Unterschiede zwischen den Revisionen 1 und 52 (über 51 Versionen hinweg)
⇤ ← Revision 1 vom 20.10.2014 12:29 →
Größe: 4648
Autor: HolgerB
Kommentar: New
← Revision 52 vom 27.02.2019 11:07 → ⇥
Größe: 28115
Autor: IngoBusker
Kommentar:
Gelöschter Text ist auf diese Art markiert. Hinzugefügter Text ist auf diese Art markiert.
Zeile 1: Zeile 1:
see also:
 * FlugZeit
 * [[en/FlightTime|FlightTime]]

= MK3644 =		 ## page was renamed from MotorCourves
see also: FlugZeit [[en/FlightTime|FlightTime]]
Zeile 8: Zeile 6:
= Thrust courves of different motors =
 * How to read the courves is described here: [[en/FlightTime#how_to_read_the_curves|How]]
 * please note that the unit of the current s in 10mA - that means: 100 is 1A and 1000 is 10A		 = Test setup =

[[ http://gallery3.mikrokopter.de/var/albums/tech/U8_28_135kV_6S.jpg?m=1413802451 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U8_28_135kV_6S.jpg?m=1413802451 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/KDE4014XF-380_18_6S_Ozkan.gif?m=1413802069 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/KDE4014XF-380_18_6S_Ozkan.gif?m=1413802069 }} ]]

== Notice ==
Here is a list of motors that are basically working with BL-Ctl V3.
There is no warranty that, the BL-Ctl V3 is working with these motors/propellers under all conditions.
We have only done extensive tests with the motors available in our shop. If you use other motors or propeller sizes, you do this on your own risk - no warranty.

== BL-Settings ==
If not other noticed, these curves were recorded with:
 * 24° Timing
 * 20kHz

= How to read the curves =
With this curves it is easy to estimate the needed current and even estimate the flight-time.

 * please note that the unit of the currents are in the most graohs in 10mA - that means: 100 is 1A and 1000 is 10A
Zeile 13: Zeile 28:
You can get the needed current for each needed thrust

== Example ==

The total weight of a MikroKopter (4 Rotors) is 1400g -> so each motor needs a thrust of 350g for hovering (1400g / 4 = 350g)

[[http://gallery.mikrokopter.de/main.php/v/tech/MK3538_characteristic_curve_0-8A_howto.GIF.html|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=67421}}]]

Current needed for 350g with the 13x6,5 APC - Propeller? -> 1,8A

Current needed for 350g with the 12x8 APC - Propeller? -> 2,4A

The total current for all four motors would be 7,2A (4 * 1,8A) or 9,6A (4 * 2,4A)

== Flight time ==
You can estimate the flight time with this formular:

'''Time = 54 * Lipo / Current'''

(54 because we estimate 10% losses -> 60 * 0,9)

In case we would have a 3300 Lipo (3,3Ah), the Flight time for the 13x6,5 would be:

Time = 54 * 3,3 / 7,2 = 24,7 min


The same for the 12x8 Prop:

Time = 54 * 3,3 / 9,6 = 18,5 min

That is a different of 33% in flight time!

See also: FlugZeit
Zeile 14: Zeile 65:
Successfuly Tested on BL V3 (Firmware 1.10)

[[http://gallery.mikrokopter.de/main.php/v/tech/Montiert.jpg.html|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=145037}}]]

##include_3644begin
Zeile 15: Zeile 72:
[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_12_TvsI_V1_10.gif?m=1412677139 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3644_6S_12_TvsI_V1_10.gif?m=1412677139 }} ]] [[ http://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_12_TvsI_V1_10-01.gif?m=1424422678 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3644_6S_12_TvsI_V1_10-01.gif?m=1424422679 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_12Zoll_V1_10_TvsS-01.gif?m=1424422693 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3644_6S_12Zoll_V1_10_TvsS-01.gif?m=1424422694 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_12Zoll_V1_10_EvsT-01.gif?m=1424422686 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3644_6S_12Zoll_V1_10_EvsT-01.gif?m=1424422687 }} ]]
Zeile 35: Zeile 96:
[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_15x5_TvsS.gif?m=1436440213 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3644_6S_15x5_TvsS.gif?m=1436440213 }} ]]
Zeile 38: Zeile 101:
== MK3644/24 16" Prop 25V ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_16_TvsI_V1_10.gif?m=1436345029 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3644_6S_16_TvsI_V1_10.gif?m=1436345030 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/mk3644_6S_16_TvsS_V1_10.gif?m=1436345254 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/mk3644_6S_16_TvsS_V1_10.gif?m=1436345255 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3644_14_16_Compare.gif?m=1436345023 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3644_14_16_Compare.gif?m=1436345023 }} ]]

 * This [[https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=73&products_id=814|Motor]]

 * This [[https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=75&products_id=839|Prop]]
Zeile 47: Zeile 122:
##include_3644end

= MK3640 =

[[ http://gallery3.mikrokopter.de/var/resizes/tech/MK3640_5_1.jpg?m=1435759690 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3640_5_1.jpg?m=1435759690 }} ]]

[[https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=73&products_id=887|Shoplink]]


##include_3640begin

== MK3640/34 15" Prop 16V (4S) ==

[[ http://gallery3.mikrokopter.de/var/resizes/tech/MK3640_4S_15x5_TvsI.gif?m=1436513319 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3640_4S_15x5_TvsI.gif?m=1436513318 }} ]]

[[ http://gallery3.mikrokopter.de/var/resizes/tech/MK3640_4S_15x5_TvsS.gif?m=1436513324 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3640_4S_15x5_TvsS.gif?m=1436513323 }} ]]


== MK3640/34 12" Prop 25V (6S) ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/MK364034_1238CFK_6S_TvsI.gif?m=1435758890 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK364034_1238CFK_6S_TvsI.gif?m=1435758889 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK364034_1238CFK_6S_TvsS_csv.gif?m=1435758962 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK364034_1238CFK_6S_TvsS_csv.gif?m=1435758962 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK364034_1238CFK_6S_EvsT.gif?m=1435758914 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK364034_1238CFK_6S_EvsT.gif?m=1435758913 }} ]]


== MK3640/34 13" Prop 25V (6S) ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/MK364034_1342CFK_6S_TvsS.gif?m=1435758905 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK364034_1342CFK_6S_TvsS.gif?m=1435758905 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK364034_1342CFK_6S_TvsI.gif?m=1435758900 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK364034_1342CFK_6S_TvsI.gif?m=1435758900 }} ]]

 * This [[https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=75&products_id=749|Prop]]

== MK3640/34 14" Prop 25V (6S) ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/MK364034_1445CFK_6S_TvsS.gif?m=1435758896 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK364034_1445CFK_6S_TvsS.gif?m=1435758896 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK364034_1445CFK_6S_TvsI.gif?m=1435759497 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK364034_1445CFK_6S_TvsI.gif?m=1435759496 }} ]]

 * This [[https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=75&products_id=713|Prop]]

##include_3640end



= MK3638 =

{{ http://gallery3.mikrokopter.de/var/thumbs/intern/MK-Baugruppen/MK3638_V2/MK36385V2.jpg?m=1420559771 }}

'''Shoplink: [[https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=73&products_id=615|MK3638 V2]]'''

##include_3638_begin

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3538_characteristic_curve.gif?m=1409673363 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3538_characteristic_curve.gif?m=1410812398 }} ]]

== MK3638 16V (4S) 12" Carbon ==

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3638_4S_12Zoll_TvsI.gif?m=1418913043 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3638_4S_12Zoll_TvsI.gif?m=1418913044 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3638_4S_12Zoll_TvsS.gif?m=1418913053 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3638_4S_12Zoll_TvsS.gif?m=1418913054 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3638_4S_12Zoll_Efficiency.gif?m=1418913060 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3638_4S_12Zoll_Efficiency.gif?m=1418913060 }} ]]

 * This [[https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=75&products_id=836|Prop]]
 * This [[https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=73&products_id=615|Motor]]

== MK3638 4S 14" Carbon ==

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3638_4S_14x45_TvsS.gif?m=1436461393 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3638_4S_14x45_TvsS.gif?m=1436461394 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3638_4S_14x45_TvsI.gif?m=1436461385 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3638_4S_14x45_TvsI.gif?m=1436461385 }} ]]

== MK3638 4S 15" Carbon ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3638_4S_14x45_TvsS.gif?m=1436461393 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3638_4S_14x45_TvsS.gif?m=1436461394 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK3638_4S_14x45_TvsI.gif?m=1436461385 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK3638_4S_14x45_TvsI.gif?m=1436461385 }} ]]

##include_3638_end


= MK4008/350 6S 16" Carbon =

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK4008_350_6S_16_TvsI.png?m=1519988362 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK4008_350_6S_16_TvsI.png?m=1519988363 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK4008_350_6S_16_TvsS.png?m=1519988366 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK4008_350_6S_16_TvsS.png?m=1519988366 }} ]]


= MK4010/310 6S 16" Carbon =
[[ http://gallery3.mikrokopter.de/var/albums/tech/MK4010_310_1.png?m=1551258235 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK4010_310_1.png?m=1551258236 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MK4010_310_2.png?m=1551258240 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MK4010_310_2.png?m=1551258240 }} ]]

------
/!\ '''Motors/propellers that are basically working, see notice at top'''



= Altigator A5050 =
Successfuly Tested on BL V3 (Firmware 1.10)
== Altigator A5050 16x5 XOAR 4S ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/Altigator_A5050_4S_16x5_TvsI.gif?m=1413802701 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/Altigator_A5050_4S_16x5_TvsI.gif?m=1413802701 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/Altigator_A5050_4S_16x5_TvsS.gif?m=1413802706 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/Altigator_A5050_4S_16x5_TvsS.gif?m=1413802706 }} ]]



== Altigator A5050 16x6 XOAR 4S ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/Altigator_A5050_4S_16x6_TvsI.gif?m=1413802709 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/Altigator_A5050_4S_16x6_TvsI.gif?m=1413802710 }} ]]

= Hacker =
== Hacker A30-24M_UAV_680kV 13x6.5" 4S ==
Successfuly Tested on BL V3 (Firmware 1.10)

Timing: 28°

[[ http://gallery3.mikrokopter.de/var/albums/tech/Hacker_A30-24M_UAV_680kV_13x6_4S_TvsI.gif?m=1444893186 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/Hacker_A30-24M_UAV_680kV_13x6_4S_TvsI.gif?m=1444893186 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/Hacker_A30-24M_UAV_680kV_13x6_4S_TvsS.gif?m=1444893192 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/Hacker_A30-24M_UAV_680kV_13x6_4S_TvsS.gif?m=1444893192 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/Hacker_A30-24M_UAV_680kV_13x6_4S_EvsT.gif?m=1444893179 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/Hacker_A30-24M_UAV_680kV_13x6_4S_EvsT.gif?m=1444893179 }} ]]
Zeile 49: Zeile 243:
Tested on BL V3 (Firmware 1.10) Successfuly Tested on BL V3 (Firmware 1.10)

[[ http://gallery3.mikrokopter.de/var/resizes/tech/KDE3520XF_400kV_Eprop-01.jpg?m=1413884213 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/KDE3520XF_400kV_Eprop-01.jpg?m=1413884213 }} ]]
Zeile 67: Zeile 263:
Tested on BL V3 (Firmware 1.10) Successfuly Tested on BL V3 (Firmware 1.10)
Zeile 70: Zeile 267:

[[ http://gallery3.mikrokopter.de/var/albums/tech/KDE4012XF_400_16_6S_Graf_TvsS_csv.gif?m=1413800902 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/KDE4012XF_400_16_6S_Graf_TvsS_csv.gif?m=1413800902 }} ]]

== KDE4012XF_400 17" 6S ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/KDE4012XF_400_17_6S_Graf_TvsI.gif?m=1413801158 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/KDE4012XF_400_17_6S_Graf_TvsI.gif?m=1413801158 }} ]]

== KDE4012XF_400 18" 6S ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/KDE4012XF_400_18_6S_Graf_TvsI.gif?m=1413801161 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/KDE4012XF_400_18_6S_Graf_TvsI.gif?m=1413801162 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/KDE4012XF_400_18_6S_Graf_TvsS.gif?m=1413801167 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/KDE4012XF_400_18_6S_Graf_TvsS.gif?m=1413801167 }} ]]

= KDE4014XF/380 =
Successfuly Tested on BL V3 (Firmware 1.10)

[[ http://gallery3.mikrokopter.de/var/resizes/tech/KDE4014XF-380_18_6S_1.JPG?m=1413801490 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/KDE4014XF-380_18_6S_1.JPG?m=1413801490 }} ]]

== Compare to MK3644 ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/KDE4014_vs_MK3644.gif?m=1413801391 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/KDE4014_vs_MK3644.gif?m=1413801392 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/KDE4014XF-380_16_6S_graph_TvsI.gif?m=1413801396 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/KDE4014XF-380_16_6S_graph_TvsI.gif?m=1413801397 }} ]]

== KDE4014XF/380 16" 6S ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/KDE4014XF-380_16_6S_graph_TvsI.gif?m=1413801396 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/KDE4014XF-380_16_6S_graph_TvsI.gif?m=1413801397 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/KDE4014XF-380_16_6S_graph_TvsS.gif?m=1413801399 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/KDE4014XF-380_16_6S_graph_TvsS.gif?m=1413801400 }} ]]

== KDE4014XF/380 17" vs. 18" 6S ==

[[ http://gallery3.mikrokopter.de/var/albums/tech/KDE4014XF-380_17And18_6S_graph_TvsI_Compare.gif?m=1413801486 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/KDE4014XF-380_17And18_6S_graph_TvsI_Compare.gif?m=1413801486 }} ]]

== KDE4014XF/380 18" 6S ==

[[ http://gallery3.mikrokopter.de/var/albums/tech/KDE4014XF-380_18_6S_graph.gif?m=1413801494 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/KDE4014XF-380_18_6S_graph.gif?m=1413801494 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/KDE4014XF-380_18_6S_graph2.gif?m=1413801981 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/KDE4014XF-380_18_6S_graph2.gif?m=1413801981 }} ]]

= T-Motor U3 =
Successfuly Tested on BL V3 (Firmware 1.10)
== T-Motor U3/700 13" 4S ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/T-Motor_u3_700kv_4S_13x44_OktoBLV3_TvsS.png?m=1497604639 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/T-Motor_u3_700kv_4S_13x44_OktoBLV3_TvsS.png?m=1497604639 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/T-Motor_u3_700kv_4S_13x44_OktoBLV3_TvsI.png?m=1497604637 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/T-Motor_u3_700kv_4S_13x44_OktoBLV3_TvsI.png?m=1497604637 }} ]]

= T-Motor U5/400 =
Successfuly Tested on BL V3 (Firmware 1.10)
== T-Motor U5/400 16" ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/U5_16x55_6S-01.gif?m=1413802197 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U5_16x55_6S-01.gif?m=1413802197 }} ]]

== T-Motor U5/400 18" ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/U5_400_18_Critical2-01.gif?m=1413802206 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U5_400_18_Critical2-01.gif?m=1413802206 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/U5_400_18_Critical-01.gif?m=1413802201 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U5_400_18_Critical-01.gif?m=1413802201 }} ]]

Note: In combination of 18" and 6S Lipo, the motor starts to generate commutation problems at higher currents. We recommend to operate this motor max. with 17" or better with 16" Propellers

= T-Motor U7/490 =
Successfuly tested on BL V3 (Firmware 1.10)

The U7/490 runs perfectly on the BL V3, but we would recommend to select a lower rpm/V and run them on 6S.

== T-Motor U7/490 13" 6S ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_16x55_TvsS.gif?m=1413883146 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U7_490kV_4S_16x55_TvsS.gif?m=1413883146 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_6S_13_TvsS.gif?m=1413883153 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U7_490kV_6S_13_TvsS.gif?m=1413883154 }} ]]

== T-Motor U7/490 15x5,5" 4S ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_15x55_TvsI.gif?m=1413882881 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U7_490kV_4S_15x55_TvsI.gif?m=1413882881 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_15x55_TvsS.gif?m=1413882885 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U7_490kV_4S_15x55_TvsS.gif?m=1413882885 }} ]]

== T-Motor U7/490 16x5,5" 4S ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_16x55_TvsI.gif?m=1413882890 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U7_490kV_4S_16x55_TvsI.gif?m=1413882891 }} ]]

== T-Motor U7/490 17x5,8" 4S ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_17x58_TcsI.gif?m=1413883265 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U7_490kV_4S_17x58_TcsI.gif?m=1413883266 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_18_%2842ALimit%29_TvsS_csv.gif?m=1413883557 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U7_490kV_4S_18_%2842ALimit%29_TvsS_csv.gif?m=1413883557 }} ]]

== T-Motor U7/490 18" 4S ==
/!\ Note: the 490rpm/V in combination with 18" Prop results in overcurrent (higher that 45A)

'''BL-Firmware 1.06'''

[[ http://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_18_TvsI.gif?m=1413802446 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U7_490kV_4S_18_TvsI.gif?m=1413802447 }} ]]

'''BL-Firmware 1.10:'''

[[ http://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_18_TvsI_V1_10.gif?m=1413883274 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U7_490kV_4S_18_TvsI_V1_10.gif?m=1413883274 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_18_%2842ALimit%29_TvsS_csv.gif?m=1413883557 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U7_490kV_4S_18_%2842ALimit%29_TvsS_csv.gif?m=1413883557 }} ]]

= T-Motor U8 =
Successfuly tested on BL V3 (Firmware 1.10)

== T-Motor U8/135 28" 6S ==

[[ http://gallery3.mikrokopter.de/var/albums/tech/U8_28_135kV_6S_Test4_up_down.gif?m=1413802455 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U8_28_135kV_6S_Test4_up_down.gif?m=1413802456 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/U8_28_135kV_6S_TvsS.gif?m=1424422198 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U8_28_135kV_6S_TvsS.gif?m=1424422199 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/U8_28_135kV_6S.jpg?m=1413802451 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U8_28_135kV_6S.jpg?m=1413802451 }} ]]

== T-Motor U8/170 29"x9,5 6S ==

[[ http://gallery3.mikrokopter.de/var/albums/tech/U8_170kv_29x95_6S_TvsI.gif?m=1460025177 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U8_170kv_29x95_6S_TvsI.gif?m=1460025178 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/U8_170kv_29x95_6S_TvsS.gif?m=1460025191 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/U8_170kv_29x95_6S_TvsS.gif?m=1460025192 }} ]]

= T-Motor MN3510 =
== T-Motor MN3510/630kV 13x4,4 4S ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/NM3510_630kV_4S_13x44_OktoBLV3_TvsS.png?m=1497604633 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/NM3510_630kV_4S_13x44_OktoBLV3_TvsS.png?m=1497604634 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/NM3510_630kV_4S_13x44_OktoBLV3_TvsI.png?m=1497604630 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/NM3510_630kV_4S_13x44_OktoBLV3_TvsI.png?m=1497604631 }} ]]


= T-Motor MN4010 =
== T-Motor MN4010-9/580kV 13x4,4 4S ==
No Problem on Single BL-V3 and 4S Lipo

[[ http://gallery3.mikrokopter.de/var/albums/tech/T-Motor_MN4010-9_580kV_13x44_4S_TvsS.png?m=1511519245 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/T-Motor_MN4010-9_580kV_13x44_4S_TvsS.png?m=1511519245 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/T-Motor_MN4010-9_580kV_13x44_4S_TvsI.png?m=1511519242 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/T-Motor_MN4010-9_580kV_13x44_4S_TvsI.png?m=1511519242 }} ]]


== T-Motor MN4010-9/580kV 13x4,4 6S ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/T-Motor_MN4010-9_580kV_13x44_6S_TvsS.png?m=1511519238 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/T-Motor_MN4010-9_580kV_13x44_6S_TvsS.png?m=1511519239 }} ]]

/!\ Warning: Not compatible with 6S Lipo


= T-Motor MT2212 =
== T-Motor MT2212/1100kV 13x4,4 3S ==
[[ http://gallery3.mikrokopter.de/var/albums/tech/MT2212_1100kV_3S_10x5_TvsS.png?m=1497604628 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MT2212_1100kV_3S_10x5_TvsS.png?m=1497604628 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MT2212_1100kV_3S_10x5_TvsI.png?m=1497604625 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MT2212_1100kV_3S_10x5_TvsI.png?m=1497604625 }} ]]

= Scorpion =
== Scorpion MII4010-360kv 15x7 Wood ==

[[ http://gallery3.mikrokopter.de/var/albums/tech/Scorpion_MII4010-360kv_15x07Holz_TvsI.png?m=1487759903 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/Scorpion_MII4010-360kv_15x07Holz_TvsI.png?m=1487759903 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/Scorpion_MII4010-360kv_15x07Holz_TvsS_2.png?m=1487759900 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/Scorpion_MII4010-360kv_15x07Holz_TvsS_2.png?m=1487759900 }} ]]

== Scorpion MII4010-360kv 16x6 CFK ==

[[ http://gallery3.mikrokopter.de/var/albums/tech/Scorpion_MII4010-360kv_16x6CFK_TvsI.png?m=1487759907 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/Scorpion_MII4010-360kv_16x6CFK_TvsI.png?m=1487759907 }} ]]

== Scorpion MII4015-340kv 17x5 Wood ==

[[ http://gallery3.mikrokopter.de/var/albums/tech/Scorpion_MII4015-340kv_17x5Holz_TvsI.png?m=1487759913 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/Scorpion_MII4015-340kv_17x5Holz_TvsI.png?m=1487759913 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/Scorpion_MII4015-340kv_17x5Holz_TvsS_2.png?m=1487759896 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/Scorpion_MII4015-340kv_17x5Holz_TvsS_2.png?m=1487759897 }} ]]

== Scorpion MII4015-340kv 16x6 CFK ==

[[ http://gallery3.mikrokopter.de/var/albums/tech/Scorpion_MII4015-340kv_16x6CFK_TvsI.png?m=1487759910 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/Scorpion_MII4015-340kv_16x6CFK_TvsI.png?m=1487759910 }} ]]

= Plettenberg =
== Orbit 15-24 5S 15" ==

Successfuly tested on BL V3 (Firmware 1.10)
 
[[ http://gallery3.mikrokopter.de/var/albums/tech/Plettenberg_1524_5S_15x5CFK_Tvs_I.png?m=1489489900 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/Plettenberg_1524_5S_15x5CFK_Tvs_I.png?m=1489489900 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/Plettenberg_1524_5S_15x5CFK_Tvs_S.png?m=1489489903 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/Plettenberg_1524_5S_15x5CFK_Tvs_S.png?m=1489489903 }} ]]

= Maytech =
== Maytech 8626-160-MK ==

Successfuly tested on BL V3 (Firmware 1.10)

[[ http://gallery3.mikrokopter.de/tech/May8626-160-MK | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/May8626-160-MK.jpg?m=1436523813 }} ]]


== 8626-160-MK 6S 29x9,2" ==

[[ http://gallery3.mikrokopter.de/var/albums/tech/Maytech_8626-160-MK_6S_29x92_TvsS.gif?m=1436523798 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/Maytech_8626-160-MK_6S_29x92_TvsS.gif?m=1436523799 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/Maytech_8626-160-MK_6S_29x92_TvsI.gif?m=1436523794 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/Maytech_8626-160-MK_6S_29x92_TvsI.gif?m=1436523794 }} ]]


= Dualsky XM7010MR-7.5 =
Successfuly tested on BL V3 (Firmware 1.10)

== 20" Wood propeller ==

[[ http://gallery3.mikrokopter.de/var/albums/tech/MX7010MR75_20x6_6S_TvyI.gif?m=1436342384 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MX7010MR75_20x6_6S_TvyI.gif?m=1436342385 }} ]]

[[ http://gallery3.mikrokopter.de/var/albums/tech/MX7010MR75_20x6_6S.gif?m=1436342389 | {{ http://gallery3.mikrokopter.de/var/thumbs/tech/MX7010MR75_20x6_6S.gif?m=1436342389 }} ]]

-> this motor runs also fine with 18" prop

see also: FlugZeit FlightTime

Inhaltsverzeichnis

  1. Test setup
    1. Notice
    2. BL-Settings
  2. How to read the curves
    1. Example
    2. Flight time
  3. MK3644/24
    1. MK3644/24 12" Prop 25V
    2. MK3644/24 13" Prop 25V
    3. MK3644/24 14" Prop 25V
    4. MK3644/24 15" Prop 25V
    5. MK3644/24 16" Prop 25V
    6. MK3644/24 Propeller comparison
    7. MK3644/24 Thrust vs Setpoint
  4. MK3640
    1. MK3640/34 15" Prop 16V (4S)
    2. MK3640/34 12" Prop 25V (6S)
    3. MK3640/34 13" Prop 25V (6S)
    4. MK3640/34 14" Prop 25V (6S)
  5. MK3638
    1. MK3638 16V (4S) 12" Carbon
    2. MK3638 4S 14" Carbon
    3. MK3638 4S 15" Carbon
  6. MK4008/350 6S 16" Carbon
  7. MK4010/310 6S 16" Carbon
  8. Altigator A5050
    1. Altigator A5050 16x5 XOAR 4S
    2. Altigator A5050 16x6 XOAR 4S
  9. Hacker
    1. Hacker A30-24M_UAV_680kV 13x6.5" 4S
  10. KDE3520XF/400kV
    1. KDE3520XF/400kV 14x8" Eprop 6S
    2. KDE3520XF/400kV 15x5" 6S
    3. KDE3520XF/400kV 16x5,5" 6S
  11. KDE4012XF/400
    1. KDE4012XF_400 16" 6S
    2. KDE4012XF_400 17" 6S
    3. KDE4012XF_400 18" 6S
  12. KDE4014XF/380
    1. Compare to MK3644
    2. KDE4014XF/380 16" 6S
    3. KDE4014XF/380 17" vs. 18" 6S
    4. KDE4014XF/380 18" 6S
  13. T-Motor U3
    1. T-Motor U3/700 13" 4S
  14. T-Motor U5/400
    1. T-Motor U5/400 16"
    2. T-Motor U5/400 18"
  15. T-Motor U7/490
    1. T-Motor U7/490 13" 6S
    2. T-Motor U7/490 15x5,5" 4S
    3. T-Motor U7/490 16x5,5" 4S
    4. T-Motor U7/490 17x5,8" 4S
    5. T-Motor U7/490 18" 4S
  16. T-Motor U8
    1. T-Motor U8/135 28" 6S
    2. T-Motor U8/170 29"x9,5 6S
  17. T-Motor MN3510
    1. T-Motor MN3510/630kV 13x4,4 4S
  18. T-Motor MN4010
    1. T-Motor MN4010-9/580kV 13x4,4 4S
    2. T-Motor MN4010-9/580kV 13x4,4 6S
  19. T-Motor MT2212
    1. T-Motor MT2212/1100kV 13x4,4 3S
  20. Scorpion
    1. Scorpion MII4010-360kv 15x7 Wood
    2. Scorpion MII4010-360kv 16x6 CFK
    3. Scorpion MII4015-340kv 17x5 Wood
    4. Scorpion MII4015-340kv 16x6 CFK
  21. Plettenberg
    1. Orbit 15-24 5S 15"
  22. Maytech
    1. Maytech 8626-160-MK
    2. 8626-160-MK 6S 29x9,2"
  23. Dualsky XM7010MR-7.5
    1. 20" Wood propeller

Test setup

https://gallery3.mikrokopter.de/var/albums/tech/U8_28_135kV_6S.jpg?m=1413802451

https://gallery3.mikrokopter.de/var/albums/tech/KDE4014XF-380_18_6S_Ozkan.gif?m=1413802069

Notice

Here is a list of motors that are basically working with BL-Ctl V3. There is no warranty that, the BL-Ctl V3 is working with these motors/propellers under all conditions. We have only done extensive tests with the motors available in our shop. If you use other motors or propeller sizes, you do this on your own risk - no warranty.

BL-Settings

If not other noticed, these curves were recorded with:

  • 24° Timing
  • 20kHz

How to read the curves

With this curves it is easy to estimate the needed current and even estimate the flight-time.

  • please note that the unit of the currents are in the most graohs in 10mA - that means: 100 is 1A and 1000 is 10A

  • If there are courves Thrust vs. Setpoint -> 2550 = 100% -> 1270 = 50%

You can get the needed current for each needed thrust

Example

The total weight of a MikroKopter (4 Rotors) is 1400g -> so each motor needs a thrust of 350g for hovering (1400g / 4 = 350g)

http://gallery.mikrokopter.de/main.php/v/tech/MK3538_characteristic_curve_0-8A_howto.GIF.html

Current needed for 350g with the 13x6,5 APC - Propeller? -> 1,8A

Current needed for 350g with the 12x8 APC - Propeller? -> 2,4A

The total current for all four motors would be 7,2A (4 * 1,8A) or 9,6A (4 * 2,4A)

Flight time

You can estimate the flight time with this formular:

Time = 54 * Lipo / Current

(54 because we estimate 10% losses -> 60 * 0,9)

In case we would have a 3300 Lipo (3,3Ah), the Flight time for the 13x6,5 would be:

Time = 54 * 3,3 / 7,2 = 24,7 min

The same for the 12x8 Prop:

Time = 54 * 3,3 / 9,6 = 18,5 min

That is a different of 33% in flight time!

See also: FlugZeit

MK3644/24

Successfuly Tested on BL V3 (Firmware 1.10)

http://gallery.mikrokopter.de/main.php/v/tech/Montiert.jpg.html

MK3644/24 12" Prop 25V

https://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_12_TvsI_V1_10-01.gif?m=1424422678

https://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_12Zoll_V1_10_TvsS-01.gif?m=1424422693

https://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_12Zoll_V1_10_EvsT-01.gif?m=1424422686

MK3644/24 13" Prop 25V

https://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_13_TvsI_V1_10.gif?m=1412677181

MK3644/24 14" Prop 25V

https://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_14_TvsI_V1_10.gif?m=1412677155

MK3644/24 15" Prop 25V

https://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_15x5_TvsI_V1_10.gif?m=1412677170

https://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_15x5_TvsS.gif?m=1436440213

MK3644/24 16" Prop 25V

https://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_16_TvsI_V1_10.gif?m=1436345029

https://gallery3.mikrokopter.de/var/albums/tech/mk3644_6S_16_TvsS_V1_10.gif?m=1436345254

https://gallery3.mikrokopter.de/var/albums/tech/MK3644_14_16_Compare.gif?m=1436345023

MK3644/24 Propeller comparison

https://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_TvsI_Compare_12-15.gif?m=1412677197https://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_12_TvsI_PropCompare_0-10A.gif?m=1412677207

(full range and 0-10A range)

MK3644/24 Thrust vs Setpoint

https://gallery3.mikrokopter.de/var/albums/tech/MK3644_6S_12_TvsS_PropCompare.gif?m=1412678531

MK3640

https://gallery3.mikrokopter.de/var/resizes/tech/MK3640_5_1.jpg?m=1435759690

Shoplink

MK3640/34 15" Prop 16V (4S)

https://gallery3.mikrokopter.de/var/resizes/tech/MK3640_4S_15x5_TvsI.gif?m=1436513319

https://gallery3.mikrokopter.de/var/resizes/tech/MK3640_4S_15x5_TvsS.gif?m=1436513324

MK3640/34 12" Prop 25V (6S)

https://gallery3.mikrokopter.de/var/albums/tech/MK364034_1238CFK_6S_TvsI.gif?m=1435758890

https://gallery3.mikrokopter.de/var/albums/tech/MK364034_1238CFK_6S_TvsS_csv.gif?m=1435758962

https://gallery3.mikrokopter.de/var/albums/tech/MK364034_1238CFK_6S_EvsT.gif?m=1435758914

MK3640/34 13" Prop 25V (6S)

https://gallery3.mikrokopter.de/var/albums/tech/MK364034_1342CFK_6S_TvsS.gif?m=1435758905

https://gallery3.mikrokopter.de/var/albums/tech/MK364034_1342CFK_6S_TvsI.gif?m=1435758900

MK3640/34 14" Prop 25V (6S)

https://gallery3.mikrokopter.de/var/albums/tech/MK364034_1445CFK_6S_TvsS.gif?m=1435758896

https://gallery3.mikrokopter.de/var/albums/tech/MK364034_1445CFK_6S_TvsI.gif?m=1435759497

MK3638

https://gallery3.mikrokopter.de/var/thumbs/intern/MK-Baugruppen/MK3638_V2/MK36385V2.jpg?m=1420559771

Shoplink: MK3638 V2

https://gallery3.mikrokopter.de/var/albums/tech/MK3538_characteristic_curve.gif?m=1409673363

MK3638 16V (4S) 12" Carbon

https://gallery3.mikrokopter.de/var/albums/tech/MK3638_4S_12Zoll_TvsI.gif?m=1418913043

https://gallery3.mikrokopter.de/var/albums/tech/MK3638_4S_12Zoll_TvsS.gif?m=1418913053

https://gallery3.mikrokopter.de/var/albums/tech/MK3638_4S_12Zoll_Efficiency.gif?m=1418913060

MK3638 4S 14" Carbon

https://gallery3.mikrokopter.de/var/albums/tech/MK3638_4S_14x45_TvsS.gif?m=1436461393

https://gallery3.mikrokopter.de/var/albums/tech/MK3638_4S_14x45_TvsI.gif?m=1436461385

MK3638 4S 15" Carbon

https://gallery3.mikrokopter.de/var/albums/tech/MK3638_4S_14x45_TvsS.gif?m=1436461393

https://gallery3.mikrokopter.de/var/albums/tech/MK3638_4S_14x45_TvsI.gif?m=1436461385

MK4008/350 6S 16" Carbon

https://gallery3.mikrokopter.de/var/albums/tech/MK4008_350_6S_16_TvsI.png?m=1519988362

https://gallery3.mikrokopter.de/var/albums/tech/MK4008_350_6S_16_TvsS.png?m=1519988366

MK4010/310 6S 16" Carbon

https://gallery3.mikrokopter.de/var/albums/tech/MK4010_310_1.png?m=1551258235

https://gallery3.mikrokopter.de/var/albums/tech/MK4010_310_2.png?m=1551258240

/!\ Motors/propellers that are basically working, see notice at top

Altigator A5050

Successfuly Tested on BL V3 (Firmware 1.10)

Altigator A5050 16x5 XOAR 4S

https://gallery3.mikrokopter.de/var/albums/tech/Altigator_A5050_4S_16x5_TvsI.gif?m=1413802701

https://gallery3.mikrokopter.de/var/albums/tech/Altigator_A5050_4S_16x5_TvsS.gif?m=1413802706

Altigator A5050 16x6 XOAR 4S

https://gallery3.mikrokopter.de/var/albums/tech/Altigator_A5050_4S_16x6_TvsI.gif?m=1413802709

Hacker

Hacker A30-24M_UAV_680kV 13x6.5" 4S

Successfuly Tested on BL V3 (Firmware 1.10)

Timing: 28°

https://gallery3.mikrokopter.de/var/albums/tech/Hacker_A30-24M_UAV_680kV_13x6_4S_TvsI.gif?m=1444893186

https://gallery3.mikrokopter.de/var/albums/tech/Hacker_A30-24M_UAV_680kV_13x6_4S_TvsS.gif?m=1444893192

https://gallery3.mikrokopter.de/var/albums/tech/Hacker_A30-24M_UAV_680kV_13x6_4S_EvsT.gif?m=1444893179

KDE3520XF/400kV

Successfuly Tested on BL V3 (Firmware 1.10)

https://gallery3.mikrokopter.de/var/resizes/tech/KDE3520XF_400kV_Eprop-01.jpg?m=1413884213

KDE3520XF/400kV 14x8" Eprop 6S

https://gallery3.mikrokopter.de/var/albums/tech/KDE3520XF_400kV_14x8Eprop_6S_TvsI-01.gif?m=1413800269

https://gallery3.mikrokopter.de/var/albums/tech/KDE3520XF_400kV_14x8Eprop_6S_TvsS-01.gif?m=1413800277

https://gallery3.mikrokopter.de/var/albums/tech/KDE3520XF_400kV_14x8Eprop_6S_Effectivity-01.gif?m=1413800274

KDE3520XF/400kV 15x5" 6S

https://gallery3.mikrokopter.de/var/albums/tech/KDE3520XF_400kV_15x5_6S_TvsI.gif?m=1413800660

https://gallery3.mikrokopter.de/var/albums/tech/KDE3520XF_400kV_15x5_6S_TvsS.gif?m=1413800664

KDE3520XF/400kV 16x5,5" 6S

https://gallery3.mikrokopter.de/var/albums/tech/KDE3520XF_400kV_16x5_6S_TvsI.gif?m=1413800669

KDE4012XF/400

Successfuly Tested on BL V3 (Firmware 1.10)

KDE4012XF_400 16" 6S

https://gallery3.mikrokopter.de/var/albums/tech/KDE4012XF_400_16_6S_Graf_TvsI_csv.gif?m=1413800898

https://gallery3.mikrokopter.de/var/albums/tech/KDE4012XF_400_16_6S_Graf_TvsS_csv.gif?m=1413800902

KDE4012XF_400 17" 6S

https://gallery3.mikrokopter.de/var/albums/tech/KDE4012XF_400_17_6S_Graf_TvsI.gif?m=1413801158

KDE4012XF_400 18" 6S

https://gallery3.mikrokopter.de/var/albums/tech/KDE4012XF_400_18_6S_Graf_TvsI.gif?m=1413801161

https://gallery3.mikrokopter.de/var/albums/tech/KDE4012XF_400_18_6S_Graf_TvsS.gif?m=1413801167

KDE4014XF/380

Successfuly Tested on BL V3 (Firmware 1.10)

https://gallery3.mikrokopter.de/var/resizes/tech/KDE4014XF-380_18_6S_1.JPG?m=1413801490

Compare to MK3644

https://gallery3.mikrokopter.de/var/albums/tech/KDE4014_vs_MK3644.gif?m=1413801391

https://gallery3.mikrokopter.de/var/albums/tech/KDE4014XF-380_16_6S_graph_TvsI.gif?m=1413801396

KDE4014XF/380 16" 6S

https://gallery3.mikrokopter.de/var/albums/tech/KDE4014XF-380_16_6S_graph_TvsI.gif?m=1413801396

https://gallery3.mikrokopter.de/var/albums/tech/KDE4014XF-380_16_6S_graph_TvsS.gif?m=1413801399

KDE4014XF/380 17" vs. 18" 6S

https://gallery3.mikrokopter.de/var/albums/tech/KDE4014XF-380_17And18_6S_graph_TvsI_Compare.gif?m=1413801486

KDE4014XF/380 18" 6S

https://gallery3.mikrokopter.de/var/albums/tech/KDE4014XF-380_18_6S_graph.gif?m=1413801494

https://gallery3.mikrokopter.de/var/albums/tech/KDE4014XF-380_18_6S_graph2.gif?m=1413801981

T-Motor U3

Successfuly Tested on BL V3 (Firmware 1.10)

T-Motor U3/700 13" 4S

https://gallery3.mikrokopter.de/var/albums/tech/T-Motor_u3_700kv_4S_13x44_OktoBLV3_TvsS.png?m=1497604639

https://gallery3.mikrokopter.de/var/albums/tech/T-Motor_u3_700kv_4S_13x44_OktoBLV3_TvsI.png?m=1497604637

T-Motor U5/400

Successfuly Tested on BL V3 (Firmware 1.10)

T-Motor U5/400 16"

https://gallery3.mikrokopter.de/var/albums/tech/U5_16x55_6S-01.gif?m=1413802197

T-Motor U5/400 18"

https://gallery3.mikrokopter.de/var/albums/tech/U5_400_18_Critical2-01.gif?m=1413802206

https://gallery3.mikrokopter.de/var/albums/tech/U5_400_18_Critical-01.gif?m=1413802201

Note: In combination of 18" and 6S Lipo, the motor starts to generate commutation problems at higher currents. We recommend to operate this motor max. with 17" or better with 16" Propellers

T-Motor U7/490

Successfuly tested on BL V3 (Firmware 1.10)

The U7/490 runs perfectly on the BL V3, but we would recommend to select a lower rpm/V and run them on 6S.

T-Motor U7/490 13" 6S

https://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_16x55_TvsS.gif?m=1413883146

https://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_6S_13_TvsS.gif?m=1413883153

T-Motor U7/490 15x5,5" 4S

https://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_15x55_TvsI.gif?m=1413882881

https://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_15x55_TvsS.gif?m=1413882885

T-Motor U7/490 16x5,5" 4S

https://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_16x55_TvsI.gif?m=1413882890

T-Motor U7/490 17x5,8" 4S

https://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_17x58_TcsI.gif?m=1413883265

https://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_18_%2842ALimit%29_TvsS_csv.gif?m=1413883557

T-Motor U7/490 18" 4S

/!\ Note: the 490rpm/V in combination with 18" Prop results in overcurrent (higher that 45A)

BL-Firmware 1.06

https://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_18_TvsI.gif?m=1413802446

BL-Firmware 1.10:

https://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_18_TvsI_V1_10.gif?m=1413883274

https://gallery3.mikrokopter.de/var/albums/tech/U7_490kV_4S_18_%2842ALimit%29_TvsS_csv.gif?m=1413883557

T-Motor U8

Successfuly tested on BL V3 (Firmware 1.10)

T-Motor U8/135 28" 6S

https://gallery3.mikrokopter.de/var/albums/tech/U8_28_135kV_6S_Test4_up_down.gif?m=1413802455

https://gallery3.mikrokopter.de/var/albums/tech/U8_28_135kV_6S_TvsS.gif?m=1424422198

https://gallery3.mikrokopter.de/var/albums/tech/U8_28_135kV_6S.jpg?m=1413802451

T-Motor U8/170 29"x9,5 6S

https://gallery3.mikrokopter.de/var/albums/tech/U8_170kv_29x95_6S_TvsI.gif?m=1460025177

https://gallery3.mikrokopter.de/var/albums/tech/U8_170kv_29x95_6S_TvsS.gif?m=1460025191

T-Motor MN3510

T-Motor MN3510/630kV 13x4,4 4S

https://gallery3.mikrokopter.de/var/albums/tech/NM3510_630kV_4S_13x44_OktoBLV3_TvsS.png?m=1497604633

https://gallery3.mikrokopter.de/var/albums/tech/NM3510_630kV_4S_13x44_OktoBLV3_TvsI.png?m=1497604630

T-Motor MN4010

T-Motor MN4010-9/580kV 13x4,4 4S

No Problem on Single BL-V3 and 4S Lipo

https://gallery3.mikrokopter.de/var/albums/tech/T-Motor_MN4010-9_580kV_13x44_4S_TvsS.png?m=1511519245

https://gallery3.mikrokopter.de/var/albums/tech/T-Motor_MN4010-9_580kV_13x44_4S_TvsI.png?m=1511519242

T-Motor MN4010-9/580kV 13x4,4 6S

https://gallery3.mikrokopter.de/var/albums/tech/T-Motor_MN4010-9_580kV_13x44_6S_TvsS.png?m=1511519238

/!\ Warning: Not compatible with 6S Lipo

T-Motor MT2212

T-Motor MT2212/1100kV 13x4,4 3S

https://gallery3.mikrokopter.de/var/albums/tech/MT2212_1100kV_3S_10x5_TvsS.png?m=1497604628

https://gallery3.mikrokopter.de/var/albums/tech/MT2212_1100kV_3S_10x5_TvsI.png?m=1497604625

Scorpion

Scorpion MII4010-360kv 15x7 Wood

https://gallery3.mikrokopter.de/var/albums/tech/Scorpion_MII4010-360kv_15x07Holz_TvsI.png?m=1487759903

https://gallery3.mikrokopter.de/var/albums/tech/Scorpion_MII4010-360kv_15x07Holz_TvsS_2.png?m=1487759900

Scorpion MII4010-360kv 16x6 CFK

https://gallery3.mikrokopter.de/var/albums/tech/Scorpion_MII4010-360kv_16x6CFK_TvsI.png?m=1487759907

Scorpion MII4015-340kv 17x5 Wood

https://gallery3.mikrokopter.de/var/albums/tech/Scorpion_MII4015-340kv_17x5Holz_TvsI.png?m=1487759913

https://gallery3.mikrokopter.de/var/albums/tech/Scorpion_MII4015-340kv_17x5Holz_TvsS_2.png?m=1487759896

Scorpion MII4015-340kv 16x6 CFK

https://gallery3.mikrokopter.de/var/albums/tech/Scorpion_MII4015-340kv_16x6CFK_TvsI.png?m=1487759910

Plettenberg

Orbit 15-24 5S 15"

Successfuly tested on BL V3 (Firmware 1.10)

https://gallery3.mikrokopter.de/var/albums/tech/Plettenberg_1524_5S_15x5CFK_Tvs_I.png?m=1489489900

https://gallery3.mikrokopter.de/var/albums/tech/Plettenberg_1524_5S_15x5CFK_Tvs_S.png?m=1489489903

Maytech

Maytech 8626-160-MK

Successfuly tested on BL V3 (Firmware 1.10)

https://gallery3.mikrokopter.de/tech/May8626-160-MK

8626-160-MK 6S 29x9,2"

https://gallery3.mikrokopter.de/var/albums/tech/Maytech_8626-160-MK_6S_29x92_TvsS.gif?m=1436523798

https://gallery3.mikrokopter.de/var/albums/tech/Maytech_8626-160-MK_6S_29x92_TvsI.gif?m=1436523794

Dualsky XM7010MR-7.5

Successfuly tested on BL V3 (Firmware 1.10)

20" Wood propeller

https://gallery3.mikrokopter.de/var/albums/tech/MX7010MR75_20x6_6S_TvyI.gif?m=1436342384

https://gallery3.mikrokopter.de/var/albums/tech/MX7010MR75_20x6_6S.gif?m=1436342389

-> this motor runs also fine with 18" prop