Mini8 Distribution PCB
Size: 34 * 27mm
Connection I2C-Bus
The I2C-Connection is done by 3-lines molex-cables. There are different length available in the MK-Shop
Power connection
- Plus (+) and Minus (-) are marked on the PCB
The FlightControl is connected via the 5-lines Molex and doesn't need further power connection.
Twist the power lines to the BLCs to avoid magetic disturbtions
Connection buzzer
The buzzer can be connected to the board also:
it could be nessecary to place the buzzer with a bigger distance to the compass on the NC.
complete connection
Here you can see the complete connection of an oktokopter:
(only the motors are missing)