angle adapter plates

With these adapter plates the motors can be tilted by 3°

They just have to be mounted between the motor and the aluminium arm.

The angle adapters increase the yawing of large MikroKopters (e.g. Okto) significantly

Notes:

• the orientation is important (see below)
• If the lenght of the riggers is different, you might need different angles (2° for long riggers and 3° for short)

• please use screw locking adhensive

Difference 2° and 3°

• Angle adapter 3° (Black) -> for short riggers

• Angle adapter 2° (Silver) -> for long riggers

Left rotating motors (top view)

Clockwise rotating motors, (viewed from above) must be tilted as follows:

This is needed for:

• Nick-Motors of a quadro (front and rear)
• Hexa, October and bigger: all motors with an odd address (1,3,5,7)

Right rotating motors (top view)

Counter-clockwise rotating motors, (viewed from above) must be tilted as follows:

This is needed for:

• Roll-Motors of a quadro (left and right)
• Hexa, October and bigger: all motors with an even address (2,4,6,8)

---

KategorieAnleitung KategorieEnglish