|
Größe: 324
Kommentar:
|
Größe: 980
Kommentar:
|
| Gelöschter Text ist auf diese Art markiert. | Hinzugefügter Text ist auf diese Art markiert. |
| Zeile 1: | Zeile 1: |
| Hier kann die Kategorie beschrieben werden. | = Frame building = |
| Zeile 3: | Zeile 3: |
| Um eine Seite in diese Kategorie aufzunehmen, einfach einen Link auf diese Seite am Ende der entsprechenden Seite plazieren. | Here you can show your frame construction or publish tips to build a frame: . . |
| Zeile 5: | Zeile 5: |
| = Seiten der Kateorie KategorieName = [[FullSearch(regex:(----(-*)(\r)?\n)(.*)en/Frame-building)]] |
* Frame construction with Centerplate * ["MK-40-Rahmen"] (40cm shaft distance, Roxxy 2824-34, EPP1045 10") * ["MK-30-Rahmen"] Alu and insertable with CFK (30cm shaft distance, Roxxy 2815, X-Ufo-Props 8") * ["CFK-Rohr-Rahmen"] CFK pipe with Alu-square covers, adjustable length, inner cable wiring possible * [:TypischeGewichte:Typical weight] used materials * HighKopter.de - Frames When using Alu-square profile, drilling should be made from both sides. While drilling from one side through the whole profile, the drill will drift away. Resulting in holes not exactly in front of each other Don't forget: shaft distance is related to the diagonal distance, the distance between the motors is 1/sqr2 = 0.7 Valuable suggestions can be found at [:KategorieNachbauten:Mikrokopter Nachbauten] of other pilots |
| Zeile 9: | Zeile 20: |
| KategorieKategorie KategorieAnleitung | KategorieAnleitung KategorieEnglish |
Frame building
Here you can show your frame construction or publish tips to build a frame: . .
- Frame construction with Centerplate
- ["MK-40-Rahmen"] (40cm shaft distance, Roxxy 2824-34, EPP1045 10")
- ["MK-30-Rahmen"] Alu and insertable with CFK (30cm shaft distance, Roxxy 2815, X-Ufo-Props 8")
- ["CFK-Rohr-Rahmen"] CFK pipe with Alu-square covers, adjustable length, inner cable wiring possible
[:TypischeGewichte:Typical weight] used materials
HighKopter.de - Frames
When using Alu-square profile, drilling should be made from both sides. While drilling from one side through the whole profile, the drill will drift away. Resulting in holes not exactly in front of each other
Don't forget: shaft distance is related to the diagonal distance, the distance between the motors is 1/sqr2 = 0.7
Valuable suggestions can be found at [:KategorieNachbauten:Mikrokopter Nachbauten] of other pilots