra.gif}} [[fr/TrainerMode|français]] }}} <
><
> <> = TrainerMode with MX-20 HoTT and MX-16 = Mostly every transmitter can be used as a Trainer mode-transmitter. Both transmitter will be connected over a Trainer mode-cable. <
> This can be e.g. a one-to-one mono or stereo cable (2x Cinch-Plug 3,5mm).<
> So different functions can be transferred to the pupil-transmitter. <
> Normally the first four channels are transferred to control the flight models. All other channels with it's function can be transferred too. <
> This can be also e.g. the control of a camera and the camera-mount.<
><
> In the following example two channels should be passed to the pupil-transmitter. The first channel to control the Nick-movement of the camera mount, the second channel to trigger the camera.<
> Both transmitter will be connected over a Trainer mode-cable. <
> <
> In the following example a '''MX-20 HoTT with 12 channels is used as a trainer-transmitter''' and a '''MX-16s with 8 channels as a pupil-transmitter'''.<
> The pupil-transmitter have only 8 channels. So we can only send the first 8 channels of the trainer-transmitter.<
> If a 12-channel transmitter is used as a pupil-transmitter all 12 channels can be transferred from the teacher-transmitter.<
><
> Here now an '''Example Listing''' of the channel allocation at the trainer-transmitter MX-20 HoTT to control the MikroKopter: <
> * '''Channel 1:''' Throttle * '''Channel 2:''' Roll * '''Channel 3:''' Nick * '''Channel 4:''' Yaw * '''Channel 5:''' Altitude regulator * '''Channel 6:''' GPS * '''Channel 7:''' !CareFree * '''Channel 8:''' Nick camera mount (should be passed to the pupil-transmitter) * '''Channel 9:''' Roll camera mount * '''Channel 10:''' Camera trigger (should be passed to the pupil-transmitter) * '''Channel 11:''' Free * '''Channel 12:''' Free The channel '''8''' to control the nick movement of the camera mount can be passed directly. <
> But not channel '''10''' to trigger the camera with a shuttercable. <
> So the trigger function need to be set up on a different channel. <
><
> In example: To have a channel free the altitude regulator is placed on the same channel of the GPS.<
> This has an advantage, if the 3-way switch of the GPS is switched to ''!PositionHold'' or ''!ComingHome'', the height control is also automatically enabled.<
> (The altitude regulator can be also set up on an other free channel.)<
> {i} Those settings can be stored in other setting-memories (e.g. in Setting 5). Now the free channel '''5''' can be used for the trigger: * '''Channel 1:''' Throttle * '''Channel 2:''' Roll * '''Channel 3:''' Nick * '''Channel 4:''' Yaw * '''Channel 5:''' '''Camera trigger''' * '''Channel 6:''' GPS '''+ Altitude regulator''' * '''Channel 7:''' !CareFree * '''Channel 8:''' Nick camera mount * '''Channel 9:''' Roll camera mount * '''Channel 10:''' '''Free''' * '''Channel 11:''' Free * '''Channel 12:''' Free In that way the conditions for the transfer of both functions to the pupil-transmitter are fulfilled.<
> {i} The channel allocation has to be done over the KopterTool. About the settings you can read here: [[en/MK-Parameter|Channel setting]] == Settings at teacher's transmitter MX-20 HoTT == On the [[en/HoTT|MX-20 HoTT]] now channel '''8''' to control the camera mount and channel '''5''' for the trigger must be released to the pupil-transmitter. <
> In addition an unused switch has to be set on the transmitter to enable/disable it's function of the Trainer mode. <
><
> Here you need to proceed as described in the instructions: <
> - Press "SET" to enter the menu. <
> - Down to the menu point "Teacher / pupil" ... <
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=93995&g2_serialNumber=1}} - and open with SET.<
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=93997&g2_serialNumber=2}} Now here you can release channel 5 + 8 for the pupil-transmitter. In addition left below you select the desired switch for switching to "Trainer mode". <
><
> DONE == Settings at pupil-transmitter MX-16s == Now the pupil-transmitter must be adjusted. At this transmitter the throttle-stick shall be used to move the camera mount in Nick-direction.<
> To trigger the camera the button SW4/PB8 shall be used. <
><
> The easiest way is to get a new model memory to use those settings. <
><
> Here you need to proceed as discribed in the instructions: - With a "click" on '''Enter''' you open the menu.<
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=93999&g2_serialNumber=1}} - With '''Enter''' open the model memory ...<
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=94001&g2_serialNumber=1}} - ... and select a free memory. <
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=94003&g2_serialNumber=1}} - Save as '''Fixed-wing model''' . <
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=94005&g2_serialNumber=1}} - The new created memory is directly active. <
><
> To use the throttle stick to control the camera mount you need to change one setting. <
> - Again with a "click" on '''Enter''' open the menu and change to '''base sett.'''.<
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=94007&g2_serialNumber=1}} - In the basic settings you can give the space memory a name (e.g. Camera ).<
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=94009&g2_serialNumber=1}} - After that down to '''Receiver Output'''... <
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=94011&g2_serialNumber=1}} - ... and place the throttle-stick on channel 8. Now you control channel 8 with the throttle-stick.<
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=94013&g2_serialNumber=1}} <
><
> Finally you place the button '''SW4/PB8''' to channel 5. In the '''Encoder Settings ''' it can be done.<
> (Press and hold button otherwise the button will work as a switch (SW4) ). <
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=94015&g2_serialNumber=1}} == Checking the functions == After both transmitter are set up you can/shall check the functions in the KopterTool.<
><
> How to use both transmitter: <
> First switch '''ON''' the trainer-ransmitter. Plug the !TrainerMode cable into the '''DSC-Socket''' at the trainer-transmitter.<
> The other end of the cable you connect to the DSC-Socket at the pupil-transmitter.<
> {i} The pupil-transmitter switches ON automatically.<
><
> As soon as at the trainer-transmitter the switch for the !TrainerMode is been switched, the two channels out of the example are transferred to the pupil-transmitter.<
><
> Is the Kopter hooked up to the KopterTool you can check on the function in the settings of the !KopterTool under "Channels" .<
> Is now the throttle-stick been moved at the pupil-transmitter the display at channel '''8''' should move. If you push the button, the channel '''5''' should show reaction.<
> If you switch the !TrainerMode button back both functions (channels) should be back to trainer-transmitter.<
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=92108&g2_serialNumber=1}} ---- . KategorieAnleitung