Mini8 Distribution PCB

Size: 34 * 27mm

• Shop link (ready)

• Shop link (for self soldering)

Connection I2C-Bus

The I2C-Connection is done by 3-lines molex-cables. There are different length available in the MK-Shop

• Shoplink cable 25cm

• Shoplink cable 11cm

Power connection

• Plus (+) and Minus (-) are marked on the PCB

• The FlightControl is connected via the 5-lines Molex and doesn't need further power connection.

Twist the power lines to the BLCs to avoid magetic disturbtions

Connection buzzer

The buzzer can be connected to the board also:

it could be nessecary to place the buzzer with a bigger distance to the compass on the NC.

complete connection

Here you can see the complete connection of an oktokopter:

(only the motors are missing)