Unterschiede zwischen den Revisionen 7 und 8
⇤ ← Revision 7 vom 27.04.2017 21:10 →
Größe: 4593
Autor: HolgerB
Kommentar:
← Revision 8 vom 23.05.2017 11:50 → ⇥
Größe: 4757
Autor: HolgerB
Kommentar: == NC 2.18b (23.05.2017) ==
Gelöschter Text ist auf diese Art markiert. Hinzugefügter Text ist auf diese Art markiert.
Zeile 27: Zeile 27:
 * [[http://svn.mikrokopter.de/filedetails.php?repname=NaviCtrl&path=/tags/V2.18a/Hex-Files/Navi-Ctrl_STR9_V2_18a.hex|Navi-Ctrl V2.18a]]  * [[http://svn.mikrokopter.de/filedetails.php?repname=NaviCtrl&path=/tags/V2.18a/Hex-Files/Navi-Ctrl_STR9_V2_18b.hex|Navi-Ctrl V2.18b]]
Zeile 104: Zeile 104:
== 2.18b (27.04.2017) == == FC 2.18b (27.04.2017) ==
Zeile 107: Zeile 107:
== NC 2.18b (23.05.2017) ==
 * Serial connection to MK3Mag (old Hardware) fixed. The NC was connecting back to GPS after 5 Seconds because of GPS Data timeout

Firmware-2.18



Inhaltsverzeichnis

  1. Firmware-2.18
    1. Release date: 20.04.2017
    2. Links:
  2. Download
    1. How to update?
  3. Flyzone
    1. No flight without flyzones
  4. HotShoe Photo counter in the HoTT Text-Telemetry display
  5. Better Status text in Text-Telemetry
  6. More Information in Map-Display
  7. Other Changes
  8. Bugfixes
    1. FC 2.18b (27.04.2017)
    2. NC 2.18b (23.05.2017)

Firmware-2.18

Release date: 20.04.2017

Lizenz: LICENSE.TXT

Links:

Download


How to update?

SoftwareUpdate

Flyzone

http://gallery3.mikrokopter.de/var/albums/tech/KT_Flyzone1.png?m=1481887616

  • A flight zone can be defined.
  • Outside the Flyzone an error is reported and the MK flies back.
  • If the MK would fly further away from the zone, it would land automatically.

{i} How to set the Flyzone-Points: Hold ALT and right click into the Map

No flight without flyzones

http://gallery3.mikrokopter.de/var/albums/tech/KT_Flyzone2.png?m=1481887622

= Integration of GNSS Galileo Navigation System

http://gallery3.mikrokopter.de/var/albums/tech/GalileoEmpfang.png?m=1487157730

(Galileo satellites are displayed in blue color and have an Europe flag sign)

{i} GNSS Receivers with Galileo support are available in our shop

HotShoe Photo counter in the HoTT Text-Telemetry display

http://gallery3.mikrokopter.de/var/resizes/tech/HoTT_HotShoe.jpg?m=1487156997

Press (SET) in this menu to change between

  1. GPS Speed
  2. Magnetic field

  3. Photo Counter on the HotShoe connector (Text: "No HotShoe" if no connector attached to the FC)

Better Status text in Text-Telemetry

http://gallery3.mikrokopter.de/var/resizes/tech/Hott_Text.jpg?m=1487158232

In the last line of the Text-Telemetry you can now see the same information that you see would see in the extra Telemetry display of HoTT-Transmitters like MC-32 or MC-20.

You can now see Waypoint data etc.

More Information in Map-Display

http://gallery3.mikrokopter.de/var/resizes/tech/KT_Boat.png?m=1488369831

  • Type of Satfix
  • Active Boat-Mode

  • HotShoe adapter connected

Other Changes

  • Bugfix: EEPROM Data was reset if downgrading the firmware
  • Beeping if Parachute is active

  • Show "CalibrationError" Message if the copter is moved during calibration or one value is not correct

  • accept slightly higher tolerances during calibration

  • Bugfix: JetiMenu: ACC-Calibration during flight didn't work

  • Reinit of the GNSS receiver in case of initialisation failure

Bugfixes

FC 2.18b (27.04.2017)

  • Bugfix: Dynamic Position Hold, Teachable Carefree & RC-Lost Beep-Off were deactivated in the settings when updating from older Version to 2.18

NC 2.18b (23.05.2017)

  • Serial connection to MK3Mag (old Hardware) fixed. The NC was connecting back to GPS after 5 Seconds because of GPS Data timeout

  • KategorieFirmware/FC