#acl AdminGroup:read,write,revert EditorsGroup:read,write,revert All:read ########################################################################### ||This page as an '''PDF-Document'''? Click on that Symbol and wait a little moment... ---> ||<>|| [[Lizenz|{{attachment:symbols/Flagge_EN.jpg}}]]|| ########################################################################### {{{#!wiki MK_Nav ||License|| }}} ########################################################################### <
> ##///////////////////////////////////////////////////////////////////////// ## Bild rechts {{{#!html
}}} {{ http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Button-Baugruppe/Button350x150/Button_lICENSE.jpg?m=1519991983 }} <
> '''Shoplink: [[https://www.mikrocontroller.com/index.php?main_page=index&cPath=119|License]]''' {{{#!html
}}} ##///////////////////////////////////////////////////////////////////////// ########################################################################### <
> <> <
><
> ########################################################################### <
><
><
><
> = License info = The license is linked to the used hardware. The basic requirement is the "Standard license". For an extension the "standard license" plus extension is needed. {{{{#!wiki important <
> With the license and the extensions an autonomous flight is possible. <
> Please note: in some countries it is not allowed to fly autonomously and/or autonomously out of sight!<
> Information about flight -bans / -rules is provided by the flight authority responsible for your flight location. }}}} ############################################################################## <
><
><
><
> = Standard license 1000m = ##///////////////////////////////////////////////////////////////////////// {{{#!html
}}} {{ http://gallery3.mikrokopter.de/var/thumbs/intern/sonstiges/Lizenz/Lizenz_Button_180x180_License.jpg?m=1521717415 }} {{{#!html
}}} ##///////////////////////////////////////////////////////////////////////// <
> With this "Standard license" the following functions are possible: * Commercial use of flight control / software is allowed * Range for autonomous GPS navigation is increased to 1000m around the starting point<
>~-(without license max. 250m aroung the starting point)-~ * Up to 100 waypoints for waypoint flight / navigation possible<
>~-(up to 200 waypoints in map planning)-~ * Save up to 99 SinglePoints and/or Fix-/Relativ-list in your copter (SD-card) and load them via transmitter * Function "DESCEND_RANGE" with adjustable range enabled<
>~-(a forced landing is possible if the copter moves too far around the starting point)-~ ############################################################################## <
><
><
><
> = Extension - GPS Range plus 1000m = ##///////////////////////////////////////////////////////////////////////// {{{#!html
}}} {{ http://gallery3.mikrokopter.de/var/thumbs/intern/sonstiges/Lizenz/Lizenz_Button_180x180_MoreRange.jpg?m=1521717415 }} {{{#!html
}}} ##///////////////////////////////////////////////////////////////////////// <
> With this "Extension" the following functions are possible: * Extension of the "Standard license" range by another 1000m With this extension, the range for autonomous GPS navigation can be <
> increased up to 7000m around the starting point. If you want to extend the "Standard License" to 2000m, you need this extension 1x. <
> For an extension to 7000m you need this license 6x.<
> ~-("Standard license 1000m + 6x extension 1000m => 7000m)-~ <
><
><
><
> Please note: <
> With this extension, waypoints can be set outside the remote control range.<
> If you lost the connection beween transmitter/receiver during flight, the function "FailSafe" is automatically activated and the copter is flying back to the start position. <
> If you want to continue the waypoint flight despite loss of reception, the extension "[[#IgnoreRcLost|Ignore RC Lost]]" must be purchased additionally. Please note here the information in the [[#IgnoreRcLost|info box]]. ############################################################################## <
><
><
><
> = Extension - GPS Range unlimited = ##///////////////////////////////////////////////////////////////////////// {{{#!html
}}} {{ http://gallery3.mikrokopter.de/var/thumbs/intern/sonstiges/Lizenz/Lizenz_Button_180x180_NoRangeLimit.jpg?m=1521717416 }} {{{#!html
}}} ##///////////////////////////////////////////////////////////////////////// <
> With this "Extension" the following functions are possible: * Extension of the "Standard License" range to "Unlimited" With this extension, the range for an autonomous GPS navigation can be used indefinitely.<
> So you can fly waypoints in any set range. <
><
><
><
><
><
> Please note: <
> With this extension, waypoints can be set outside the remote control range.<
> If you lost the connection beween transmitter/receiver during flight, the function "FailSafe" is automatically activated and the copter is flying back to the start position. <
> If you want to continue the waypoint flight despite loss of reception, the extension "[[#IgnoreRcLost|Ignore RC Lost]]" must be purchased additionally. Please note here the information in the [[#IgnoreRcLost|info box]]. ############################################################################## <
><
><
><
> <> = Extension - Ignore RC Lost = ##///////////////////////////////////////////////////////////////////////// {{{{#!wiki important <
> Use this feature only with great care !!! In the event of a reception failure, a waypoint flight will continue. In this case, __NO__ intervention via the remote control is possible !!! Plan for a waypoint flight emergency landing points along the route.<
> ~-(e.g. for emergency landing in case of undervoltage)-~ Please check the legal requirements, if such a function / a fully autonomous flight at the place of flight is allowed! }}}} {{{#!html
}}} {{ http://gallery3.mikrokopter.de/var/thumbs/intern/sonstiges/Lizenz/Lizenz_Button_180x180_IgnoreRcLost.jpg?m=1521717414 }} {{{#!html
}}} ##///////////////////////////////////////////////////////////////////////// <
> With this "Extension" the following functions are possible: * With this extension the copter ignore a receiving failure during a waypoint flight During a waypoint flight and if a receiving failure happen, the flight will be continued If you fly manually (with or without GPS) and a receiving failure happen, the function FailSafe will automatically run. ############################################################################## <
><
><
><
> = Extension - Parachute sensor input = ##///////////////////////////////////////////////////////////////////////// {{{#!html
}}} {{ http://gallery3.mikrokopter.de/var/thumbs/intern/sonstiges/Lizenz/Lizenz_Button_180x180_Parachute.jpg?m=1521717432 }} {{{#!html
}}} ##///////////////////////////////////////////////////////////////////////// <
> With this "Extension" the following functions are possible: * immediate engine stop during parachute activation<
>~-(Parachute contact or emergency button must be connected to the "IO1" contact on your !FlightCtrl V3)-~ This feature is designed for use with a parachute. <
> In this case, either a closing contact from the parachute or an external radio-controlled closing contact is required. Connect this contact with the "IO1" contact of your !FlightCtrl V3. In addition, the function must be activated on the SD card ~-(Settings.ini -> IO1_FUNCTION = 9)-~.<
> When the switch input is activated, the motors are immediately stopped to prevent damage to the parachute. ############################################################################## <
><
><
><
> = Extension - OEM Name = ##///////////////////////////////////////////////////////////////////////// {{{#!html
}}} {{ http://gallery3.mikrokopter.de/var/thumbs/intern/sonstiges/Lizenz/Lizenz_Button_180x180_OEM.jpg?m=1521717417 }} {{{#!html
}}} ##///////////////////////////////////////////////////////////////////////// <
> With this "Extension" the following functions are possible: * Display your own (company-)name With this extension the own name can be displayed in the telemetry and !KopterTool (instead of !MikroKopter). <
> [[ http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Lizenz/MC-26_OEM.jpg?m=1521717441 | {{ http://gallery3.mikrokopter.de/var/thumbs/intern/sonstiges/Lizenz/MC-26_OEM.jpg?m=1521717441 }} ]] [[ http://gallery3.mikrokopter.de/var/albums/intern/sonstiges/Lizenz/KopterTool_OEM.jpg?m=1521717433 | {{ http://gallery3.mikrokopter.de/var/thumbs/intern/sonstiges/Lizenz/KopterTool_OEM.jpg?m=1521717433 }} ]] ############################################################################## <
><
><
><
> = Extension - Lib-Link = ##///////////////////////////////////////////////////////////////////////// {{{#!html
}}} {{ http://gallery3.mikrokopter.de/var/thumbs/intern/sonstiges/Lizenz/Lizenz_Button_180x180_Lib-Link.jpg?m=1521717414 }} {{{#!html
}}} ##///////////////////////////////////////////////////////////////////////// <
> With this "Extension" the following functions are possible: * Programming / compiling own software for the !NaviCtrl This extension is for programmers with "C" knowledge.<
> If you would like to make your own extensions to the NaviCtrl firmware, you will need a special library. <
> This library contains third-party property rights and other non-public parts of the firmware. ##############################################################################