||This page as a '''PDF-Document'''? Simply click on the symbol and wait a few seconds... ---> ||<>|| {{{#!wiki MK_Nav ||||||HoTT - Update|| }}} {{{#!wiki MK_select1 * {{http://mikrokopter.de/images/deu.gif}} [[HottUpdate|deutsch]] }}} <
><
> See also: [[en/HoTT|HoTT]] <
><
> <> #################################################################################################################################################################################################### <
><
><
><
> <> = Software for the Update = The necessary software '''V4''' for the Graupner Transmitter/Receiver as well as the necessary language files you can download direct from the Graupner Homepage. <
> Important for the update is that you choose the correct file. Each software file has the appropriate number in the file name.<
> '''EXAMPLE:''' The receiver GR-16 (No.'''33508''') becomes the Update-File "'''33508'''_gr_rx8_4a90_f9.bin" == Voice file == The !MikroKopter needs a !MikroKopter-specific voice-file for the HoTT-Transmitter. The name for e.g. the english File is ''English_Mikrokopter_V2.vdf''.<
> There some speech-samples are substituted by MikroKopter-specific samples.<
> If you would use the old file, the Transmitter would speak "maximum voltage" instead of "Calibrating".<
><
> You can download the voice file directly from Graupner. It is include the Software package you can download there for your transmitter. #################################################################################################################################################################################################### <
><
> = Update the transmitter = In order to provide the latest software to the transmitter you have two opportunities: <
><
> * Either way you use a Micro-SD-Card which can be insert into the transmitter to download the needed software into the transmitter. * Or - the transmitter will be connected via an USB-cable to the PC. Via the Graupner Program "grStudio" you can download the new software. <
><
> '''INFO: An update of the transmitter via a Micro-SD-Card is only possible since "V4"! <
> Transmitter with the firmware "V3" need to download the new firmware via the program "grStudio".'''<
><
> == Video == <> #################################################################################################################################################################################################### <
><
><
><
> = Update transmitter - Opportunity 1: Micro-SD-Card = The needed files you can copy in an appropriate folder on the Micro-SD-Card. <
> This Micro-SD-Card you insert into the transmitter and import the software via the "Hidden Mode".<
> (Actual instructions => MX-20 = page 22+28 / MC-32 = page 23+32).<
><
> == Prepare Micro-SD-Card == To import the software via the Micro-SD-Card there must be certain directories on the Micro-SD-Card.<
> The necessary directories (folder) can be done automatically from the transmitter to the Micro-SD-Karte.<
><
> For that you need to: * open the battery box from the transmitter and * insert an empty Micro-SD-Card into the den Micro-SD-Card-Slot. * Now you switch ON the transmitter. * After the complete boot of the transmitter you can switch the transmitter OFF. * Remove the Micro-SD-Card. <
><
> Now you can insert the Micro-SD-Card into an appropriate slot at your PC.<
> Here you will find now the following directories: <
><
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=112980&g2_serialNumber=4}}<
><
> If you have downloaded the needed firmware or language files you can copy them now into the appropriate folder on the Micro-SD-Card.<
><
> Here i.e. you copy the needed firmware file for the MX-20 in English (mx-20_1v119_English.bin) into the folder '''''Firmware''''' on the Micro-SD-Card.<
><
> == The Update via Micro-SD-Card == If you have prepared the Micro-SD-Card in that way you continue as follows: <
> (Example: Fimware Update)<
><
> 1. Insert Micro-SD-Card into the transmitter. 1. Switch ON the transmitter. 1. With the key combination "left Touch-Pad '''UP/DOWN''' and the "Right Touch-Pad '''SET'''" (press to the same time) you will get into the menu '''''Hidden Mode'''''. {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113036&g2_serialNumber=2}}<
><
> 1. In the menu "Hidden Mode" you need to select the entry "FIRMWARE UPDATE". {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113223&g2_serialNumber=2}}<
><
> 1. Now you can choose the needed Firmware. {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113229&g2_serialNumber=2}}<
><
> 1. After confirming with '''SET''' the firmware will be installed. {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113060&g2_serialNumber=2}} <
><
> After a successful installation the transmitter will boot new and you can use now the transmitter.<
><
> If you want to install a language file into your transmitter you do it in the same way. But - you need to select '''''VOICE TRIG''''' under Point 4. #################################################################################################################################################################################################### <
><
><
><
> = Update transmitter - Opportunity 2: Program grStudio = {{{{#!wiki important '''INFO''' To update the transmitter with the program '''Firmware_Upgrade_grStudio_Ver-X.X.exe''' you must install the COM-Port Driver '''CP210x - Silicon Labs''' before!<
> This driver you can download directly from the homepage of Graupner. If you download there the current "V4" you will find the driver in the folder "USB Driver".<
> (Instruction => MX-20 page 39 / MC-32 page 44) }}}} <
><
><
><
> == Update via grStudio == To update the transmitter with the program '''Firmware_Upgrade_grStudio_Ver-X.X.exe''' you need to continue in that way: <
><
> 1. Connect the USB-cable with the transmitter and the PC and switch your transmitter ON. ||{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113020&g2_serialNumber=2}}||{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113026&g2_serialNumber=2}}|| ||Example: MX-20||Example: MC-32|| 1. Open program '''Firmware_Upgrade_grStudio_Ver-X.X.exe''' and select the COM-Port for the '''CP210x - Silicon Labs'''.<
><
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113061&g2_serialNumber=1}} {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113064&g2_serialNumber=1}}<
><
> 1. Now you select under '''Transmitter''' the ''' Firmware Upgrade'''.<
><
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=112990&g2_serialNumber=2}}<
><
> 1. Via the button '''File Browse''' you select the appropriate Firmware.<
><
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=112996&g2_serialNumber=2}}<
><
> 1. Now you can start the update via the button '''Download Start'''. 1. It appears here now an information window which will be confirmed after reading. <
><
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113001&g2_serialNumber=2}}<
><
> 1. Now the update is in process.<
><
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113006&g2_serialNumber=2}}<
><
> 1. The update will be also displayed on your transmitter.<
><
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113032&g2_serialNumber=2}}<
><
> 1. After a successful installation the transmitter will boot new and you can use now the transmitter.<
><
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113008&g2_serialNumber=1}}<
><
><
><
> == Blue screen == /!\ If the update was unsuccessful and you will see only an empty illuminated display you need to download the Bootloader and the Software again. <
> In the Graupner Program "Firmware_Upgrade_grStudio_Ver-x.x.exe" is help provided in the left menu bar under '''Transmitter''' and '''Emergency'''.<
> The download of the software ist pretty much similar to the Update. * Select with the button '''File Browse''' the necessary Firmware. * Start with the button ''' Download Start''' the recovery of the transmitter. * Switch ON the transmitter (if the transmitter will not switch ON - just disconnect the battery on time).<
><
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113071&g2_serialNumber=2}} {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113014&g2_serialNumber=2}} #################################################################################################################################################################################################### <
><
><
><
> = Update Receiver with the Program grStudio = If you want to make an Firmware-Update with your receiver you can do it either way via the Graupner "USB-Adapter" or the !FlightControl.<
><
> If you want to do the Update via the !FlightCtrl there __must__ be a software version installed V0.86 or higher.<
><
> '''__IMPORTANT__:''' Updating via the !FlightCtrl the MK-USB __must__ be connected __direct__ to the !FlightCtrl (not via the Navi!).<
> The Graupner receiver is here as usual connected to the !FlightCtrl via the PPM-cable and also the telemetry cable.<
><
> ||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=105430&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=105433&g2_serialNumber=2}}]]|| ||(Example image) To enlarge -> Click on the image|| #################################################################################################################################################################################################### <
><
><
><
> == Download the required software == Before you can start the Update on your receiver you need to download the appropriate "Update-File".<
><
> Infos you will find under: '''[[#Software|Software for the Update]]''' #################################################################################################################################################################################################### <
><
><
><
> == Bring FlightCtrl into Update-Mode == The following requirements must be met: <
> * The jumper "JET" on the Flight is closed. <
> * The cable for the telemetry is soldered on the "RX" Pad . * The !FlightCtrl is __direct__ connected with the MK-USB and supplied with voltage.<
><
> In the KopterTool open via the button '''Firmware Update & Terminal...''' the terminal window.<
> '''__ATTENTION__:''' As a receiver type you __must__ have already selected "HoTT" in the Koptertool (menu channels).<
><
> In the Terminal window click with the __right__ mouse button on the gray area next to the Update-button. <
> The Kontext-Menu will open. Here you need to select "Activate HoTT update mode..." aus.<
><
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113195&g2_serialNumber=2}}<
><
> After you "clicked" '''''Activate HoTT update mode...''''' a note window will appear: <
><
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113203&g2_serialNumber=1}}<
><
> After you confirmed the note window the !KopterTool will close and a data channel to the HoTT receiver will open to the same time.<
><
> '''__IMPORTANT__:''' At the receiver only the three-wire-PPM cabl will be disconnected ('''the one-wire cable has to be connected''').<
><
> #################################################################################################################################################################################################### <
><
><
><
> == Update of the receiver via Graupner Tool == To update now the receiver you can open the program '''Firmware_Upgrade_grStudio_Ver-X.X.exe'''. You do that as follows: <
><
> 1. Open program '''Firmware_Upgrade_grStudio_Ver-X.X.exe''' and select under "Device" the entry '''HoTT Receiver'''.<
><
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113134&g2_serialNumber=2}}<
><
> 1. Via the button '''File Browse''' you select the appropriate Firmware for the receiver. . For GR-12 i.e. the file '''33506_gr_rx6_amp_XaXX_e9.bin''' . For GR-16 i.e. the file '''33508_gr_rx8_XaXX_f9.bin''' . For GR-24 i.e. the file '''33512_gr_rx12_XaXX_bf.bin]]''' . (XaXX => Version number)<
><
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113139&g2_serialNumber=2}}<
> (Example: Software for the receiver GR-16)<
><
> 1. Now you can start the update via the button '''Download Start'''. <
><
> 1. Direct after you have clicked the button '''Download Start''' you need to press __and__ hold the '''SET'''-button on the receiver and you connect the PPM-cable also to the same time.<
><
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113144&g2_serialNumber=4}}<
><
> 1. If the receiver will be detected the update will start automatically.<
> (If it will not work the first time - back to step 3)<
><
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113148&g2_serialNumber=2}}<
><
> 1. After a successful update the following info window appears: <
><
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113151&g2_serialNumber=1}}<
><
> . '''__IMPORTANT__:''' After the receiver has been initialized, as descibed in the info window, the PPM-sum-signal need to be set new via your transmitter.<
><
>