#acl AdminGroup:read,write,revert EditorsGroup:read,write,revert All:read

||<class="MK_TableNoBorder">This page as an '''PDF-Document'''? Click on that Symbol and wait a little moment... ---> ||<class="MK_TableNoBorder"><<PDFIcon>>||<class="MK_TableNoBorder" width= 218px )> [[NMEA|{{attachment:symbols/Flagge_EN.jpg}}]]||

{{{#!wiki MK_Nav
||<class="MK_Nav_Header">NMEA||
}}}

<<BR>>

##############################################################################
##############################################################################


<<BR>>
<<TableOfContents>>
<<BR>><<BR>>


##############################################################################
##############################################################################
<<BR>><<BR>><<BR>><<BR>><<BR>><<BR>>

##Einfügen_Start 

=  NMEA =

From software version 2.02a (!FlightCtrl/NaviCtrl) we can also send the '''NMEA''' signal from the UBlox GPS. <<BR>>
If you use a camera with integrated data logging you can use this data to save the position data n the pictures.

You can get the NMEA signal on the contacts '''PIN9''' (TxD) + '''PIN7''' (GND) of your serial output (!FlightCtrl V3) or Debug port (!NaviCtrl).
The data records '''RMC & GGA''' are sent with '' 57600 Baud '' '(default) / TTL (5V).


##############################################################################
##############################################################################
<<BR>><<BR>><<BR>>

== Setting ==
----
##----------------------------------------------------------------------------
## Bild rechts Settings.ini - NMEA

{{{#!html
<div style="float: right; margin: 30px;">
}}}
[[ http://gallery3.mikrokopter.de/var/albums/intern/MK-Tool/Sonstiges/SETTINGS_INI_NMEA_BAUD.jpg?m=1532340996 | {{ http://gallery3.mikrokopter.de/var/thumbs/intern/MK-Tool/Sonstiges/SETTINGS_INI_NMEA_BAUD.jpg?m=1532340997 }} ]]
{{{#!html
</div>
}}}
##----------------------------------------------------------------------------

To send the NMEA signal via PIN9 you '''__need__''' a microSD card ~-(max. 2GB/FAT16)-~ in your !FlightCtrl V3 / !NaviCtrl.

On this microSD card you find the file "SETTINGS.INI". You can open and change this file via an editor. <<BR>>
The output interval of the NMEA signal is set with the parameter ''NMEA_INTERVAL''.

 # NMEA Output interval in ms (0 = disabled) <<BR>>                  
 NMEA_INTERVAL    = 0

By default, the output is disabled (NMEA_INTERVAL    = 0)<<BR>>
If you need a signal e.g. every 500ms set here a "500" (NMEA_INTERVAL    = 500)

The output is 57600 baud. From SW-Version 2.20 you can change the output speed <<BR>>
under "__# Baudrate for the PC-UART__".
<<BR>>


 '''IMPORTANT:''' <<BR>>
 If you change the baud in your SETTINGS.INI all data will be send in this speed !!! <<BR>>
 So if you use e.g. a wireless connection between Copter <-> PC you also have to change here the speed!

~-
 INFO: <<BR>>
 If there is no Parameter "__# NMEA Output interval in ms__" in your SETTINGS.INI, delete the "SETTINGS.ini" on your microSD card. After you power up the copter the Software on your copter will create a new "SETTINGS.INI" with the needed parameters.
-~

##############################################################################
##############################################################################
<<BR>><<BR>><<BR>>

== Check output ==
----
##----------------------------------------------------------------------------
## Bild rechts Settings.ini - NMEA

{{{#!html
<div style="float: right; margin: 30px;">
}}}
[[ http://gallery3.mikrokopter.de/var/albums/intern/MK-Tool/Sonstiges/NMEA-Terminal.jpg?m=1532341796 | {{ http://gallery3.mikrokopter.de/var/thumbs/intern/MK-Tool/Sonstiges/NMEA-Terminal.jpg?m=1532341796 }} ]]
{{{#!html
</div>
}}}
##----------------------------------------------------------------------------

If you set a ''NMEA_INTERVAL'' in your SETTINGS.INI, you can check the output data in the terminal window of your !KopterTool.

For this "click" the button '''[-> !NaviCtrl]''' in your !KopterTool and then the <<BR>>
button '''[Firmware update & Terminal]''' to open the terminal window. <<BR>>
Here you should now see some data like this: <<BR>>


##############################################################################
##############################################################################
<<BR>><<BR>><<BR>><<BR>><<BR>><<BR>>


== Connection ==
----

In these examples the connection is described:

||||<class="MK_TableNoBorder" tablewidth="95%"> ||
||<class="MK_TableNoBorder":>[[ http://gallery3.mikrokopter.de/var/albums/intern/MK-Baugruppen/FlightCtrl/FlightCtrl-V3.0/FC_V3_0_NMEA.jpg?m=1532416912 | {{ http://gallery3.mikrokopter.de/var/thumbs/intern/MK-Baugruppen/FlightCtrl/FlightCtrl-V3.0/FC_V3_0_NMEA.jpg?m=1532416913 }} ]]||<class="MK_TableNoBorder":>[[ http://gallery3.mikrokopter.de/var/albums/intern/MK-Baugruppen/NaviCtrl/NaviCtrl_NMEA.jpg?m=1532416983 | {{ http://gallery3.mikrokopter.de/var/thumbs/intern/MK-Baugruppen/NaviCtrl/NaviCtrl_NMEA.jpg?m=1532416983 }} ]]||
||<class="MK_TableNoBorder":>Serial - !FlightCtrl V3.0 ||<class="MK_TableNoBorder":>Debug - !NaviCtrl ||


##############################################################################
##############################################################################
<<BR>><<BR>><<BR>>

== More informations about NMEA ==
----

More informations about NMEA format you can find here:
 * http://www.kowoma.de/gps/zusatzerklaerungen/NMEA.htm
 * http://aprs.gids.nl/nmea/

##Einfügen_Ende