Mini-4

http://mikrokopter.de/images/deu.gif Seite in deutsch http://mikrokopter.de/images/fra.gif Page en français

Inhaltsverzeichnis

  1. Mini power distributor
    1. Connections
  2. Wiring
    1. Switch

Mini power distributor

With this small PCB it is very easy to realize the distribution. The Cables don't have to soldered directly to the FlightControl

Shop-Link

http://gallery.mikrokopter.de/main.php/v/tech/MiniVerteiler.jpg.html

http://gallery.mikrokopter.de/main.php/v/tech/MiniVerteiler3.jpg.html

Connections

  • GND - five solder pads
  • Plus - five solder pads
  • D (I2C)
  • C (I2C)
  • 'S' = Buzzer

http://gallery.mikrokopter.de/main.php/v/tech/MiniVerteiler2.jpg.html

Wiring


http://mc.mikrocontroller.com/images/kopter/verdrahtung1.gif
See also: Connections

http://gallery.mikrokopter.de/main.php/v/tech/MiniVerteiler_connect3.jpg.html

http://gallery.mikrokopter.de/main.php/v/tech/MiniVerteiler_connect2.jpg.html

Switch

If the FC is connected via the molex-cable, the switch on the FC can't be used. The FC is powered up when the supply is connected to the MiniPowerDistribution


KategorieHardware