Ergebnisse 276 - 300 von ungefähr 397 Ergebnissen aus ungefähr 20865 Seiten. (0.77 Sekunden)
- fr/Erstinbetriebnahme/Step14 . . . 1 Treffer
- ...'[[fr/MikroKopterTool|KopterTool]]'''<<BR>><<BR>>
What you can set up more in the '''Settings''' you can find here: '''[[fr/MK-Parameter|MK-Parameter]]'''<<BR>>
}}}
{{{#!wiki ca...
- fr/Erstinbetriebnahme/Step12 . . . 1 Treffer
- ...ed again to the MK-USB.
<<BR>><<BR>><<BR>><<BR>>
== Check in between ==
After those settings: <<BR>>
* Set the right mixer (if necessary)
* Calibration ACC
* Calibration Gyros...
- fr/BL-Ctrl_2.0 . . . 1 Treffer
- ...
. {{http://www.mikrokopter.de/ucwiki/BL-Ctrl_2.0?action=AttachFile&do=get&target=BL-Settings1.gif}}
=== Signification des paramètres: ===
* Max. Courant: Définit en ampères la ...
- flying-rabbit (em28xx.h) . . . 0 Treffer
- en/sozokopter . . . 1 Treffer
- ...uilding log =
http://www.aplanding.com/forums/showthread.php?t=1718
= Current flight settings =
[Setup] <<BR>>
Name=Diggest <<BR>>
IniVersion=1 <<BR>>
GlobalConfig=107 <<BR>>
[Cha...
- en/WaypointGenerator/NewMap . . . 1 Treffer
- ...hout a reference looks always in the same size here now a few examples with different settings. <<BR>>
For a better view a grid (2 circles) will be displayed on the maps. Circle 1 ...
- en/TowerPro50aRegler . . . 1 Treffer
- ...ure the reprogramming went well and the ESC is correctly translating I2C/TWI throttle settings into motor RPMs, remove the temporary programmer wiring, epoxy all other new wiring i...
- en/SumSignal . . . 1 Treffer
- ...29865591}}
The FlightControl operates with an inverted signal also. No change in the settings required.
Graupner HoTT uses an inverted signal for example.
== specifications ==
...
- en/SinglePoint . . . 1 Treffer
- ...lePoint'' waypoint and fly automatically to it, the airspeed is 5m/s (standard in the settings).
But you can change the speed in the !KopterTool via '''[[http://wiki.mikrokopter.de...
- en/SerialProtocol . . . 1 Treffer
- ... ||<style="text-align:center;">variable ||<style="text-align:center;">'\r' ||
= UART settings =
* 57600bd
* 8 Bit
* 1 Stopbit
* no parity
= Commands =
. The Commands based ...
- en/SerialCommands/ParamsetStruct . . . 1 Treffer
- ...All parameter settings are handled in a struct called '''struct paramset_t''' in eeprom.h.
<<BR>>
<<BR>>
{i} This structure is changes from release to release, so please take a loo...
- en/SerialCommands/ExternalControl . . . 1 Treffer
- ...ues were changed (around 2HZ), and sends it more often if any values were changed.
= Settings =
The ability to control the MK via the ExternalControl depends on the Setting
== E...
- en/SafetyFirst . . . 1 Treffer
- ... are off: move yaw- and gas stick into upper left corner until it beeps)
* Different settings can result in fundamentally different flight characteristics and occupation of the Ch...
- en/RTK . . . 1 Treffer
- ...r the flight. If you will also use the RTK-GPS for the flight you can set this in the settings of the !KopterTool ~-(''>Navi-Ctrl >Use external GPS (NMEAinput) for flight'').
Here...
- en/PointOfInterest . . . 1 Treffer
- ...S 550D (also called Canon T2i) (Objektiv: 18-55IS set to 18mm; Stabilizer:Off) (Video settings: 1280*720/50fps)
* 5,8GHz video transmitter sends the live-video to check the record...
- en/Parachute . . . 1 Treffer
- ... The IO-Function must be set to 9 = Parachute on the SD-Card<<BR>>
You can open the "settings.ini" on the microSD card with an editor and change it.
[[ http://gallery3.mikrokopt...
- en/MotorCurves . . . 1 Treffer
- ...e other motors or propeller sizes, you do this on your own risk - no warranty.
== BL-Settings ==
If not other noticed, these curves were recorded with:
* 24° Timing
* 20kHz
= H...
- en/MoteCtrl . . . 1 Treffer
- ... in the MikroKopter-Tool. You should find this option in the MK Tool -> Configuration/Settings
Explanation: Your normal Remote Control is always used as a backup device, in case t...
- en/MikroKopterRepository . . . 1 Treffer
- ...emetry hardware for the MK. Also provides an alternative to MK-Tools as a MK file and settings manager.
* RC-Expander
* Riddim Enable control of the MK via HID devices, suc...
- en/MagnetError . . . 1 Treffer
- ...the position hold with GPS is simply impossible.
. Changing the MK-Parameters in the settings will not really help regarding this issue
. Typical is that there are directions whe...
- en/MK3Mag . . . 1 Treffer
- ...and MK-Tool =
To activate the Compass use the Kopter tool (connected to FC) and under Settings->Configuration place a tick on Kompass (Compass).<<BR>>
The KopterTool can also be u...
- en/MK-USB_V3 . . . 1 Treffer
- ... via the USB port. <<BR>>
With the MK-USB you can make an software update, change the settings, see the telemetry (in the !KopterTool) or send waypoints to your copter.
#########...
- en/MK-Parameter/User . . . 1 Treffer
- ... the !FlightCtrl / !NaviCtrl not apply.
Here, no changes can be made. Therefore, all settings are left at 0. <<BR>><<BR>>
The User parameters facilitate the handover to the !Mik...
- en/MK-Parameter/Output . . . 1 Treffer
- ...#######################################
= AutoTrigger every =
You can set in the FC-Settings a distance interval to trigger photos. This you can use during a manual flight and al...
- en/MK-Parameter/Coupling . . . 1 Treffer
- ...liberately into a curve. So you can use as a rolling "aileron". <<BR>>
If the sport-settings are to strong or aggressive, you should set the value to 1.
<<BR>><<BR>><<BR>><<BR>>...