Diese Seite dient zum Einfügen in andere Seiten per Include-Macro. So wird redundanter Inhalt vermieden.

Syntax: <<Include(include/assembling/powerboard-HexaXL3, , from="^-----$", to="^-----$")>>
---> fügt diese Seite in Deutsch zwischen den Horizontalen-Trennern ein.

This page is used to insert into other pages via include macro. Thus, avoid redundant content.

Syntax: <<Include(include/assembling/powerboard-HexaXL3, , from="^------$", to="^------$")>>
---> add this page into English between horizontal separators.

Cette page est utilisée pour être insérée dans d'autres via une macro d'insertion. Ceci évitera le contenu redondant.

Syntax: <<Include(include/KopterTool/powerboard-HexaXL3, , from="^-------$", to="^-------$")>>
---> Ajoute la partie française de cette page contenue entre les bandeaux horizontaux.




Deutsch Start



Summer anschließen

Der Summer wird über ein Kabel z.B. am Ende eines Auslegers angebracht oder mit der Buzzer Adapterplatine abgesetzt.
{i} Wird der Summer dichter, oder aber auf der FlightCtrl montiert, wird bei Nutzung vom Kompass (MK3Mag) dessen Funktion gestört!

Angelötet wird der Summer auf dem "Buzz"-Pad und "-"-Pad.

  • Summer plus = rotes Kabel = "Buzz"
  • Summer Minus = schwarzes Kabel = "-" = "minus"

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=74636&g2_serialNumber=2

Beleuchtung

Die Beleuchtung (LED) kann an einem der drei innen liegenden "+" und "-" Pad's angelötet werden.

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=74640&g2_serialNumber=2

Beleuchtung schaltbar

Möchte man seine Beleuchtung schaltbar machen oder ein Blinkmuster über die FlightCtrl realisieren, kann eine kleine Schaltung auf den Stromverteiler gelötet werden.
Hierfür stehen drei Flächen auf dem Verteiler zur Verfügung. Die Schaltung besteht aus einem 10k Ohm Widerstand und einem BC807 Transistor.
Der Eingang der Schaltung wird dann auf einen der Schaltausgänge der FlightCtrl (J16/J17) gelegt und die "Plus"-Leitung der LED's an den Ausgang der Schaltung.

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=77789&g2_serialNumber=2

Alternativ kann auch das optional erhältliche ExtensionPCB hierfür genutzt werden. Hiermit können auch mehr LED's mit mehr Leistung genutzt werden.
Der Anschluss ist hier beschrieben: ExtensionPCB

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=73058&g2_serialNumber=2

FlightControl anschließen

Die FlightCtrl2.1 wird später über ein 5-poliges Molex-Kabel angeschlossen. Dieses wird mit einem Kabelbinder befestigt, damit es sich nicht lösen kann.

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=74656&g2_serialNumber=2

/!\ Die FlightCtrl muss mit dem aufgedrucktem Pfeil zum Ausleger Nr.1 (roter Ausleger) zeigen!



Deutsch Stop





Englisch Start



Connect the Buzzer

You can mount the buzzer on a rigger or with a Buzzer Adapter board.
{i} If you use a MK3Mag and the buzzer would be to close to the compass, the compass readings could be disturbed!

Solder the Buzzer on the "Buzz"-Pad (+) and "-"-Pad.

  • buzzer plus = red cable = "Buzz"
  • buzzer GND = black cable = "-" = "minus"

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=74636&g2_serialNumber=2

Lighting

You can connecting the lighting (LED) directly to one of the three internal "+" and "-" pad.

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=74640&g2_serialNumber=2

Lighting shiftable (1)

If you want to make its lighting switchable or implement a flashing pattern on the FlightCtrl, a small circuit are soldered to the power distribution.
There are three areas on the powerboard available. The circuit consisting of a 10K Ohm resistor and a BC807 transistor.
The input of the circuit is then placed on one of the outputs of FlightCtrl (J16/J17) and the "+" cable of the LEDs to the output of the circuit.

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=77789&g2_serialNumber=2

Lighting shiftable (2)

Also you can use the optional ExtensionPCB for this purpose. The connection is described here:: ExtensionPCB

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=73058&g2_serialNumber=2

connect the FC

The FlightCtrl2.1 can connected later with the Molex-cable.

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=74656&g2_serialNumber=2

/!\ The printed arrow on the FlightCtrl must show to the on the rigger No.1 (red rigger) !



Englisch Stop





French Start



Connect the Buzzer

You can mount the buzzer on a rigger or with a Buzzer Adapter board.
{i} If you use a MK3Mag and the buzzer would be to close to the compass, the compass readings could be disturbed!

Solder the Buzzer on the "Buzz"-Pad (+) and "-"-Pad.

  • buzzer plus = red cable = "Buzz"
  • buzzer GND = black cable = "-" = "minus"

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=74636&g2_serialNumber=2

Lighting

You can connecting the lighting (LED) directly to one of the three internal "+" and "-" pad.

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=74640&g2_serialNumber=2

Lighting shiftable (1)

If you want to make its lighting switchable or implement a flashing pattern on the FlightCtrl, a small circuit are soldered to the power distribution.
There are three areas on the powerboard available. The circuit consisting of a 10K Ohm resistor and a BC807 transistor.
The input of the circuit is then placed on one of the outputs of FlightCtrl (J16/J17) and the "+" cable of the LEDs to the output of the circuit.

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=77789&g2_serialNumber=2

Lighting shiftable (2)

Also you can use the optional ExtensionPCB for this purpose. The connection is described here:: ExtensionPCB

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=73058&g2_serialNumber=2

connect the FC

The FlightCtrl2.1 can connected later with the Molex-cable.

http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=74656&g2_serialNumber=2

/!\ The printed arrow on the FlightCtrl must show to the on the rigger No.1 (red rigger) !



French Stop


  • KategorieInclude/assembling

Diese Seite dient zum Einfügen in andere Seiten per Include-Macro. So wird redundanter Inhalt vermieden.

Syntax: <<Include(include/assembling/powerboard-HexaXL3, , from="^-----$", to="^-----$")>>
---> fügt diese Seite in Deutsch zwischen den Horizontalen-Trennern ein.

This page is used to insert into other pages via include macro. Thus, avoid redundant content.

Syntax: <<Include(include/assembling/powerboard-HexaXL3, , from="^------$", to="^------$")>>
---> add this page into English between horizontal separators.

Cette page est utilisée pour être insérée dans d'autres via une macro d'insertion. Ceci évitera le contenu redondant.

Syntax: <<Include(include/KopterTool/powerboard-HexaXL3, , from="^-------$", to="^-------$")>>
---> Ajoute la partie française de cette page contenue entre les bandeaux horizontaux.




Deutsch Start



Summer anschließen

Der Summer wird über ein Kabel z.B. am Ende eines Auslegers angebracht oder mit der Buzzer Adapterplatine abgesetzt.
{i} Wird der Summer dichter, oder aber auf der FlightCtrl montiert, wird bei Nutzung vom Kompass (MK3Mag) dessen Funktion gestört!

Angelötet wird der Summer auf dem "Buzz"-Pad und "-"-Pad.

  • Summer plus = rotes Kabel = "Buzz"
  • Summer Minus = schwarzes Kabel = "-" = "minus"

http://gallery.mikrokopter.de/main.php/v/tech/HexaXL-Buzzer.jpg.html

Beleuchtung

Die Beleuchtung (LED) kann an einem der drei innen liegenden "+" und "-" Pad's angelötet werden.

http://gallery.mikrokopter.de/main.php/v/tech/HexaXL-LED.jpg.html

Beleuchtung schaltbar

Möchte man seine Beleuchtung schaltbar machen oder ein Blinkmuster über die FlightCtrl realisieren, kann eine kleine Schaltung auf den Stromverteiler gelötet werden.
Hierfür stehen drei Flächen auf dem Verteiler zur Verfügung. Die Schaltung besteht aus einem 10k Ohm Widerstand und einem BC807 Transistor.
Der Eingang der Schaltung wird dann auf einen der Schaltausgänge der FlightCtrl (J16/J17) gelegt und die "Plus"-Leitung der LED's an den Ausgang der Schaltung.

http://gallery.mikrokopter.de/main.php/v/tech/HexaXL-Stromverteiler3.jpg.html

Alternativ kann auch das optional erhältliche ExtensionPCB hierfür genutzt werden. Hiermit können auch mehr LED's mit mehr Leistung genutzt werden.
Der Anschluss ist hier beschrieben: ExtensionPCB

http://gallery.mikrokopter.de/main.php/v/tech/ExtensionPCB-oben2.jpg.html

FlightControl anschließen

Die FlightCtrl2.1 wird später über ein 5-poliges Molex-Kabel angeschlossen. Dieses wird mit einem Kabelbinder befestigt, damit es sich nicht lösen kann.

http://gallery.mikrokopter.de/main.php/v/tech/HexaXL-FC.jpg.html

/!\ Die FlightCtrl muss mit dem aufgedrucktem Pfeil zum Ausleger Nr.1 (roter Ausleger) zeigen!



Deutsch Stop





Englisch Start



Connect the Buzzer

You can mount the buzzer on a rigger or with a Buzzer Adapter board.
{i} If you use a MK3Mag and the buzzer would be to close to the compass, the compass readings could be disturbed!

Solder the Buzzer on the "Buzz"-Pad (+) and "-"-Pad.

  • buzzer plus = red cable = "Buzz"
  • buzzer GND = black cable = "-" = "minus"

http://gallery.mikrokopter.de/main.php/v/tech/HexaXL-Buzzer.jpg.html

Lighting

You can connecting the lighting (LED) directly to one of the three internal "+" and "-" pad.

http://gallery.mikrokopter.de/main.php/v/tech/HexaXL-LED.jpg.html

Lighting shiftable (1)

If you want to make its lighting switchable or implement a flashing pattern on the FlightCtrl, a small circuit are soldered to the power distribution.
There are three areas on the powerboard available. The circuit consisting of a 10K Ohm resistor and a BC807 transistor.
The input of the circuit is then placed on one of the outputs of FlightCtrl (J16/J17) and the "+" cable of the LEDs to the output of the circuit.

http://gallery.mikrokopter.de/main.php/v/tech/HexaXL-Stromverteiler3.jpg.html

Lighting shiftable (2)

Also you can use the optional ExtensionPCB for this purpose. The connection is described here:: ExtensionPCB

http://gallery.mikrokopter.de/main.php/v/tech/ExtensionPCB-oben2.jpg.html

connect the FC

The FlightCtrl2.1 can connected later with the Molex-cable.

http://gallery.mikrokopter.de/main.php/v/tech/HexaXL-FC.jpg.html

/!\ The printed arrow on the FlightCtrl must show to the on the rigger No.1 (red rigger) !



Englisch Stop





French Start



Connect the Buzzer

You can mount the buzzer on a rigger or with a Buzzer Adapter board.
{i} If you use a MK3Mag and the buzzer would be to close to the compass, the compass readings could be disturbed!

Solder the Buzzer on the "Buzz"-Pad (+) and "-"-Pad.

  • buzzer plus = red cable = "Buzz"
  • buzzer GND = black cable = "-" = "minus"

http://gallery.mikrokopter.de/main.php/v/tech/HexaXL-Buzzer.jpg.html

Lighting

You can connecting the lighting (LED) directly to one of the three internal "+" and "-" pad.

http://gallery.mikrokopter.de/main.php/v/tech/HexaXL-LED.jpg.html

Lighting shiftable (1)

If you want to make its lighting switchable or implement a flashing pattern on the FlightCtrl, a small circuit are soldered to the power distribution.
There are three areas on the powerboard available. The circuit consisting of a 10K Ohm resistor and a BC807 transistor.
The input of the circuit is then placed on one of the outputs of FlightCtrl (J16/J17) and the "+" cable of the LEDs to the output of the circuit.

http://gallery.mikrokopter.de/main.php/v/tech/HexaXL-Stromverteiler3.jpg.html

Lighting shiftable (2)

Also you can use the optional ExtensionPCB for this purpose. The connection is described here:: ExtensionPCB

http://gallery.mikrokopter.de/main.php/v/tech/ExtensionPCB-oben2.jpg.html

connect the FC

The FlightCtrl2.1 can connected later with the Molex-cable.

http://gallery.mikrokopter.de/main.php/v/tech/HexaXL-FC.jpg.html

/!\ The printed arrow on the FlightCtrl must show to the on the rigger No.1 (red rigger) !



French Stop


  • KategorieInclude/assembling