Unterschiede zwischen den Revisionen 4 und 40 (über 36 Versionen hinweg)

Test setup

Notice

Here is a list of motors that are basically working with BL-Ctl V3. There is no warranty that, the BL-Ctl V3 is working with these motors/propellers under all conditions. We have only done extensive tests with the motors available in our shop. If you use other motors or propeller sizes, you do this on your own risk - no warranty.

BL-Settings

If not other noticed, these curves were recorded with:

24° Timing
20kHz

How to read the curves

With this curves it is easy to estimate the needed current and even estimate the flight-time.

please note that the unit of the currents are in the most graohs in 10mA - that means: 100 is 1A and 1000 is 10A
If there are courves Thrust vs. Setpoint -> 2550 = 100% -> 1270 = 50%

You can get the needed current for each needed thrust

Example

The total weight of a MikroKopter (4 Rotors) is 1400g -> so each motor needs a thrust of 350g for hovering (1400g / 4 = 350g)

Current needed for 350g with the 13x6,5 APC - Propeller? -> 1,8A

Current needed for 350g with the 12x8 APC - Propeller? -> 2,4A

The total current for all four motors would be 7,2A (4 * 1,8A) or 9,6A (4 * 2,4A)

Flight time

You can estimate the flight time with this formular:

Time = 54 * Lipo / Current

(54 because we estimate 10% losses -> 60 * 0,9)

In case we would have a 3300 Lipo (3,3Ah), the Flight time for the 13x6,5 would be:

Time = 54 * 3,3 / 7,2 = 24,7 min

The same for the 12x8 Prop:

Time = 54 * 3,3 / 9,6 = 18,5 min

That is a different of 33% in flight time!

MK3644/24

Successfuly Tested on BL V3 (Firmware 1.10)

MK3644/24 12" Prop 25V

This Prop
This Motor

MK3644/24 13" Prop 25V

This Prop
This Motor

MK3644/24 14" Prop 25V

This Prop
This Motor

MK3644/24 15" Prop 25V

This Prop
This Motor

MK3644/24 16" Prop 25V

This Motor
This Prop

MK3644/24 Propeller comparison

(full range and 0-10A range)

MK3644/24 Thrust vs Setpoint

MK3640

Shoplink

MK3640/34 15" Prop 16V (4S)

MK3640/34 12" Prop 25V (6S)

MK3640/34 13" Prop 25V (6S)

This Prop

MK3640/34 14" Prop 25V (6S)

This Prop

MK3638

Shoplink: MK3638 V2

MK3638 16V (4S) 12" Carbon

This Prop
This Motor

MK3638 4S 14" Carbon

MK3638 4S 15" Carbon

$/!\$ Motors/propellers that are basically working, see notice at top

Altigator A5050

Successfuly Tested on BL V3 (Firmware 1.10)

Altigator A5050 16x5 XOAR 4S

Altigator A5050 16x6 XOAR 4S

Hacker

Hacker A30-24M_UAV_680kV 16x6" 4S

Successfuly Tested on BL V3 (Firmware 1.10)

Timing: 28°

KDE3520XF/400kV

Successfuly Tested on BL V3 (Firmware 1.10)

KDE3520XF/400kV 14x8" Eprop 6S

KDE3520XF/400kV 15x5" 6S

KDE3520XF/400kV 16x5,5" 6S

KDE4012XF/400

Successfuly Tested on BL V3 (Firmware 1.10)

KDE4012XF_400 16" 6S

KDE4012XF_400 17" 6S

KDE4012XF_400 18" 6S

KDE4014XF/380

Successfuly Tested on BL V3 (Firmware 1.10)

Compare to MK3644

KDE4014XF/380 16" 6S

KDE4014XF/380 17" vs. 18" 6S

KDE4014XF/380 18" 6S

T-Motor U5/400

Successfuly Tested on BL V3 (Firmware 1.10)

T-Motor U5/400 16"

T-Motor U5/400 18"

Note: In combination of 18" and 6S Lipo, the motor starts to generate commutation problems at higher currents. We recommend to operate this motor max. with 17" or better with 16" Propellers

T-Motor U7/490

Successfuly tested on BL V3 (Firmware 1.10)

The U7/490 runs perfectly on the BL V3, but we would recommend to select a lower rpm/V and run them on 6S.

T-Motor U7/490 13" 6S

T-Motor U7/490 15x5,5" 4S

T-Motor U7/490 16x5,5" 4S

T-Motor U7/490 17x5,8" 4S

T-Motor U7/490 18" 4S

$/!\$ Note: the 490rpm/V in combination with 18" Prop results in overcurrent (higher that 45A)

BL-Firmware 1.06

BL-Firmware 1.10:

T-Motor U8/135

Successfuly tested on BL V3 (Firmware 1.10)

T-Motor U8/135 28" 6S

Maytech 8626-160-MK

Successfuly tested on BL V3 (Firmware 1.10)

8626-160-MK 6S 29x9,2"

Dualsky XM7010MR-7.5

Successfuly tested on BL V3 (Firmware 1.10)

20" Wood propeller

-> this motor runs also fine with 18" prop

-  ⇤ ← Revision 4 vom 20.10.2014 13:05 → 
  Größe: 10160
  Autor: HolgerB
  Kommentar:
+   ← Revision 40 vom 14.10.2015 12:58 → ⇥
  Größe: 22541
  Autor: HolgerB
  Kommentar: == Hacker A30-24M_UAV_680kV 16x6" 4S ==
-Gelöschter Text ist auf diese Art markiert.
+Hinzugefügter Text ist auf diese Art markiert.
 Zeile 1:
-see also: 
 * FlugZeit 
 * [[en/FlightTime|FlightTime]]
+## page was renamed from MotorCourves
see also: FlugZeit  [[en/FlightTime|FlightTime]]

<<TableOfContents>>
-Zeile 11:
+Zeile 12:
-= MK3644 =
<<TableOfContents>>

= Thrust courves of different motors =
 * How to read the courves is described here: [[en/FlightTime#how_to_read_the_curves|How]]
 * please note that the unit of the current s in 10mA - that means: 100 is 1A and 1000 is 10A
+== Notice ==
Here is a list of motors that are basically working with BL-Ctl V3.
There is no warranty that, the BL-Ctl V3 is working with these motors/propellers under all conditions.
We have only done extensive tests with the motors available in our shop. If you use other motors or propeller sizes, you do this on your own risk - no warranty.

== BL-Settings ==
If not other noticed, these curves were recorded with:
 * 24° Timing
 * 20kHz

= How to read the curves =
With this curves it is easy to estimate the needed current and even estimate the flight-time. 

 * please note that the unit of the currents are in the most graohs in 10mA - that means: 100 is 1A and 1000 is 10A
-Zeile 19:
+Zeile 28:
+You can get the needed current for each needed thrust

== Example ==

The total weight of a MikroKopter (4 Rotors) is 1400g -> so each motor needs a thrust of 350g for hovering (1400g / 4 = 350g)

[[http://gallery.mikrokopter.de/main.php/v/tech/MK3538_characteristic_curve_0-8A_howto.GIF.html|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=67421}}]]

Current needed for 350g with the 13x6,5 APC - Propeller? -> 1,8A

Current needed for 350g with the 12x8 APC - Propeller? -> 2,4A

The total current for all four motors would be 7,2A (4 * 1,8A) or 9,6A (4 * 2,4A)

== Flight time ==
You can estimate the flight time with this formular:

'''Time = 54 * Lipo / Current'''

(54 because we estimate 10% losses -> 60 * 0,9)

In case we would have a 3300 Lipo (3,3Ah), the Flight time for the 13x6,5 would be:

Time = 54 * 3,3 / 7,2 = 24,7 min


The same for the 12x8 Prop:

Time = 54 * 3,3 / 9,6 = 18,5 min

That is a different of 33% in flight time!

See also: FlugZeit
-Zeile 21:
+Zeile 66:
+[[http://gallery.mikrokopter.de/main.php/v/tech/Montiert.jpg.html|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=145037}}]]

##include_3644begin
-Zeile 22:
+Zeile 72:
-[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_12_TvsI_V1_10.gif?m=1412677139 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3644_6S_12_TvsI_V1_10.gif?m=1412677139 }} ]]
+[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_12_TvsI_V1_10-01.gif?m=1424422678 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3644_6S_12_TvsI_V1_10-01.gif?m=1424422679 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_12Zoll_V1_10_TvsS-01.gif?m=1424422693 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3644_6S_12Zoll_V1_10_TvsS-01.gif?m=1424422694 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_12Zoll_V1_10_EvsT-01.gif?m=1424422686 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3644_6S_12Zoll_V1_10_EvsT-01.gif?m=1424422687 }} ]]
-Zeile 42:
+Zeile 96:
+[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_15x5_TvsS.gif?m=1436440213 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3644_6S_15x5_TvsS.gif?m=1436440213 }} ]]
-Zeile 44:
+Zeile 100:
+== MK3644/24 16" Prop 25V ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_16_TvsI_V1_10.gif?m=1436345029 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3644_6S_16_TvsI_V1_10.gif?m=1436345030 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/mk3644_6S_16_TvsS_V1_10.gif?m=1436345254 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/mk3644_6S_16_TvsS_V1_10.gif?m=1436345255 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3644_14_16_Compare.gif?m=1436345023 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3644_14_16_Compare.gif?m=1436345023 }} ]]

 * This [[https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=73&products_id=814|Motor]]

 * This [[https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=75&products_id=839|Prop]]
-Zeile 54:
+Zeile 122:
+##include_3644end

= MK3640 =

[[ http://gallery3.mikrokopter.de/var/resizes/tech/MK3640_5_1.jpg?m=1435759690 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3640_5_1.jpg?m=1435759690 }} ]]

[[https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=73&products_id=887|Shoplink]]


##include_3640begin

== MK3640/34 15" Prop 16V (4S) ==

[[ http://gallery3.mikrokopter.de/var/resizes/tech/MK3640_4S_15x5_TvsI.gif?m=1436513319 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3640_4S_15x5_TvsI.gif?m=1436513318 }} ]]

[[ http://gallery3.mikrokopter.de/var/resizes/tech/MK3640_4S_15x5_TvsS.gif?m=1436513324 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3640_4S_15x5_TvsS.gif?m=1436513323 }} ]]


== MK3640/34 12" Prop 25V (6S) ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/MK364034_1238CFK_6S_TvsI.gif?m=1435758890 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK364034_1238CFK_6S_TvsI.gif?m=1435758889 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK364034_1238CFK_6S_TvsS_csv.gif?m=1435758962 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK364034_1238CFK_6S_TvsS_csv.gif?m=1435758962 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK364034_1238CFK_6S_EvsT.gif?m=1435758914 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK364034_1238CFK_6S_EvsT.gif?m=1435758913 }} ]]


== MK3640/34 13" Prop 25V (6S) ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/MK364034_1342CFK_6S_TvsS.gif?m=1435758905 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK364034_1342CFK_6S_TvsS.gif?m=1435758905 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK364034_1342CFK_6S_TvsI.gif?m=1435758900 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK364034_1342CFK_6S_TvsI.gif?m=1435758900 }} ]]

 * This [[https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=75&products_id=749|Prop]]

== MK3640/34 14" Prop 25V (6S) ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/MK364034_1445CFK_6S_TvsS.gif?m=1435758896 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK364034_1445CFK_6S_TvsS.gif?m=1435758896 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK364034_1445CFK_6S_TvsI.gif?m=1435759497 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK364034_1445CFK_6S_TvsI.gif?m=1435759496 }} ]]

 * This [[https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=75&products_id=713|Prop]]

##include_3640end



= MK3638 =

{{ http://gallery3.mikrokopter.de/var/thumbs/intern/MK-Baugruppen/MK3638_V2/MK36385V2.jpg?m=1420559771 }}

'''Shoplink: [[https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=73&products_id=615|MK3638 V2]]'''

##include_3638_begin

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3538_characteristic_curve.gif?m=1409673363 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3538_characteristic_curve.gif?m=1410812398 }} ]]

== MK3638 16V (4S) 12" Carbon ==

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3638_4S_12Zoll_TvsI.gif?m=1418913043 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3638_4S_12Zoll_TvsI.gif?m=1418913044 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3638_4S_12Zoll_TvsS.gif?m=1418913053 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3638_4S_12Zoll_TvsS.gif?m=1418913054 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3638_4S_12Zoll_Efficiency.gif?m=1418913060 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3638_4S_12Zoll_Efficiency.gif?m=1418913060 }} ]]

 * This [[https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=75&products_id=836|Prop]]
 * This [[https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=73&products_id=615|Motor]]

== MK3638 4S 14" Carbon ==

[[  http://gallery3.mikrokopter.de/var/albums/tech/MK3638_4S_14x45_TvsS.gif?m=1436461393 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3638_4S_14x45_TvsS.gif?m=1436461394 }} ]]

[[  http://gallery3.mikrokopter.de/var/albums/tech/MK3638_4S_14x45_TvsI.gif?m=1436461385 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3638_4S_14x45_TvsI.gif?m=1436461385 }} ]]

== MK3638 4S 15" Carbon ==
[[  http://gallery3.mikrokopter.de/var/albums/tech/MK3638_4S_14x45_TvsS.gif?m=1436461393 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3638_4S_14x45_TvsS.gif?m=1436461394 }} ]]

[[  http://gallery3.mikrokopter.de/var/albums/tech/MK3638_4S_14x45_TvsI.gif?m=1436461385 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3638_4S_14x45_TvsI.gif?m=1436461385 }} ]]

##include_3638_end

------
/!\ '''Motors/propellers that are basically working, see notice at top'''
-Zeile 61:
+Zeile 212:
-Zeile 64:
+Zeile 217:
+= Hacker =
== Hacker A30-24M_UAV_680kV 16x6" 4S ==
Successfuly Tested on BL V3 (Firmware 1.10)

Timing: 28°

[[ http://gallery3.mikrokopter.de/var/albums/tech/Hacker_A30-24M_UAV_680kV_16x5_4S_TvsI.gif?m=1444820060 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/Hacker_A30-24M_UAV_680kV_16x5_4S_TvsI.gif?m=1444820061 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/Hacker_A30-24M_UAV_680kV_16x5_4S_TvsS.gif?m=1444820067 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/Hacker_A30-24M_UAV_680kV_16x5_4S_TvsS.gif?m=1444820068 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/Hacker_A30-24M_UAV_680kV_16x5_4S_EvsT.gif?m=1444820052 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/Hacker_A30-24M_UAV_680kV_16x5_4S_EvsT.gif?m=1444820053 }} ]]
-Zeile 66:
+Zeile 234:
+[[ http://gallery3.mikrokopter.de/var/resizes/tech/KDE3520XF_400kV_Eprop-01.jpg?m=1413884213 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/KDE3520XF_400kV_Eprop-01.jpg?m=1413884213 }} ]]
-Zeile 98:
+Zeile 268:
-= KDE4012XF/400 =
Successfuly Tested on BL V3 (Firmware 1.10)
+= KDE4014XF/380 =
Successfuly Tested on BL V3 (Firmware 1.10)
-Zeile 107:
+Zeile 278:
-== KDE4012XF/400 16" 6S ==
+== KDE4014XF/380 16" 6S ==
-Zeile 112:
+Zeile 283:
-== KDE4012XF/400 17" vs. 18" 6S ==
+== KDE4014XF/380 17" vs. 18" 6S ==
-Zeile 116:
+Zeile 287:
-== KDE4012XF/400 18" 6S ==
+== KDE4014XF/380 18" 6S ==
-Zeile 127:
+Zeile 298:
-== T-Motor U5/400 16" ==
+== T-Motor U5/400 18" ==
-Zeile 135:
+Zeile 306:
-Successfuly Tested on BL V3 (Firmware 1.10)
== T-Motor U7/490 18" ==
+Successfuly tested on BL V3 (Firmware 1.10)

The U7/490 runs perfectly on the BL V3, but we would recommend to select a lower rpm/V and run them on 6S.

== T-Motor U7/490 13" 6S ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_16x55_TvsS.gif?m=1413883146 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U7_490kV_4S_16x55_TvsS.gif?m=1413883146 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_6S_13_TvsS.gif?m=1413883153 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U7_490kV_6S_13_TvsS.gif?m=1413883154 }} ]]

== T-Motor U7/490 15x5,5" 4S ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_15x55_TvsI.gif?m=1413882881 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U7_490kV_4S_15x55_TvsI.gif?m=1413882881 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_15x55_TvsS.gif?m=1413882885 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U7_490kV_4S_15x55_TvsS.gif?m=1413882885 }} ]]

== T-Motor U7/490 16x5,5" 4S ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_16x55_TvsI.gif?m=1413882890 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U7_490kV_4S_16x55_TvsI.gif?m=1413882891 }} ]]

== T-Motor U7/490 17x5,8" 4S ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_17x58_TcsI.gif?m=1413883265 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U7_490kV_4S_17x58_TcsI.gif?m=1413883266 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_18_%2842ALimit%29_TvsS_csv.gif?m=1413883557 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U7_490kV_4S_18_%2842ALimit%29_TvsS_csv.gif?m=1413883557 }} ]]

== T-Motor U7/490 18" 4S ==
/!\ Note: the 490rpm/V in combination with 18" Prop results in overcurrent (higher that 45A)

'''BL-Firmware 1.06'''
-Zeile 139:
+Zeile 335:
+'''BL-Firmware 1.10:'''

[[ http://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_18_TvsI_V1_10.gif?m=1413883274 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U7_490kV_4S_18_TvsI_V1_10.gif?m=1413883274 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_18_%2842ALimit%29_TvsS_csv.gif?m=1413883557 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U7_490kV_4S_18_%2842ALimit%29_TvsS_csv.gif?m=1413883557 }} ]]
-Zeile 140:
+Zeile 342:
-Successfuly Tested on BL V3 (Firmware 1.10))
+Successfuly tested on BL V3 (Firmware 1.10)
-Zeile 145:
+Zeile 347:
+[[ http://gallery3.mikrokopter.de/var/albums/tech/U8_28_135kV_6S_TvsS.gif?m=1424422198 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U8_28_135kV_6S_TvsS.gif?m=1424422199 }} ]]
-Zeile 146:
+Zeile 350:
+= Maytech 8626-160-MK =
Successfuly tested on BL V3 (Firmware 1.10)

[[ http://gallery3.mikrokopter.de/tech/May8626-160-MK | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/May8626-160-MK.jpg?m=1436523813 }} ]]

== 8626-160-MK 6S 29x9,2" ==

[[ http://gallery3.mikrokopter.de/var/albums/tech/Maytech_8626-160-MK_6S_29x92_TvsS.gif?m=1436523798 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/Maytech_8626-160-MK_6S_29x92_TvsS.gif?m=1436523799 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/Maytech_8626-160-MK_6S_29x92_TvsI.gif?m=1436523794 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/Maytech_8626-160-MK_6S_29x92_TvsI.gif?m=1436523794 }} ]]



= Dualsky XM7010MR-7.5 =
Successfuly tested on BL V3 (Firmware 1.10)

== 20" Wood propeller ==

[[ http://gallery3.mikrokopter.de/var/albums/tech/MX7010MR75_20x6_6S_TvyI.gif?m=1436342384 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MX7010MR75_20x6_6S_TvyI.gif?m=1436342385 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MX7010MR75_20x6_6S.gif?m=1436342389 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MX7010MR75_20x6_6S.gif?m=1436342389 }} ]]

-> this motor runs also fine with 18" prop