Unterschiede zwischen den Revisionen 2 und 5 (über 3 Versionen hinweg)
⇤ ← Revision 2 vom 20.10.2014 12:48 →
Größe: 7519
Autor: HolgerB
Kommentar:
← Revision 5 vom 20.10.2014 13:05 → ⇥
Größe: 10162
Autor: HolgerB
Kommentar:
Gelöschter Text ist auf diese Art markiert. Hinzugefügter Text ist auf diese Art markiert.
Zeile 4: Zeile 4:

= Test setup =

[[ http://gallery3.mikrokopter.de/var/albums/tech/U8_28_135kV_6S.jpg?m=1413802451 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U8_28_135kV_6S.jpg?m=1413802451 }} ]]
Zeile 16: Zeile 20:
Successfuly Tested on BL V3 (Firmware 1.10)
Zeile 49: Zeile 54:
= Altigator A5050 =
Successfuly Tested on BL V3 (Firmware 1.10)
== Altigator A5050 16x5 XOAR 4S ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/Altigator_A5050_4S_16x5_TvsI.gif?m=1413802701 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/Altigator_A5050_4S_16x5_TvsI.gif?m=1413802701 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/Altigator_A5050_4S_16x5_TvsS.gif?m=1413802706 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/Altigator_A5050_4S_16x5_TvsS.gif?m=1413802706 }} ]]

== Altigator A5050 16x6 XOAR 4S ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/Altigator_A5050_4S_16x6_TvsI.gif?m=1413802709 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/Altigator_A5050_4S_16x6_TvsI.gif?m=1413802710 }} ]]
Zeile 51: Zeile 65:
Tested on BL V3 (Firmware 1.10) Successfuly Tested on BL V3 (Firmware 1.10)
Zeile 69: Zeile 83:
Tested on BL V3 (Firmware 1.10) Successfuly Tested on BL V3 (Firmware 1.10)
Zeile 85: Zeile 99:
Tested on BL V3 (Firmware 1.10) Successfuly Tested on BL V3 (Firmware 1.10)
Zeile 93: Zeile 108:
= KDE4012XF/400 16" 6S = == KDE4012XF/400 16" 6S ==
Zeile 98: Zeile 113:
= KDE4012XF/400 17" vs. 18" 6S = == KDE4012XF/400 17" vs. 18" 6S ==
Zeile 102: Zeile 117:
= KDE4012XF/400 18" 6S = == KDE4012XF/400 18" 6S ==
Zeile 107: Zeile 122:

= T-Motor U5/400 =
Successfuly Tested on BL V3 (Firmware 1.10)
== T-Motor U5/400 16" ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/U5_16x55_6S-01.gif?m=1413802197 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U5_16x55_6S-01.gif?m=1413802197 }} ]]

== T-Motor U5/400 16" ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/U5_400_18_Critical2-01.gif?m=1413802206 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U5_400_18_Critical2-01.gif?m=1413802206 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/U5_400_18_Critical-01.gif?m=1413802201 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U5_400_18_Critical-01.gif?m=1413802201 }} ]]

Note: In combination of 18" and 6S Lipo, the motor starts to generate commutation problems at higher currents. We recommend to operate this motor max. with 17" or better with 16" Propellers

= T-Motor U7/490 =
Successfuly Tested on BL V3 (Firmware 1.10)
== T-Motor U7/490 18" ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_18_TvsI.gif?m=1413802446 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U7_490kV_4S_18_TvsI.gif?m=1413802447 }} ]]

= T-Motor U8/135 =
Successfuly Tested on BL V3 (Firmware 1.10))
== T-Motor U8/135 28" 6S ==

[[ http://gallery3.mikrokopter.de/var/albums/tech/U8_28_135kV_6S_Test4_up_down.gif?m=1413802455 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U8_28_135kV_6S_Test4_up_down.gif?m=1413802456 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/U8_28_135kV_6S.jpg?m=1413802451 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U8_28_135kV_6S.jpg?m=1413802451 }} ]]

see also:

Test setup

https://gallery3.mikrokopter.de/var/albums/tech/U8_28_135kV_6S.jpg?m=1413802451

https://gallery3.mikrokopter.de/var/albums/tech/KDE4014XF-380_18_6S_Ozkan.gif?m=1413802069

MK3644

Inhaltsverzeichnis

  1. Test setup
  2. MK3644
  3. Thrust courves of different motors
  4. MK3644/24
    1. MK3644/24 12" Prop 25V
    2. MK3644/24 13" Prop 25V
    3. MK3644/24 14" Prop 25V
    4. MK3644/24 15" Prop 25V
    5. MK3644/24 Propeller comparison
    6. MK3644/24 Thrust vs Setpoint
  5. Altigator A5050
    1. Altigator A5050 16x5 XOAR 4S
    2. Altigator A5050 16x6 XOAR 4S
  6. KDE3520XF/400kV
    1. KDE3520XF/400kV 14x8" Eprop 6S
    2. KDE3520XF/400kV 15x5" 6S
    3. KDE3520XF/400kV 16x5,5" 6S
  7. KDE4012XF/400
    1. KDE4012XF_400 16" 6S
    2. KDE4012XF_400 17" 6S
    3. KDE4012XF_400 18" 6S
  8. KDE4012XF/400
    1. Compare to MK3644
    2. KDE4012XF/400 16" 6S
    3. KDE4012XF/400 17" vs. 18" 6S
    4. KDE4012XF/400 18" 6S
  9. T-Motor U5/400
    1. T-Motor U5/400 16"
    2. T-Motor U5/400 16"
  10. T-Motor U7/490
    1. T-Motor U7/490 18"
  11. T-Motor U8/135
    1. T-Motor U8/135 28" 6S

Thrust courves of different motors

  • How to read the courves is described here: How

  • please note that the unit of the current s in 10mA - that means: 100 is 1A and 1000 is 10A

  • If there are courves Thrust vs. Setpoint -> 2550 = 100% -> 1270 = 50%

MK3644/24

Successfuly Tested on BL V3 (Firmware 1.10)

MK3644/24 12" Prop 25V

https://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_12_TvsI_V1_10.gif?m=1412677139

MK3644/24 13" Prop 25V

https://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_13_TvsI_V1_10.gif?m=1412677181

MK3644/24 14" Prop 25V

https://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_14_TvsI_V1_10.gif?m=1412677155

MK3644/24 15" Prop 25V

https://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_15x5_TvsI_V1_10.gif?m=1412677170

MK3644/24 Propeller comparison

https://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_TvsI_Compare_12-15.gif?m=1412677197https://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_12_TvsI_PropCompare_0-10A.gif?m=1412677207

(full range and 0-10A range)

MK3644/24 Thrust vs Setpoint

https://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_12_TvsS_PropCompare.gif?m=1412678531

Altigator A5050

Successfuly Tested on BL V3 (Firmware 1.10)

Altigator A5050 16x5 XOAR 4S

https://gallery3.mikrokopter.de/var/albums/tech/Altigator_A5050_4S_16x5_TvsI.gif?m=1413802701

https://gallery3.mikrokopter.de/var/albums/tech/Altigator_A5050_4S_16x5_TvsS.gif?m=1413802706

Altigator A5050 16x6 XOAR 4S

https://gallery3.mikrokopter.de/var/albums/tech/Altigator_A5050_4S_16x6_TvsI.gif?m=1413802709

KDE3520XF/400kV

Successfuly Tested on BL V3 (Firmware 1.10)

KDE3520XF/400kV 14x8" Eprop 6S

https://gallery3.mikrokopter.de/var/albums/tech/KDE3520XF_400kV_14x8Eprop_6S_TvsI-01.gif?m=1413800269

https://gallery3.mikrokopter.de/var/albums/tech/KDE3520XF_400kV_14x8Eprop_6S_TvsS-01.gif?m=1413800277

https://gallery3.mikrokopter.de/var/albums/tech/KDE3520XF_400kV_14x8Eprop_6S_Effectivity-01.gif?m=1413800274

KDE3520XF/400kV 15x5" 6S

https://gallery3.mikrokopter.de/var/albums/tech/KDE3520XF_400kV_15x5_6S_TvsI.gif?m=1413800660

https://gallery3.mikrokopter.de/var/albums/tech/KDE3520XF_400kV_15x5_6S_TvsS.gif?m=1413800664

KDE3520XF/400kV 16x5,5" 6S

https://gallery3.mikrokopter.de/var/albums/tech/KDE3520XF_400kV_16x5_6S_TvsI.gif?m=1413800669

KDE4012XF/400

Successfuly Tested on BL V3 (Firmware 1.10)

KDE4012XF_400 16" 6S

https://gallery3.mikrokopter.de/var/albums/tech/KDE4012XF_400_16_6S_Graf_TvsI_csv.gif?m=1413800898

https://gallery3.mikrokopter.de/var/albums/tech/KDE4012XF_400_16_6S_Graf_TvsS_csv.gif?m=1413800902

KDE4012XF_400 17" 6S

https://gallery3.mikrokopter.de/var/albums/tech/KDE4012XF_400_17_6S_Graf_TvsI.gif?m=1413801158

KDE4012XF_400 18" 6S

https://gallery3.mikrokopter.de/var/albums/tech/KDE4012XF_400_18_6S_Graf_TvsI.gif?m=1413801161

https://gallery3.mikrokopter.de/var/albums/tech/KDE4012XF_400_18_6S_Graf_TvsS.gif?m=1413801167

KDE4012XF/400

Successfuly Tested on BL V3 (Firmware 1.10)

https://gallery3.mikrokopter.de/var/resizes/tech/KDE4014XF-380_18_6S_1.JPG?m=1413801490

Compare to MK3644

https://gallery3.mikrokopter.de/var/albums/tech/KDE4014_vs_MK3644.gif?m=1413801391

https://gallery3.mikrokopter.de/var/albums/tech/KDE4014XF-380_16_6S_graph_TvsI.gif?m=1413801396

KDE4012XF/400 16" 6S

https://gallery3.mikrokopter.de/var/albums/tech/KDE4014XF-380_16_6S_graph_TvsI.gif?m=1413801396

https://gallery3.mikrokopter.de/var/albums/tech/KDE4014XF-380_16_6S_graph_TvsS.gif?m=1413801399

KDE4012XF/400 17" vs. 18" 6S

https://gallery3.mikrokopter.de/var/albums/tech/KDE4014XF-380_17And18_6S_graph_TvsI_Compare.gif?m=1413801486

KDE4012XF/400 18" 6S

https://gallery3.mikrokopter.de/var/albums/tech/KDE4014XF-380_18_6S_graph.gif?m=1413801494

https://gallery3.mikrokopter.de/var/albums/tech/KDE4014XF-380_18_6S_graph2.gif?m=1413801981

T-Motor U5/400

Successfuly Tested on BL V3 (Firmware 1.10)

T-Motor U5/400 16"

https://gallery3.mikrokopter.de/var/albums/tech/U5_16x55_6S-01.gif?m=1413802197

T-Motor U5/400 16"

https://gallery3.mikrokopter.de/var/albums/tech/U5_400_18_Critical2-01.gif?m=1413802206

https://gallery3.mikrokopter.de/var/albums/tech/U5_400_18_Critical-01.gif?m=1413802201

Note: In combination of 18" and 6S Lipo, the motor starts to generate commutation problems at higher currents. We recommend to operate this motor max. with 17" or better with 16" Propellers

T-Motor U7/490

Successfuly Tested on BL V3 (Firmware 1.10)

T-Motor U7/490 18"

https://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_18_TvsI.gif?m=1413802446

T-Motor U8/135

Successfuly Tested on BL V3 (Firmware 1.10))

T-Motor U8/135 28" 6S

https://gallery3.mikrokopter.de/var/albums/tech/U8_28_135kV_6S_Test4_up_down.gif?m=1413802455

https://gallery3.mikrokopter.de/var/albums/tech/U8_28_135kV_6S.jpg?m=1413802451