Ergebnisse 176 - 200 von ungefähr 397 Ergebnissen aus ungefähr 20861 Seiten. (0.67 Sekunden)
- it/Firmware-0.82 . . . 2 Treffer
- ...nel modulo GPS. Per disabilitare questa funzione scrivere "GPSAUTOCONFIG=0" nel file "settings.ini" nella SD inserita nello slot della Navi-ctrl
= Jeti =
== Simulazione della J...
- include/KopterTool/TerminalWindow . . . 11 Treffer
- ...echselt man in das Terminalfenster und "klickt" hier das rote Dreieck an, werden alle Settings zurückgesetzt. Nur die Kanalbelegung bleiben erhalten.<<BR>><<BR>>
{{http://gallery...
- fr/ShutterCable . . . 2 Treffer
- ...core.DownloadItem&g2_itemId=62519}}]]
* set interval and fixed bit pattern
* Here settings for Out2: fixed interval (30)
* Flash patterns is active only when the motors run
*...
- fr/Firmware-0.86 . . . 2 Treffer
- ...-s3d 2,4GHz !
= Compatibilité =
* Comparé à la version 0,84 les jeux de paramètres (settings) ''' ne sont pas compatibles ''' et seront réinitialisés
* Le MK3Mag reste sur la de...
- fr/Firmware-0.82_Jeti+ . . . 2 Treffer
- ...just
On the top right the appropriate river (*10) becomes indicated
=== page 24 ===
Settings store (only if engines out)
Arrows on the left and on the right press with one anoth...
- fr/Erstinbetriebnahme/Step9 . . . 2 Treffer
- ...Is the display looking like as shown here you __must set up correctly__ the '''"Servo settings"''' at the transmitter: <<BR>><<BR>>
{{http://gallery.mikrokopter.de/main.php?g2_vie...
- fr/Erstinbetriebnahme/Step11 . . . 2 Treffer
- ...2_itemId=99770&g2_serialNumber=1}}<<BR>><<BR>><<BR>><<BR>>
As soon as you save this settings with the button {{http://gallery.mikrokopter.de/main.php?g2_view=core.DownloadItem&g2...
- fr/Erstinbetriebnahme/Step10 . . . 2 Treffer
- ...?g2_view=core.DownloadItem&g2_itemId=99199&g2_serialNumber=2}}<<BR>><<BR>>
With this settings you can change now the tilt (Nick direction) of the camera mount over the potentiomet...
- en/heightsensor . . . 2 Treffer
- ...e on the poti and have the values one after another set up.<<BR>><<BR>>
To get the settings out of a flight, proceed as follows: <<BR>>
* (Altitude)P and (barometric) D-term [...
- en/WpEvent . . . 2 Treffer
- ...ion of the Waypoint-Waiting time.
Also there is a setting on the SD-card of the NC (SETTINGS.INI), that sets the minimul time:
* MIN_EVENT_TIME = 2 (Default is 2 seconds)
* th...
- en/WaypointGenerator/Area . . . 2 Treffer
- ...th the ''Waypoint Generator'' you can place different waypoint pattern with different settings on a map. Quickly and easily you can cover areas, put circles or planning a panorama....
- en/TowerPro25A2Regler . . . 2 Treffer
- .../), or UAVP (http://www.uavp.de/) require a very high rate of updating motor throttle settings. Most commercial ESCs are not capable of accepting PPM (PWM) pulses at a rate of more...
- en/ShutterCable . . . 2 Treffer
- ...
##############################################################################
= Settings =
To control the Shuttercable with the remote control you need a free channel on it....
- en/RangeExtender . . . 2 Treffer
- ... the side - the __green__ LED ''Power'' flashes.
1. At the used device switch to the settings / Bluetooth settings and start the Bluetooth Scan.<<BR>>
(See instruction of the use...
- en/Mikrokopter-Get-started . . . 2 Treffer
- ... for a while, until the motors stop.
In the picture below the joystick positions and settings selection are visually explained:
<<BR>>
[[http://gallery.mikrokopter.de/main.php/v...
- en/MKGPS-V3 . . . 2 Treffer
- ...-card (max. 2GB / FAT16) into the !NaviCtrl the NMEA data can be used. <<BR>>
A file "settings.ini" will be automatically created from the !NaviCtr, that provides the required para...
- en/MK-Parameter/Stick . . . 2 Treffer
- ...##########
## Text neben Bild
<<BR>>
In a total of five sets of parameters different settings can be stored in the Kopter. These can be accessed through the sticks after turning o...
- en/MK-Parameter/Mixer-SETUP . . . 2 Treffer
- ...ixels) to display the motor assembly. This image must have the same name as the saved settings file.
<<BR>>
##include_mix_begin_de
There are already several mixer tables of th...
- en/MK-Parameter/Gyro . . . 2 Treffer
- ...y swing something.
{i} Some of these values you can get while experimenting with the settings to a potentiometer and to get the optimal values out of a flight: [[SettingsErfliege...
- en/MK-Parameter/Configuration . . . 2 Treffer
- ...##########
## Text neben Bild
<<BR>>
In a total of five sets of parameters different settings can be stored in the Kopter. These can be accessed through the sticks after turning o...
- en/MK-Parameter/CamCtrl . . . 2 Treffer
- ...ger of an Sony Foto-/Video camera.
<<BR>><<BR>>
'''INFO:''' <<BR>>
You can use this settings __only__ if an __!CamCtrl ''I2C''__ is connected.<<BR>>
(More informations about the ...
- en/Jeti-Box-Profi . . . 2 Treffer
- ...#######################################################
= Info =
The here described settings and procedures are related to the actual version 1.17 Jeti.<<BR>>
You can download th...
- en/GPXViewer . . . 2 Treffer
- ...ted to Google Earth
* Additional Information from the GPX-File can be displayed (e.g Settingsinfo, Licenseinfo, Firmwareinfo)
* units will be added to the data and converted if p...
- en/FlightCtrl_ME_2_5 . . . 2 Treffer
- ...
= Receiver Connections =
'''Please be sure that the correct receiver is set in the settings under "Channels".'''
###############################################################...
- en/FlightCtrl_ME_2_2_ACC . . . 2 Treffer
- ... can be downloaded here: [[en/Firmware-0.90]]
= Check the function =
Finally, the settings and the function need to be tested.
In the MikroKopter tool the hardware version sh...