|
Größe: 16147
Kommentar:
|
← Revision 25 vom 17.05.2016 08:58 ⇥
Größe: 0
Kommentar:
|
| Gelöschter Text ist auf diese Art markiert. | Hinzugefügter Text ist auf diese Art markiert. |
| Zeile 1: | Zeile 1: |
| <<RedBox(<<BR>>'''Attention: Ces informations en français ne sont pas à jour !<<BR>>[[en/HottUpdate|vous devriez consulter la dernière version en anglais ici !]] (à utiliser pour les non-anglophone et avec prudence donc !...)<<BR>><<BR>>)>> ||<class="MK_TableNoBorder">This page as a '''PDF-Document'''? Simply click on the symbol and wait a few seconds... ---> ||<class="MK_TableNoBorder"><<PDFIcon>>|| {{{#!wiki MK_Nav ||||||<class="MK_Nav_Header">HoTT - Update|| }}} {{{#!wiki MK_select1 * {{http://mikrokopter.de/images/eng.gif}} [[en/HottUpdate|english]] * {{http://mikrokopter.de/images/deu.gif}} [[HottUpdate|deutsch]] }}} <<BR>><<BR>> See also: [[en/HoTT|HoTT]] <<BR>><<BR>> <<TableOfContents>> #################################################################################################################################################################################################### <<BR>><<BR>><<BR>><<BR>> <<Anchor(Software)>> = Software for the Update = The necessary software '''V4''' for the Graupner Transmitter/Receiver as well as the necessary language files you can download direct from the Graupner Homepage: <<BR>> Graupner HoTT MX-20: [[http://www.graupner.de/en/products/8e2f4776-e25b-42a9-96bb-fadcdda2afa9/33124.EN/product.aspx?tab=downloads|Link]]<<BR>> Graupner HoTT MC-20: [[http://www.graupner.de/en/products/8e2f4776-e25b-42a9-96bb-fadcdda2afa9/33020/product.aspx?tab=downloads|Link]]<<BR>> Graupner HoTT MC-32: [[http://www.graupner.de/en/products/8e2f4776-e25b-42a9-96bb-fadcdda2afa9/33032/product.aspx?tab=downloads|Link]]<<BR>><<BR>> <!> Veuillez vérifier la référence du produit auquel la mise à jour est destinée dans le nom du fichier<<BR>> '''Exemple:''' Le récepteur GR-16 (ref '''33508''') a besoin du fichier '''33508'''_gr_rx8_4a90_f9.bin. == Voice file == The !MikroKopter needs a !MikroKopter-specific voice-file for the HoTT-Transmitter. The name for e.g. the english File is ''English_Mikrokopter_V2.vdf''.<<BR>> There some speech-samples are substituted by MikroKopter-specific samples.<<BR>> If you would use the old file, the Transmitter would speak "maximum voltage" instead of "Calibrating".<<BR>><<BR>> If you also use a 'normal' RC-Plane, and you need also the original voices, you could put both onto the SD-Card in the Transmitter and load the right file before startin (needs about 1-2 minutes) #################################################################################################################################################################################################### <<BR>><<BR>> = Video = <<Vimeo(42939105)>> = Update the transmitter = In order to provide the latest software to the transmitter you have two opportunities: <<BR>><<BR>> * Either way you use a Micro-SD-Card which can be insert into the transmitter to download the needed software into the transmitter. * Or - the transmitter will be connected via an USB-cable to the PC. Via the Graupner Program "grStudio" you can download the new software. <<BR>><<BR>> <!> '''INFO: An update of the transmitter via a Micro-SD-Card is only possible since "V4"! <<BR>> Transmitter with the firmware "V3" need to download the new firmware via the program "grStudio".'''<<BR>><<BR>> #################################################################################################################################################################################################### <<BR>><<BR>><<BR>><<BR>> = Update transmitter - Opportunity 1: Micro-SD-Card = The needed files you can copy in an appropriate folder on the Micro-SD-Card. <<BR>> This Micro-SD-Card you insert into the transmitter and import the software via the "Hidden Mode".<<BR>> (Actual instructions => MX-20 = page 22+28 / MC-32 = page 23+32).<<BR>><<BR>> == Prepare Micro-SD-Card == To import the software via the Micro-SD-Card there must be certain directories on the Micro-SD-Card.<<BR>> The necessary directories (folder) can be done automatically from the transmitter to the Micro-SD-Karte.<<BR>><<BR>> For that you need to: * open the battery box from the transmitter and * insert an empty Micro-SD-Card into the den Micro-SD-Card-Slot. * Now you switch ON the transmitter. * After the complete boot of the transmitter you can switch the transmitter OFF. * Remove the Micro-SD-Card. <<BR>><<BR>> Now you can insert the Micro-SD-Card into an appropriate slot at your PC.<<BR>> Here you will find now the following directories: <<BR>><<BR>> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=112980&g2_serialNumber=4}}<<BR>><<BR>> If you have downloaded the needed firmware or language files you can copy them now into the appropriate folder on the Micro-SD-Card.<<BR>><<BR>> Here i.e. you copy the needed firmware file for the MX-20 in English (mx-20_1v119_English.bin) into the folder '''''Firmware''''' on the Micro-SD-Card.<<BR>><<BR>> == The Update via Micro-SD-Card == If you have prepared the Micro-SD-Card in that way you continue as follows: <<BR>> (Example: Fimware Update)<<BR>><<BR>> 1. Insert Micro-SD-Card into the transmitter. 1. Switch ON the transmitter. 1. With the key combination "left Touch-Pad '''UP/DOWN''' and the "Right Touch-Pad '''SET'''" (press to the same time) you will get into the menu '''''Hidden Mode'''''. {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113036&g2_serialNumber=2}}<<BR>><<BR>> 1. In the menu "Hidden Mode" you need to select the entry "FIRMWARE UPDATE". {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113223&g2_serialNumber=2}}<<BR>><<BR>> 1. Now you can choose the needed Firmware. {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113229&g2_serialNumber=2}}<<BR>><<BR>> 1. After confirming with '''SET''' the firmware will be installed. {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113060&g2_serialNumber=2}} <<BR>><<BR>> After a successful installation the transmitter will boot new and you can use now the transmitter.<<BR>><<BR>> If you want to install a language file into your transmitter you do it in the same way. But - you need to select '''''VOICE TRIG''''' under Point 4. #################################################################################################################################################################################################### <<BR>><<BR>><<BR>><<BR>> = Update transmitter - Opportunity 2: Program grStudio = {{{{#!wiki important '''INFO''' To update the transmitter with the program '''Firmware_Upgrade_grStudio_Ver-X.X.exe''' you must install the COM-Port Driver '''CP210x - Silicon Labs''' before!<<BR>> This driver you can download directly from the homepage of Graupner [[http://www.graupner.de/de/products/8e2f4776-e25b-42a9-96bb-fadcdda2afa9/33124/product.aspx?tab=downloads|(Link)]]. If you download there the current "V4" you will find the driver in the folder "USB Driver".<<BR>> (Instruction => MX-20 page 39 / MC-32 page 44) }}}} <<BR>><<BR>><<BR>><<BR>> == Update via grStudio == To update the transmitter with the program '''Firmware_Upgrade_grStudio_Ver-X.X.exe''' you need to continue in that way: <<BR>><<BR>> 1. Pour la mise à jour l'émetteur est connecté à l'ordinateur via USB. ||<class="MK_TableNoBorder">{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113020&g2_serialNumber=2}}||<class="MK_TableNoBorder">{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113026&g2_serialNumber=2}}|| ||<class="MK_TableNoBorder":>Example: MX-20||<class="MK_TableNoBorder":>Example: MC-32|| 1. Open program '''Firmware_Upgrade_grStudio_Ver-X.X.exe''' and select the COM-Port for the '''CP210x - Silicon Labs'''.<<BR>><<BR>> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113061&g2_serialNumber=1}} {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113064&g2_serialNumber=1}}<<BR>><<BR>> 1. Now you select under '''Transmitter''' the ''' Firmware Upgrade'''.<<BR>><<BR>> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=112990&g2_serialNumber=2}}<<BR>><<BR>> 1. Via the button '''File Browse''' you select the appropriate Firmware.<<BR>><<BR>> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=112996&g2_serialNumber=2}}<<BR>><<BR>> 1. Now you can start the update via the button '''Download Start'''. 1. It appears here now an information window which will be confirmed after reading. <<BR>><<BR>> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113001&g2_serialNumber=2}}<<BR>><<BR>> 1. Now the update is in process.<<BR>><<BR>> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113006&g2_serialNumber=2}}<<BR>><<BR>> 1. The update will be also displayed on your transmitter.<<BR>><<BR>> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113032&g2_serialNumber=2}}<<BR>><<BR>> 1. After a successful installation the transmitter will boot new and you can use now the transmitter.<<BR>><<BR>> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113008&g2_serialNumber=1}}<<BR>><<BR>><<BR>><<BR>> == Blue screen == /!\ If the update was unsuccessful and you will see only an empty illuminated display you need to download the Bootloader and the Software again. <<BR>> In the Graupner Program "Firmware_Upgrade_grStudio_Ver-x.x.exe" is help provided in the left menu bar under '''Transmitter''' and '''Emergency'''.<<BR>> The download of the software ist pretty much similar to the Update. * Select with the button '''File Browse''' the necessary Firmware. * Start with the button ''' Download Start''' the recovery of the transmitter. * Switch ON the transmitter (if the transmitter will not switch ON - just disconnect the battery on time).<<BR>><<BR>> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113071&g2_serialNumber=2}} {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113014&g2_serialNumber=2}} #################################################################################################################################################################################################### <<BR>><<BR>><<BR>><<BR>> = Update Receiver with the Program grStudio = If you want to make an Firmware-Update with your receiver you can do it either way via the Graupner "USB-Adapter" [[http://www.graupner.de/de/products/ad5bb423-3174-4c1b-aad2-6920ad769c15/7168.6/product.aspx|(Link)]] or the !FlightControl.<<BR>><<BR>> If you want to do the Update via the !FlightCtrl there __must__ be a software version installed V0.86 or higher.<<BR>><<BR>> '''__IMPORTANT__:''' Updating via the !FlightCtrl the MK-USB __must__ be connected __direct__ to the !FlightCtrl (not via the Navi!).<<BR>> The Graupner receiver is here as usual connected to the !FlightCtrl via the PPM-cable and also the telemetry cable.<<BR>><<BR>> ||<class="MK_TableNoBorder">[[http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=105430&g2_serialNumber=1|{{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=105433&g2_serialNumber=2}}]]|| ||<class="MK_TableNoBorder":>(Example image) To enlarge -> Click on the image|| #################################################################################################################################################################################################### <<BR>><<BR>><<BR>><<BR>> == Download the required software == Before you can start the Update on your receiver you need to download the appropriate "Update-File".<<BR>><<BR>> Infos you will find under: '''[[#Software|Software for the Update]]''' #################################################################################################################################################################################################### <<BR>><<BR>><<BR>><<BR>> == Configurer la FC en mode mise à jour == The following requirements must be met: <<BR>> * The jumper "JET" on the Flight is closed. <<BR>> * The cable for the telemetry is soldered on the "RX" Pad . * The !FlightCtrl is __direct__ connected with the MK-USB and supplied with voltage.<<BR>><<BR>> In the KopterTool open via the button '''Firmware Update & Terminal...''' the terminal window.<<BR>> <!> '''__Note__:''' Le récepteur "Hott" doit déjà être sélectionné dans KopterTool (menu channels).<<BR>><<BR>> Dans la fenêtre ''Mise à jour firmware & terminal'' Faire un clic droit de la souris dans la zone grise à côté du bouton ''Mise à jour firmware'' et cliquez sur l'option: "Activate HoTT update mode...".<<BR>><<BR>> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113195&g2_serialNumber=2}}<<BR>><<BR>> à La fermeture du message d'avertissement, le MKTool ouvre une connexion directe entre le MKUSB et le récepteur HoTT, et (le MKTool) se ferme: <<BR>><<BR>> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113203&g2_serialNumber=1}}<<BR>><<BR>> After you confirmed the note window the !KopterTool will close and a data channel to the HoTT receiver will open to the same time.<<BR>><<BR>> '''__IMPORTANT__:''' Déconnecter la nappe trois-conducteurs reliant le récepteur PPM (ne conserver que la liaison data).<<BR>><<BR>> #################################################################################################################################################################################################### <<BR>><<BR>><<BR>><<BR>> == Mise à jour avec l'outil Graupner == To update now the receiver you can open the program '''Firmware_Upgrade_grStudio_Ver-X.X.exe'''. You do that as follows: <<BR>><<BR>> 1. Open program '''Firmware_Upgrade_grStudio_Ver-X.X.exe''' and select under "Device" the entry '''HoTT Receiver'''.<<BR>><<BR>> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113134&g2_serialNumber=2}}<<BR>><<BR>> 1. Via the button '''File Browse''' you select the appropriate Firmware for the receiver. . For GR-12 i.e. the file '''33506_gr_rx6_amp_XaXX_e9.bin''' . For GR-16 i.e. the file '''33508_gr_rx8_XaXX_f9.bin''' . For GR-24 i.e. the file '''33512_gr_rx12_XaXX_bf.bin''' . (XaXX => Version number)<<BR>><<BR>> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113139&g2_serialNumber=2}}<<BR>> (Example: Software for the receiver GR-16)<<BR>><<BR>> 1. Now you can start the update via the button '''Download Start'''. <<BR>><<BR>> 1. Direct after you have clicked the button '''Download Start''' you need to press __and__ hold the '''SET'''-button on the receiver and you connect the PPM-cable also to the same time.<<BR>><<BR>> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113144&g2_serialNumber=4}}<<BR>><<BR>> 1. If the receiver will be detected the update will start automatically.<<BR>> (If it will not work the first time - back to step 3)<<BR>><<BR>> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113148&g2_serialNumber=2}}<<BR>><<BR>> 1. After a successful update the following info window appears: <<BR>><<BR>> {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2_itemId=113151&g2_serialNumber=1}}<<BR>><<BR>> . '''__IMPORTANT__:''' After the receiver has been initialized, as descibed in the info window, the PPM-sum-signal need to be set new via your transmitter.<<BR>><<BR>> <<BR>> '''''Impressum:''''' Traduction française: [[http://www.mk-fr.info/forum/index.php|MK-FR•info]] <<BR>> ---- . KategorieFrench |
Unterschiede zwischen den Revisionen 24 und 25