Unterschiede zwischen den Revisionen 13 und 31 (über 18 Versionen hinweg)

Test setup

Notice

Here is a list of motors that are basically working with BL-Ctl V3. There is no warranty that, the BL-Ctl V3 is working with these motors/propellers under all conditions. We have only done extensive tests with the motors available in our shop. If you use other motors or propeller sizes, you do this on your own risk - no warranty.

BL-Settings

If not other noticed, these curves were recorded with:

24° Timing
20kHz

How to read the curves

With this curves it is easy to estimate the needed current and even estimate the flight-time.

please note that the unit of the currents are in the most graohs in 10mA - that means: 100 is 1A and 1000 is 10A
If there are courves Thrust vs. Setpoint -> 2550 = 100% -> 1270 = 50%

You can get the needed current for each needed thrust

Example

The total weight of a MikroKopter (4 Rotors) is 1400g -> so each motor needs a thrust of 350g for hovering (1400g / 4 = 350g)

Current needed for 350g with the 13x6,5 APC - Propeller? -> 1,8A

Current needed for 350g with the 12x8 APC - Propeller? -> 2,4A

The total current for all four motors would be 7,2A (4 * 1,8A) or 9,6A (4 * 2,4A)

Flight time

You can estimate the flight time with this formular:

Time = 54 * Lipo / Current

(54 because we estimate 10% losses -> 60 * 0,9)

In case we would have a 3300 Lipo (3,3Ah), the Flight time for the 13x6,5 would be:

Time = 54 * 3,3 / 7,2 = 24,7 min

The same for the 12x8 Prop:

Time = 54 * 3,3 / 9,6 = 18,5 min

That is a different of 33% in flight time!

MK3644/24

Successfuly Tested on BL V3 (Firmware 1.10)

MK3644/24 12" Prop 25V

This Prop
This Motor

MK3644/24 13" Prop 25V

This Prop
This Motor

MK3644/24 14" Prop 25V

This Prop
This Motor

MK3644/24 15" Prop 25V

This Prop
This Motor

MK3644/24 16" Prop 25V

This Motor
This Prop

MK3644/24 Propeller comparison

(full range and 0-10A range)

MK3644/24 Thrust vs Setpoint

MK3640

MK3640/34 12" Prop 25V

MK3640/34 13" Prop 25V

This Prop

MK3640/34 14" Prop 25V

This Prop

MK3638 4S

MK3638 4S 12" Carbon

This Prop
This Motor

$/!\$ Motors/propellers that are basically working, see notice at top

Altigator A5050

Successfuly Tested on BL V3 (Firmware 1.10)

Altigator A5050 16x5 XOAR 4S

Altigator A5050 16x6 XOAR 4S

KDE3520XF/400kV

Successfuly Tested on BL V3 (Firmware 1.10)

KDE3520XF/400kV 14x8" Eprop 6S

KDE3520XF/400kV 15x5" 6S

KDE3520XF/400kV 16x5,5" 6S

KDE4012XF/400

Successfuly Tested on BL V3 (Firmware 1.10)

KDE4012XF_400 16" 6S

KDE4012XF_400 17" 6S

KDE4012XF_400 18" 6S

KDE4014XF/380

Successfuly Tested on BL V3 (Firmware 1.10)

Compare to MK3644

KDE4014XF/380 16" 6S

KDE4014XF/380 17" vs. 18" 6S

KDE4014XF/380 18" 6S

T-Motor U5/400

Successfuly Tested on BL V3 (Firmware 1.10)

T-Motor U5/400 16"

T-Motor U5/400 18"

Note: In combination of 18" and 6S Lipo, the motor starts to generate commutation problems at higher currents. We recommend to operate this motor max. with 17" or better with 16" Propellers

T-Motor U7/490

Successfuly tested on BL V3 (Firmware 1.10)

The U7/490 runs perfectly on the BL V3, but we would recommend to select a lower rpm/V and run them on 6S.

T-Motor U7/490 13" 6S

T-Motor U7/490 15x5,5" 4S

T-Motor U7/490 16x5,5" 4S

T-Motor U7/490 17x5,8" 4S

T-Motor U7/490 18" 4S

$/!\$ Note: the 490rpm/V in combination with 18" Prop results in overcurrent (higher that 45A)

BL-Firmware 1.06

BL-Firmware 1.10:

T-Motor U8/135

Successfuly Tested on BL V3 (Firmware 1.10))

T-Motor U8/135 28" 6S

Dualsky XM7010MR-7.5

20" Wood propeller

-> this motor runs also fine with 18" prop

-  ⇤ ← Revision 13 vom 21.10.2014 11:34 → 
  Größe: 13612
  Autor: HolgerB
  Kommentar:
+   ← Revision 31 vom 08.07.2015 10:56 → ⇥
  Größe: 18894
  Autor: HolgerB
  Kommentar:
-Gelöschter Text ist auf diese Art markiert.
+Hinzugefügter Text ist auf diese Art markiert.
 Zeile 12:
+== Notice ==
Here is a list of motors that are basically working with BL-Ctl V3.
There is no warranty that, the BL-Ctl V3 is working with these motors/propellers under all conditions.
We have only done extensive tests with the motors available in our shop. If you use other motors or propeller sizes, you do this on your own risk - no warranty.

== BL-Settings ==
If not other noticed, these curves were recorded with:
 * 24° Timing
 * 20kHz
-Zeile 53:
+Zeile 63:
+##include_3644begin
-Zeile 56:
+Zeile 68:
-[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_12_TvsI_V1_10.gif?m=1412677139 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3644_6S_12_TvsI_V1_10.gif?m=1412677139 }} ]]
+[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_12_TvsI_V1_10-01.gif?m=1424422678 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3644_6S_12_TvsI_V1_10-01.gif?m=1424422679 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_12Zoll_V1_10_TvsS-01.gif?m=1424422693 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3644_6S_12Zoll_V1_10_TvsS-01.gif?m=1424422694 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_12Zoll_V1_10_EvsT-01.gif?m=1424422686 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3644_6S_12Zoll_V1_10_EvsT-01.gif?m=1424422687 }} ]]
-Zeile 79:
+Zeile 95:
+== MK3644/24 16" Prop 25V ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_16_TvsI_V1_10.gif?m=1436345029 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3644_6S_16_TvsI_V1_10.gif?m=1436345030 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/mk3644_6S_16_TvsS_V1_10.gif?m=1436345254 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/mk3644_6S_16_TvsS_V1_10.gif?m=1436345255 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3644_14_16_Compare.gif?m=1436345023 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3644_14_16_Compare.gif?m=1436345023 }} ]]

 * This [[https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=73&products_id=814|Motor]]

 * This [[https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=75&products_id=839|Prop]]
-Zeile 88:
+Zeile 116:
+##include_3644end

= MK3640 =

== MK3640/34 12" Prop 25V ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/MK364034_1238CFK_6S_TvsI.gif?m=1435758890 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK364034_1238CFK_6S_TvsI.gif?m=1435758889 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK364034_1238CFK_6S_TvsS_csv.gif?m=1435758962 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK364034_1238CFK_6S_TvsS_csv.gif?m=1435758962 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK364034_1238CFK_6S_EvsT.gif?m=1435758914 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK364034_1238CFK_6S_EvsT.gif?m=1435758913 }} ]]


== MK3640/34 13" Prop 25V ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/MK364034_1342CFK_6S_TvsS.gif?m=1435758905 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK364034_1342CFK_6S_TvsS.gif?m=1435758905 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK364034_1342CFK_6S_TvsI.gif?m=1435758900 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK364034_1342CFK_6S_TvsI.gif?m=1435758900 }} ]]

 * This [[https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=75&products_id=749|Prop]]

== MK3640/34 14" Prop 25V ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/MK364034_1445CFK_6S_TvsS.gif?m=1435758896 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK364034_1445CFK_6S_TvsS.gif?m=1435758896 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK364034_1445CFK_6S_TvsI.gif?m=1435759497 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK364034_1445CFK_6S_TvsI.gif?m=1435759496 }} ]]

 * This [[https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=75&products_id=713|Prop]]



##include_3638_begin
-Zeile 91:
+Zeile 149:
+== MK3638 4S 12" Carbon ==

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3638_4S_12Zoll_TvsI.gif?m=1418913043 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3638_4S_12Zoll_TvsI.gif?m=1418913044 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3638_4S_12Zoll_TvsS.gif?m=1418913053 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3638_4S_12Zoll_TvsS.gif?m=1418913054 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3638_4S_12Zoll_Efficiency.gif?m=1418913060 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3638_4S_12Zoll_Efficiency.gif?m=1418913060 }} ]]

 * This [[https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=75&products_id=836|Prop]]
 * This [[https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=73&products_id=615|Motor]]

##include_3638_end

------
/!\ '''Motors/propellers that are basically working, see notice at top'''
-Zeile 99:
+Zeile 175:
-Zeile 105:
+Zeile 183:
+[[ http://gallery3.mikrokopter.de/var/resizes/tech/KDE3520XF_400kV_Eprop-01.jpg?m=1413884213 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/KDE3520XF_400kV_Eprop-01.jpg?m=1413884213 }} ]]
-Zeile 199:
+Zeile 279:
+'''BL-Firmware 1.06'''
-Zeile 201:
+Zeile 283:
-(BL-Firmware 1.06)
+'''BL-Firmware 1.10:'''
-Zeile 204:
+Zeile 286:
-(BL-Firmware 1.10)
-Zeile 215:
+Zeile 295:
+[[ http://gallery3.mikrokopter.de/var/albums/tech/U8_28_135kV_6S_TvsS.gif?m=1424422198 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U8_28_135kV_6S_TvsS.gif?m=1424422199 }} ]]
-Zeile 216:
+Zeile 298:
+= Dualsky XM7010MR-7.5 =

== 20" Wood propeller ==

[[ http://gallery3.mikrokopter.de/var/albums/tech/MX7010MR75_20x6_6S_TvyI.gif?m=1436342384 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MX7010MR75_20x6_6S_TvyI.gif?m=1436342385 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MX7010MR75_20x6_6S.gif?m=1436342389 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MX7010MR75_20x6_6S.gif?m=1436342389 }} ]]

-> this motor runs also fine with 18" prop