#acl AdminGroup:read,write,revert EditorsGroup:read,write,revert All:read ||This page as a '''PDF-Document'''? Click on the symbol and wait a few seconds... ---> ||<>|| {{{#!wiki MK_Nav ||||||Jeti DS-16|| }}} {{{#!wiki MK_select1 * {{http://mikrokopter.de/images/deu.gif}} [[DS-16|deutsch]] }}} <
><
> <> ############################################################################################################################################ = Info = The here described settings and procedures are related to the current version 1.07 Jeti.<
> You can download the latest software directly from the homepage of Jeti: [[http://www.jetimodel.de/index.php?page=downloads&category=73|Homepage]] <
><
> Already finished model memories for the DS-16 as well as a suitable setting for the !FlightCtrl can be downloaded further below [[#download|"Example Setting - Download"]]. <
><
> ############################################################################################################################################ = Jeti DS-16 = '''Shoplink: [[https://www.mikrocontroller.com/index.php?main_page=index&cPath=108|Jeti DS-16]]''' <
><
> The DS-16 is a perfect transmitter for the !MikroKopter. With this transmitter you are able to use all 12 channels of the !FlightCtrl. <
><
> The data: <
> * 16 channel for switches, buttons and potis__ * 2,4GHz transfer technology__ * Displays MikroKopter-Telemetry on the build-in and illuminated 3,8" display (320x240 Pixel)__ * Voice output of the telemetry values (via connected loudspeaker or headset)__ * 10 switches (5 three-way switches, 4 two-way switches and 1 push-button)__ * 4 analog potis__ * Future proofed through upgradeability via USB interface__ * Recording of the telemetry data * PC interface * Different languages can be set (German, Cestina, English, Francais)__ ||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=135753&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=135756&g2_serialNumber=2}}]]|| ||Jeti DS-16|| {i} The transmitter is only availabe in Mode5-configuration (with spring in the gas-stick also) in this [[https://www.mikrocontroller.com/index.php?main_page=index&cPath=108|Online Shop]]. <
> <
> {{{#!wiki caution '''INFO:''' The Jeti-EX-Telemetry is only supported from '''!FlightControl V2.1''' and '''software version V0.90'''.<
> Informations about the Version 0.90 you can find here: [[en/Firmware-0.90|V0.90]]<
> }}} ############################################################################################################################################ == Instruction for the DS-16 == The instruction for the currently valid version can be downloaded directly from Jeti: [[http://www.jetimodel.de/index.php?page=downloads&category=73|Jeti DS-16 Instruction manual]] <
><
> ############################################################################################################################################ = Set transmitter + bind receiver = The easiest way is (for beginners, too) to control the !MikroKopter in '''Mode2'''. <
> The function "Throttle" and "Yaw" is on the left control stick, "Nick" and "Roll" on the right control stick.<
> ############################################################################################################################################ == Set Stick Mode == You can get the Jeti DS-16 transmitter either way in mode 1/3 or 2/4. For the use of the !MikroKopter the transmitter in mode 2/4 is recommended.<
><
> A subsequent change afterwards i.e. Mode1 to Mode2 is via an appropriate software possible. For this purpose the control sticks must be mechanically exchanged against each other. (See instruction: Changing the control mode)<
> The throttle stick has no spring and cannot be used with a spring in neutral position. <
><
> To change the mode you proceed as follows: <
><
> ||'''Step1:''' <
>Main menu<
>choose "System functions" ||||'''Step2:''' <
>and open the menu point<
>"Transmitter configuration"||||'''Step3:''' <
>Switch here to<
>"Control mode"...||||'''Step4:''' <
>...and set the desired<
>mode.|| ||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131750&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131754&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131757&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131761&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131763&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131767&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131769&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131773&g2_serialNumber=2}}]]|| (To enlarge -> click on the image) <
><
> ############################################################################################################################################ == Bind the receiver == The transmitter and the receiver need to be bind to each other. <
><
> '''IMPORTANT:''' <
> For the use on the !MikroKopter a receiver with PPM sum signal is necessary. The receiver R9 which comes with the transmitter __cannot__ be used.<
> Here you can use i.e. the RMK2 Duplex Receiver: [[https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=108&products_id=516|Shoplink]]<
><
> To bind the receiver you proceed as follows: * Transmitter and receiver are switched OFF. * Connect the '''BIND PLUG''' to the plug '''EXT''' on the receiver. * Supply voltage to the receiver. * Now switch ON the transmitter. The receiver will bind automatically with the transmitter.<
> This procedure will be acknowledged with an acoustical signal on the transmitter. ############################################################################################################################################ == Update receiver == It could be possible that older RMK2 receiver provide only 8 channels. That you can change in the settings of the receiver.<
> If the change to 12 channels is not possible for some reason, you can update the receiver with the following software: [[http://www.mikrokopter.de/ucwiki/DS-16?action=AttachFile&do=get&target=JetiUpdate_RMK2_12Channels.exe|Download]] <
> (Description of the Update: [[JetiUpdate|Link]]) To set the receiver via the transmitter you proceed as follows: <
><
> ||'''Step1:''' <
>In the main menu<
>choose "System functions"...||||'''Step2:''' <
>...down to "Jetibox" and<
>open it with "OK"...||||'''Step3:''' <
>...switch with a right-click<
>to "RX" ...||||'''Step4:''' <
>...down to "Receiver Type"<
>-|| ||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131694&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131698&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131701&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131705&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131713&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131717&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131719&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131723&g2_serialNumber=2}}]]|| (To enlarge -> click on the image) <
><
> ||'''Step5:''' <
>Down to <
>"!MeasureOrSetting"...||||'''Step6:''' <
>...right to the<
>sub-menu "Main Setting"...||||'''Step7:''' <
>...down to menu point<
>"!OutputChannelCnt" ...||||'''Step8:''' <
>...and change here to "PPM12" <
> - Done!|| ||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131725&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131729&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131731&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131735&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131737&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131741&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131743&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131747&g2_serialNumber=2}}]]|| (To enlarge -> click on the image) <
><
> ############################################################################################################################################ = KopterTool = Is the receiver addressed properly and receives the telemetry data, '''Jeti Satellite''' need to be set in the settings. An additional checkmark should be set at ''Telemetry: Speak all events''.<
><
> [[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=132042&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=132046&g2_serialNumber=2}}]] (To enlarge -> click on the image) <
><
> ############################################################################################################################################ = Buttons = On the DS-16 transmitter you go through the menu mainly with the three buttons down on the right side: <
><
> [[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=132052&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=132056&g2_serialNumber=2}}]] (To enlarge -> click on the image) <
><
> ############################################################################################################################################ = New model memory = So that you can use the !MikroKopter an appropriate model memory need to be set before.<
> Here you assign the channels to the control sticks, switches, buttons etc. ############################################################################################################################################ == Channels == This is an example assignment of the channels and is used in the following descriptions. Any other assignment is possible. <
><
> ||-||Channel 1||-||=>||Throttle|| ||-||Channel 2||-||=>||Roll|| ||-||Channel 3||-||=>||Nick|| ||-||Channel 4||-||=>||Yaw|| ||-||Channel 5||(Poti1)||=>||Function Hold Altitude|| ||-||Channel 6||(Poti2)||=>||Function GPS (PositionHold / ComingHome)|| ||-||Channel 7||(Poti3)||=>||Zoom|| ||-||Channel 8||(Poti4)||=>||Function CareFree|| ||-||Channel 9||(Poti5)||=>||Camera tilt (Nick)|| ||-||Channel 10||(Poti6)||=>||Camera tilt (Roll)|| ||-||Channel 11||(Poti7)||=>||Trigger camera & LED on/off|| ||-||Channel 12||(Poti8)||=>||Function motor safety|| <
><
> ############################################################################################################################################ == Set model memory == To have no mixers or other links in the new model we choose here directly the model type ''Truck&Boat''.<
> The switches on the transmitter will be set in the new model memory in that way, that all switches are "OFF" when pointing away from you.<
> To achieve this, the function of some channels need to be reversed with '''Rev.'''.<
><
> In our example, all channels have been reversed with "Rev." but not channel 1+3.<
><
> ||'''Step1:''' <
>Choose in the main menu "Choose model/<
>-modification"...||||'''Step2:''' <
>...and choose there "New model" <
> ||||'''Step3:''' <
>Choose here first at all<
>the model name...||||'''Step4:''' <
>...set it and confirm with<
>"OK"|| ||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131776&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131780&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131782&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131786&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131787&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131791&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131792&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131796&g2_serialNumber=2}}]]|| (To enlarge -> click on the image) <
><
> ||'''Step5:''' <
>Choose now "Truck+Boat"<
>and with the double arrow<
>to the next window...||||'''Step6:''' <
>...do not make changes here<
>continue with the double arrow<
>to the next window||||'''Step7:''' <
>Here now the<
>channels will be set<
>-||||'''Step8:''' <
>With "Enter" we edit the<
>the first entry<
>-|| ||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131797&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131801&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131802&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131806&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131807&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131811&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131812&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131816&g2_serialNumber=2}}]]|| (To enlarge -> click on the image) <
><
> ||'''Step9:''' <
>First the name <
>need to be set and<
>confirmed with "OK"||||'''Step10:''' <
>then change to<
>Control and you <
>can assign it||||'''Step11:''' <
>Here now you can<
>choose the desired Control<
>||||'''Step12:''' <
>Here we choosed the throttle-stick <
>(if necessary:<
>change direction with Rev.)|| ||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131817&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131821&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131827&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131831&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131832&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131836&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131837&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131841&g2_serialNumber=2}}]]|| (to enlarge -> click on the image) <
><
> ||'''Step13:''' <
>With the '''"+"'''<
>you set new Geber <
>as shown here||||'''Step14:''' <
>Are all 12 channels<
>assigned, it should<
>look in that way ||||'''Step15:''' <
>At the end with "YES"<
>confirm the new model...<
>-||||'''Step16:''' <
>...DONE!<
>-<
>-|| ||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131842&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131846&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131847&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131851&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131852&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131856&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131857&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131861&g2_serialNumber=2}}]]|| (To enlarge -> click the image) <
><
> ############################################################################################################################################ = Telemetry Settings = With this transmitter, like the Graupner HoTT System, you are able to get warning messages for the individual functions via voice output.<
> The necessary voice file need to be downloaded to the transmitter. <
> The voice files need to be copied in the transmitter to \Audio\en and \Voice\en.<
> (Different languages need to be copied correspondingly, i.e. \fr \nl \es)<
><
> {{{{#!wiki important '''Download''' Here you can download the appropriate voice file: [[http://www.mikrokopter.de/ucwiki/DS-16?action=AttachFile&do=get&target=JetiVoice.zip|Deutsch - Download]] + [[http://www.mikrokopter.de/ucwiki/DS-16?action=AttachFile&do=get&target=JetiVoice_en.zip|English - Download]] }}}} The voice files are listed here: <
> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=132047&g2_serialNumber=3}} ############################################################################################################################################ == Assign voice files == The voice files are assigned to the functions via a morse code. So that they are announced accordingly, you have to assign the newly copied voice files in the transmitter.<
><
> ||'''Step1:''' <
>In the main menu choose<
>"Stopwatch/Sensors"<
>...||||'''Step2:''' <
>...and the entry<
>"Alarms" <
>-||||'''Step3:''' <
>Open the first<
>entry with "Enter"...<
>-||||'''Step4:''' <
>...and switch on the alarm with "Enter"<
><
>-|| ||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131863&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131867&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131869&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131873&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131874&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131878&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131879&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131883&g2_serialNumber=2}}]]|| (To enlarge -> click on the image) <
><
> Now each morse code sign from '''A''' to '''Z''' will be displayed with the appropriate voice file: <
> [[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131884&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131888&g2_serialNumber=2}}]] (To enlarge -> click on the image) <
><
> Now you need to assign to each morse code the before copied voice files new.<
><
> You proceed as follows: <
><
> Morse code '''A ".-"''' contains the voice file "_MK_'''A'''_MK.wav.<
> Morse code '''B "-..."''' contains the voice file "_MK_'''B'''_CALIBRATE.wav.<
> Morse code '''C "-.-."''' contains the voice file "_MK_'''C'''_STARTING.wav.<
> .<
> .<
> .<
> Morse code '''Z "--.."''' contains the voice file "_MK_'''Z'''_GPS_FIX.wav.<
><
> After selecting the file which need to be modified the available language files appear. Now you can look through all files using the double arrow.<
> Here are all voice files listed: <
><
> [[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131894&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131899&g2_serialNumber=2}}]] [[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131900&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131905&g2_serialNumber=2}}]] [[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131906&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131911&g2_serialNumber=2}}]] [[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131912&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131917&g2_serialNumber=2}}]] [[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131918&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131923&g2_serialNumber=2}}]] [[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131924&g2_serialNumber=2|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131928&g2_serialNumber=4}}]] (To enlarge -> click on the image) <
><
> ############################################################################################################################################ == Create voice files by yourself == For that reason that the voice file is in ''wav''-format you can create files by yourself. <
> This you can do i.e. with the Windows Audiorecorder and a microphone.<
> You can do those files also with a "Text-To-Speach" generator from the Internet (i.e.: [[http://www2.research.att.com/~ttsweb/tts/demo.php|Link]]). ############################################################################################################################################ == Play VARIO-altitude regulator via loudspeaker == Like the voice output, a tone can be played via the loudspeaker automatically with switched on altitude regulator on the transmitter for climbing and falling.<
><
> ||'''Step1:''' <
>In the main menu choose<
>"Stopwatch/Sensors"<
>||||'''Step2:''' <
>Choose there the entry<
>"Vario" <
>-||||'''Step3:''' <
>Open the entry<
>"Mode" with "Enter"...<
>-||||'''Step4:''' <
>...and choose "Value EX"<
>-<
>-|| ||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131863&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131867&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131930&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131934&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131936&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131940&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131941&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131945&g2_serialNumber=2}}]]|| (To enlarge -> click on the image) <
><
> ||'''Step5:''' <
>Change here the <
>"Dead zone" <
>in "-1" and "1"||||'''Step6:''' <
>Next step as<
>"Parameter EX" ...<
>-||||'''Step7:''' <
>...choose "Vario" <
>-<
>-||||'''Step8:''' <
>Done!<
>-<
>-|| ||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131946&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131950&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131951&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131955&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131956&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131960&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131961&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131965&g2_serialNumber=2}}]]|| (To enlarge -> click on the image) <
><
> ############################################################################################################################################ == Telemetry ads in the display == Like with the Graupner HoTT System, you can display telemetry values on the main screen.<
> The data which need to be displayed in the main screen you can put together by yourself.<
> ||'''Step1:''' <
>The main menu looks like in that way <
>without displayed telemetry<
>||||'''Step2:''' <
>In the main menu choose<
>"Stopwatch/Sensors"...<
>-||||'''Step3:''' <
>... and choose "Display telemetry"<
><
>-||||'''Step4:''' <
>Here now choose<
>with the '''"+"''' button<
>the values|| ||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131985&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131989&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131991&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131995&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=131996&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=132000&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=132001&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=132005&g2_serialNumber=2}}]]|| (To enlarge -> click on the image) <
><
> Then select the following telemetry values: <
><
> [[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=132006&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=132011&g2_serialNumber=2}}]] (To enlarge -> click on the image) <
><
> The example settings look in that way: <
><
> ||'''Page1:''' <
>Display with: <
>Voltage, Capacity, Current,<
>Altitude, Distance, Home-Dir||||'''Page2:''' <
>Display with: <
>Jetibox, rcvd. satellites,<
>Speed||||'''Page3:''' <
>Display with: <
>!ErrorCode, Max.Temp.,<
>Magn.field|| ||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=132012&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=132016&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=132017&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=132021&g2_serialNumber=2}}]]||||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=132022&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=132026&g2_serialNumber=2}}]]|| (To enlarge -> click on the image) <
><
> ############################################################################################################################################ <> = Example Setting - Download = == Model memory for transmitter == (!) Already pre-made model memories with the above described channel- and telemetry settings can be downloaded here. <
> The model memories 1+2 differ only in the use of the camera triggering (3-way switch for LANC or button for the Shuttercable).<
> Everything else is identical. <
><
> ||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=135760&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=135765&g2_serialNumber=2}}]]||[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=135766&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=135771&g2_serialNumber=2}}]]|| ||[[http://www.mikrokopter.de/ucwiki/DS-16?action=AttachFile&do=get&target=0001Mikr.jsn|Download Model memory 1]]||[[http://www.mikrokopter.de/ucwiki/DS-16?action=AttachFile&do=get&target=0002Mikr.jsn|Download Model memory 2]]|| (To enlarge -> click on the image) <
><
> After downloading the files (0001Mikr.jsn or 0002Mikr.jsn), you can copy them directly in the transmitter into the folder '''/Model''' .<
> If you use a camera with the trigger on a button as well as the LANC, you can save both model memories in the transmitter.<
> Here you need to switch only between the both model memories , depending on the use.<
> How to read or import model memories from the transmitter can be read in the instruction manual on page 93.<
><
> The channel assignment is like listed above. <
> Using this model memories you __must__ set the functions / channels in the !FlightCtrl.<
> (Or download the setting for the !FlightCtrl listed below)<
><
> '''TIPP:''' Who uses a different mode rather than '''Mode 2''', can also use the model memory. <
> After the import of the model memories you need to set the desired mode (1,3,4) by yourself.<
> ############################################################################################################################################ == Settings FlightCtrl == An appropriate setting for the !FlightCtrl can be downloaded here: [[http://www.mikrokopter.de/ucwiki/DS-16?action=AttachFile&do=get&target=ARF-Kopter-Setting-2.mkp|Download]] <
> The settings for the channels and the model memories need to be adjusted accordingly for the DS-16.<
><
> To import the settings into the !FlightCtrl, open the settings in the KopterTool. <
> Here you "click" now on the button '''Load''' in the lower bar and open the downloaded setting.<
> With a click on the button '''Write''' you transfer the setting into the FlightCtrl.<
><
> ATTENTION: <
> The !FlightCtrl has 5 memories (Settings). If you want to use the downloaded setting in all memories, you need to choose every memory (1-5) and save the setting with '''Write'''.<
> After writing the setting into the !FlightCtrl you must (if not already done) set the right mixer ([[MK-Parameter/Mixer-SETUP|Link]]). ################################################################################################################################################################################################# <
><
><
><
> = SinglePoint + Fixed/Relative Waypoints save/load with the transmitter = With Jeti remote control you have the option to: * save or load '''!SinglePoint Waypoints''' during flight <
> or * an to open an already existing '''Fixed/Relative Waypoints'''-flight . <
> How to do this, can be read here: '''[[en/SinglePoint|SinglePoint + Fixed/Relative Waypoints]]''' <
> <
> ---- . KategorieFernsteuerung