Größe: 3159
Kommentar:
|
← Revision 11 vom 18.12.2014 13:12 ⇥
Größe: 3130
Kommentar:
|
Gelöschter Text ist auf diese Art markiert. | Hinzugefügter Text ist auf diese Art markiert. |
Zeile 1: | Zeile 1: |
||<tablewidth="200px" tablestyle="TEXT-ALIGN: center"bgcolor="#ffffa0"> http://mikrocontroller.cco-ev.de/images/deu.gif Seite in [:SerCon:deutsch] || [[TableOfContents([maxdepth])]] |
||<tablewidth="200px" tablestyle="TEXT-ALIGN: center"bgcolor="#ffffa0"> {{http://mc.mikrocontroller.com/images/deu.gif}} Seite in [[SerCon|deutsch]] || <<TableOfContents>> |
Zeile 5: | Zeile 5: |
[[ImageLink(http://mikrocontroller.cco-ev.de/images/kopter/Sercon_kl.jpg,http://mikrocontroller.cco-ev.de/images/kopter/Sercon.jpg)]] | [[http://mc.mikrocontroller.com/images/kopter/Sercon.jpg|{{http://mc.mikrocontroller.com/images/kopter/Sercon_kl.jpg}}]] |
Zeile 18: | Zeile 18: |
With the SerCon you can program all PCB's from our Homepage ( also the PCB's from mikrocontroller.com ) [[BR]][[BR]] The RS232/TTL converter is needed for the setup, parameterizing and debugging with the [:en/MikroKopter-Tool:MikroKopter-Tool]. If you want you can also construct the circuit on a prototype PCB... | With the SerCon you can program all PCB's from our Homepage ( also the PCB's from mikrocontroller.com ) <<BR>><<BR>> The RS232/TTL converter is needed for the setup, parameterizing and debugging with the [[en/MikroKopter-Tool|MikroKopter-Tool]]. If you want you can also construct the circuit on a prototype PCB... |
Zeile 25: | Zeile 25: |
In the past there have been difficulties with [:AvrDude:AVRDude]. | In the past there have been difficulties with [[AVRDude]]. |
Zeile 29: | Zeile 29: |
. Download: http://mikrocontroller.cco-ev.de/files/PonyProg2000_26g.zip | . Download: http://mc.mikrocontroller.com/files/PonyProg2000_26g.zip |
Zeile 32: | Zeile 32: |
[[BR]] | <<BR>> |
Zeile 38: | Zeile 38: |
http://mikrocontroller.cco-ev.de/images/kopter/pony_ser.gif | {{http://mc.mikrocontroller.com/images/kopter/pony_ser.gif}} |
Zeile 40: | Zeile 40: |
[[BR]] You must select the following '''Fuses''': | <<BR>> You must select the following '''Fuses''': |
Zeile 42: | Zeile 42: |
http://mikrocontroller.cco-ev.de/images/kopter/pony644.gif | {{http://mc.mikrocontroller.com/images/kopter/pony644.gif}} |
Zeile 46: | Zeile 46: |
[[BR]] /!\ ''Attention:'' If you use the Flight-Control Software with '''Bootloader''', you have to set the following Fusebits to be able to use the Bootloader afterwards: | <<BR>> /!\ ''Attention:'' If you use the Flight-Control Software with '''Bootloader''', you have to set the following Fusebits to be able to use the Bootloader afterwards: |
Zeile 48: | Zeile 48: |
http://mikrocontroller.cco-ev.de/images/kopter/Atemega644Fusebits.png | {{http://mc.mikrocontroller.com/images/kopter/Atemega644Fusebits.png}} |
Zeile 50: | Zeile 50: |
[[BR]] | <<BR>> |
Zeile 61: | Zeile 61: |
If after setting inaccurate fuse bits ( or a failed programming with avrdude ) there is no longer access to the processor, you may be able to resurrect it with an external oscillator. See the wiki article ["AVRWiederbelebung"]. | If after setting inaccurate fuse bits ( or a failed programming with avrdude ) there is no longer access to the processor, you may be able to resurrect it with an external oscillator. See the wiki article [[AVRWiederbelebung]]. |
Zeile 63: | Zeile 63: |
[[BR]] | <<BR>> |
|
Inhaltsverzeichnis
Serieller Konverter (SerCon) ( Serial Converter )
The Serial Converter has two functions:
SI-PROG: Serial In Circuit Programming interface for programs like PonyProg and avrdude
RS232/TTL-Converter: Converts the 5V TTL level of the AVR to the levels needed by a PC serial interface.
Why do I need that ?
If you want to program an AVR controller you need an In-Circuit-Programming interface. These can be connected to a parallel, serial or USB port of the PC.
If you search the Internet you will see that there many variants of ICP interfaces.
With the SerCon you can program all PCB's from our Homepage ( also the PCB's from mikrocontroller.com )
The RS232/TTL converter is needed for the setup, parameterizing and debugging with the MikroKopter-Tool. If you want you can also construct the circuit on a prototype PCB...
In the download area you will find a detailed description, a parts list, a schematic and so on...
Programming the ATMEGA644 of the Main PCB with PonyProg
ToDo: Find a better location for this information
In the past there have been difficulties with AVRDude.
There is now a version of PonyProg that can program the ATMEGA644 using the SerCon: PonyProg V2.6g
Attention: the newer V2.7a does not work! The ATMEGA644 is not in the device database.
Chose the ATMEGA644 as controller.
To use the SerCon chose the following in Interface-Setup:
You must select the following Fuses:
Operation is similar to the BL-Ctrl ( if necessary look in the instructions manual )
Attention: If you use the Flight-Control Software with Bootloader, you have to set the following Fusebits to be able to use the Bootloader afterwards:
Problem Solution: Write failed
If the programming fails with the message "Write failed" the reason may be a wrong parameter for PonyProg. In the PonyProg INI-File change the following values:
- ATMegaPageWriteDelay=100
- AVRByteWriteDelay=50
- AVREraseDelay=100
(The Version 2.06g of PonyProg has 2 ini-files: PONYPROG2000.INI and PonyProg2000_26g.ini. If in doubt change both ).
Problem Solution: locked out of the processor
If after setting inaccurate fuse bits ( or a failed programming with avrdude ) there is no longer access to the processor, you may be able to resurrect it with an external oscillator. See the wiki article AVRWiederbelebung.